oDate: Sat, 05 Sep 1998 19:08:45 -0400 > From: Donn Starkey <dstarkey@star-technology.com> > Reply-To: dstarkey@star-technology.com > Subject: Re: ATM Accutrack Capability > > Chuck Shaw wrote: > > > > I thought I would try the water again with the group to see if anyone knows > > what wattage motor the old "Accutrack" Drive Correctors can handle? The > > folks at Orion do not seem to have any tech data on it (its been out of > > production too long). > > > > I have an equatorial mount with an old Bodine 1amp motor on it I want to use > > this drive corrector with. Now 120v x 1 amp is a lot of watts, and I am not > > sure the Accutrack is up to that.... If it is, I do not have to get a > > different motor. If not, I will need to get a smaller motor, but how > > small??? (answer: What is the capability of the Drive Corrector??) > > > > There are no markings on the inside of the drive corrector on any of the > > components. The 110v fuse is a 1.5 amp fuse, but that just tells me a 1 amp > > motor would be really pressing the issue..... > > > > Thanks for any help!! > > > > Chuck > My Accutrack [circ. 1975] has two outlets on the rear panel. The > marking above each outlet says "25 watts max". I am running a Hurst > Sycncor motor to druve the RA of a Mathis 500. > -- > Donn Starkey > Star Technology, Inc. > Custom Formulators of Epoxy, Urethane and > UV Cure Acrylic Adhesives and Potting Compounds > 200 Executive Drive > Waterloo, IN 46793 > 1-800-741-7833 > Web Page:"http://www.star-technology.com" > e-mail:"mailto:dstarkey@star-technology.com" -- Clear skies, Mel Bartels http://www.efn.org/~mbartels
-- BEGIN included message
- To: owner-atm@shore.net
- Subject: BOUNCE atm@shore.net: Non-member submission from [Donn Starkey <dstarkey@star-technology.com>]
- From: owner-atm@shore.net
- Date: Sat, 5 Sep 1998 20:46:32 -0400 (EDT)
>From atm-owner Sat Sep 5 20:46:28 1998 Received: from siren.shore.net (siren.shore.net [207.244.124.5]) by aquarium.shore.net (8.8.7/8.8.7) with SMTP id UAA10198 for <atm@mlist.shore.net>; Sat, 5 Sep 1998 20:46:27 -0400 (EDT) Received: from solaris1.mysolution.com [209.100.146.114] by siren.shore.net with esmtp (Exim) id 0zFSNB-0005MQ-00; Sat, 5 Sep 1998 20:08:05 -0400 Received: from i1i9o7 (miyuki2.mysolution.com [209.100.146.146]) by solaris1.mysolution.com (8.8.5/8.8.5) with SMTP id TAA16961; Sat, 5 Sep 1998 19:02:43 -0500 (EST) Message-ID: <35F1C47D.5D7E@star-technology.com> Date: Sat, 05 Sep 1998 19:08:45 -0400 From: Donn Starkey <dstarkey@star-technology.com> Reply-To: dstarkey@star-technology.com Organization: Star Technology, Inc. X-Mailer: Mozilla 3.0 (Win95; U) MIME-Version: 1.0 To: Chuck Shaw <cshaw@ghg.net> CC: ATM-List <atm@shore.net> Subject: Re: ATM Accutrack Capability References: <002a01bdd6bf$8ae36d60$47741dce@cshaw> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Chuck Shaw wrote: > > I thought I would try the water again with the group to see if anyone knows > what wattage motor the old "Accutrack" Drive Correctors can handle? The > folks at Orion do not seem to have any tech data on it (its been out of > production too long). > > I have an equatorial mount with an old Bodine 1amp motor on it I want to use > this drive corrector with. Now 120v x 1 amp is a lot of watts, and I am not > sure the Accutrack is up to that.... If it is, I do not have to get a > different motor. If not, I will need to get a smaller motor, but how > small??? (answer: What is the capability of the Drive Corrector??) > > There are no markings on the inside of the drive corrector on any of the > components. The 110v fuse is a 1.5 amp fuse, but that just tells me a 1 amp > motor would be really pressing the issue..... > > Thanks for any help!! > > Chuck My Accutrack [circ. 1975] has two outlets on the rear panel. The marking above each outlet says "25 watts max". I am running a Hurst Sycncor motor to druve the RA of a Mathis 500. -- Donn Starkey Star Technology, Inc. Custom Formulators of Epoxy, Urethane and UV Cure Acrylic Adhesives and Potting Compounds 200 Executive Drive Waterloo, IN 46793 1-800-741-7833 Web Page:"http://www.star-technology.com" e-mail:"mailto:dstarkey@star-technology.com"
-- END included message