Re: ATM: Hockey Puck feet

[Bob Scholtz <rscholtz01@sprynet.com>]

I used hocky pucks on an eight inch dob that I built about 3 years ago.  I
attached them with contact cement; no other fasteners.  They're still in
their original positions after much movement and dragging over my patio and
garage.  A lot easier than all of the gyrations to drill them.

Bob

rscholtz01@sprynet.com




David McCarter wrote:

> >>using hockey pucks ...are worth the $1.50 each.
>
> I purchased hockey pucks at WalMart on the weekend, for 97 cents Canadian
> each. The Canadian dollar is currently $0.63 US. I wonder why they are so
> expensive there?
>
> > So how did you attach them?
>
> I drilled three pilot holes in a small triangle through the ground board
> and used #8 wood screws into the puck. The first was done by hand driven
> screwdriver, the rest with the driver bit in the electric drill.
>
> Dave