Amateur Telescope Makers (ATM) Archive for SEP97 - by author

• Thread Index

• ATM machined mirror
  • From: "A.CUSHENAN" <aidan.cushenan8@virgin.net>
• Re: ATM End Grain Balsa Wood
  • From: "a.schaller" <a.schaller@kaiserslautern.netsurf.de>
• ATM "off-axis-slider"
  • From: "a.schaller" <a.schaller@kaiserslautern.netsurf.de>
• Re: ATM Oregon Star Party - one person's report
  • From: "Alan Cairncross" <acairnx@onaustralia.com.au>
• ATM Archives updated for August 1997
  • From: "Andy Steere" <andy@www.system.missouri.edu>
• Re: ATM Schiefspiegler
  • From: Anthony Stillman <atmer@flash.net>
• ATM Kydex Light and Dewshield For Truss-Tube Dobsonian
  • From: "Art Russell" <artrussell@mindspring.com>
• RE: ATM Finder adjustment screws
  • From: Art Russell <artrussell@mindspring.com>
• ATM Re: atm-digest V1 #859
  • From: Atmj1@aol.com
• ATM: Magnesium truss tubes?
  • From: bagheera@worldnet.att.net
• ATM semantics - Prime Focus
  • From: Barbara & Matt <B.Smerald@worldnet.att.net>
• first ATM project
  • From: barrett@almaden.ibm.com
• ATM first project: decision
  • From: barrett@almaden.ibm.com
• ATM Observatory
  • From: berthold.hamburger@ibm.net (Berthold Hamburger)
• Re: ATM Observatory
  • From: berthold.hamburger@ibm.net (Berthold Hamburger)
• Re: ATM Observatory
  • From: berthold.hamburger@ibm.net (Berthold Hamburger)
• Re: ATM Starting out & Plaster Tools
  • From: berthold.hamburger@ibm.net (Berthold Hamburger)
• Re: ATM Observatory
  • From: berthold.hamburger@ibm.net (Berthold Hamburger)
• Re: ATM Concrete Stepping Stone
  • From: Bill Marriott <btk@pacbell.net>
• Re: ATM Concrete Stepping Stone
  • From: Bill Marriott <btk@pacbell.net>
• Re: [Fwd: ATM buying the secondary]
  • From: Bill Marriott <btk@pacbell.net>
• ATM DEC-stepper on mount or tube?
  • From: bsorheim@sn.no (Bjørn Sørheim)
• FW: ATM Thermal effects and a question
  • From: bprewitt <bprewitt@neo.lrun.com>
• Re: ATM Carbon vs. Glass fiber for tube
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM Metal Washer Tools
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• ATM Source of small lenses
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• ATM Wavefront arithmetic
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• ATM Re: Wavefront arithmetic
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• ATM semantics - Prime Focus
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re : ATM Prime focus
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM Prime focus
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: Re : ATM Prime focus
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: Re : ATM Prime focus
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM RMS = 1/13.4
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM, Mirror kits and...
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• ATM: Coma corrector for large fields
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• ATM Re: Beginners View
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM Televue eyepiece data
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• ATM Re: atm-digest V1 #868
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM Front-surface mirror sources
  • From: Brian Nestel <blast@aloha.net>
• Re: Re : ATM Prime focus
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Binocular Dew Caps
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM OCTOBERFESTS/STARPARTY
  • From: Brian Nestel <blast@aloha.net>
• Re: Secondary Holders (was Re: ATM: Modifying a Meade 12.5--Try This At Home)
  • From: Bruce Swayze <swayze@europa.com>
• ATM - Oregon Star Party
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Flattening pyrex tool
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM: newbie polishing questions
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM obsidian
  • From: Bruce Swayze <swayze@europa.com>
• ATM New photos on web page
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Regrinding
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM precision of secondary mirrors
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM precision of secondary mirrors
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Starting out & Plaster Tools
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Source of small lenses
  • From: Bruce Swayze <swayze@europa.com>
• ATM Re: Secondary Holders
  • From: "Bryan Greer" <bgreer@fpi-protostar.com>
• ATM Hello All
  • From: "Bryan R.Neeley" <starman1@gvtc.com>
• Secondary Holders (was Re: ATM: Modifying a Meade 12.5--Try This At Home)
  • From: Carl Brennan <carl@pader-online.de>
• Re: ATM European Resource list
  • From: Carl Brennan <carl@pader-online.de>
• Re: ATM European Resource list
  • From: Carl Brennan <carl@pader-online.de>
• ATM Ultra-Light Dobs mounts
  • From: Carl Woebcke <carlw@telis.org>
• ATM Eyepieces
  • From: Carl Woebcke <carlw@telis.org>
• ATM 1" OD thin wall ALUMINUM TUBING
  • From: Carl Woebcke <carlw@telis.org>
• ATM WEIGHT of JMI NGF-2 focuser
  • From: Carl Woebcke <carlw@telis.org>
• ATM 0.035" wall-thickness TRUSS TUBING
  • From: Carl Woebcke <carlw@telis.org>
• ATM using a TV 2" Big Barlow with a 3x TV Barlow
  • From: Carl Woebcke <carlw@telis.org>
• ATM Light diminuation in Barlows?!
  • From: Carl Woebcke <carlw@telis.org>
• ATM Can one use 0.035" wall-thickness truss tubing?
  • From: Carl Woebcke <carlw@telis.org>
• ATM Panoptic Barlow Interface
  • From: Carl Woebcke <carlw@telis.org>
• ATM Eyepiece and barlow combinations
  • From: Carl Woebcke <carlw@telis.org>
• ATM Re: re : 1/60th wave
  • From: Carl Woebcke <carlw@telis.org>
• Re: ATM Re: re : 1/60th wave
  • From: Carl Woebcke <carlw@telis.org>
• ATM FROM John A. Hudek @ Galaxy optics, RE: Carl Woebcke's 18" Optic
  • From: Carl Woebcke <carlw@telis.org>
• ATM computer chip
  • From: Cary Chleborad <bennu@ns.net>
• ATM Binocular Chairs
  • From: "Castle, Robert LCDR" <RCastle@comdt.uscg.mil>
• ATM Coach Potato Binocular Chair
  • From: "Castle, Robert LCDR" <RCastle@comdt.uscg.mil>
• ATM Addendum to previous posting
  • From: "Castle, Robert LCDR" <RCastle@comdt.uscg.mil>
• RE: ATM End Grain Balsa Wood
  • From: cnebark@ix.netcom.com (Chris & Elizabeth Barker)
• ATM Off the shelf optics
  • From: cnebark@ix.netcom.com (Chris & Elizabeth Barker)
• Re: ATM Ultra-Light Dobs mounts
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Ultra-Light Dobs mounts
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Ultra-Light Dobs mounts
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Ultra-Light Dobs mounts
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Ultra-Light Dobs mounts
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [RRedden506@aol.com]]
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM RE: Solar Scheifspiegler?
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [RRedden506@aol.com]]
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM spectrohelioscope (was bounced ...)
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Thermal effects and a question
  • From: "Christine J. Killian" <Christine.J.Killian@cdc.com>
• Re: ATM Observatory
  • From: Christopher Scott <CJScott@worldnet.att.net>
• ATM Slightly Off-Topic - The Tragic life and Death of RobertBurnham Jr.
  • From: CHUCK MORFORD <MORFORD.CHUCK@EPAMAIL.EPA.GOV>
• Re: ATM Choice of Mirror Kits
  • From: "Claton Cadmus" <aplitech@spacestar.net>
• Re: ATM Choice of Mirror Kits
  • From: "Claton Cadmus" <aplitech@spacestar.net>
• ATM washer tool question
  • From: Claude Serquet <claude@zugernet.ch>
• RE: ATM eyepiece armor
  • From: Curt Thompson <curt.thompson@attws.com>
• RE: ATM Unit power finder info
  • From: Curt Thompson <curt.thompson@attws.com>
• RE: ATM Unit power finder info
  • From: Curt Thompson <curt.thompson@attws.com>
• ATM RE: analog encoders
  • From: Curt Thompson <curt.thompson@attws.com>
• ATM Variation on Randy's Theme (Hydrocal tools)
  • From: CZambuto@aol.com
• Re: ATM Transverse Aberration or Wavefront Error?
  • From: CZambuto@aol.com
• Re: ATM Magnification?
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM, Mirror kits and...
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM, Mirror kits and...
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: Fw: ATM, Mirror kits and...
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM, Mirror kits and...
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM, Mirror kits and...
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM Re: re : 1/60th wave
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM focuser placement
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM focuser placement
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM Coating places and "Ebony Star"
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: first ATM project
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM precision of secondary mirrors
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM, Mirror kits and...
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: Homemade Eq. Mount for Beginners, was RE: ATM, mirror kits...
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: Beginners View (was Re: ATM, Mirror kits and...)
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM RE: Beginner's View
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM A long post ...
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM semantics - Prime Focus
  • From: "Dave Allmon" <dallmon@feist.com>
• Re: ATM Balsa Wood w/important atm link
  • From: Dave Allmon <dallmon@feist.com>
• Re: Re : ATM Prime focus
  • From: Dave Allmon <dallmon@feist.com>
• Re: ATM: Modifying a Meade 12.5--Try This At Home
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM pitch spilled in fabric
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM Interferometry at Stellafane, and elsewhere
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM Choice of Mirror Kits
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM unusual chinks appear in fine grinding
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM: Thermal effects and Cervit.
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• ATM Re-coating mirrors
  • From: Dave Parker <parkdav@xnet.com>
• Re: ATM Carbon vs. Glass fiber for tube
  • From: "Dave Pitou" <dpitou@ix.netcom.com>
• Re: ATM Carbon vs. Glass fiber for tube
  • From: "Dave Pitou" <dpitou@ix.netcom.com>
• Re: Secondary Holders (was Re: ATM: Modifying a Meade 12.5--TryThis At Home)
  • From: "Dave Pitou" <dpitou@ix.netcom.com>
• Re: ATM bearing size - fork mounts
  • From: "Dave Pitou" <dpitou@ix.netcom.com>
• Re: ATM Carbon vs. Glass fiber for tube
  • From: "Dave Pitou" <dpitou@ix.netcom.com>
• Re: first ATM project
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Can one use 0.035" wall-thickness truss tubing?
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM: Magnesium truss tubes?
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Hello All
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Astrofest
  • From: "David B. Toth" <ve3gyq@amsat.org>
• ATM: Viewing at 1000X Plus at OSP
  • From: David Brooks <davidbr@microsoft.com>
• ATM Re: Secondary Holders
  • From: David Brooks <davidbr@microsoft.com>
• ATM unusual chinks appear in fine grinding
  • From: djd@localnet.com.au (david donaldson)
• RE: ATM Carbon vs. Glass fiber for tube
  • From: "David J. File" <davefile@compuserve.com>
• ATM Carbon vs. Glass fiber for tube
  • From: "David J. File" <davefile@compuserve.com>
• ATM Looking for a lense maker
  • From: "David J. File" <davefile@compuserve.com>
• Re: ATM End Grain Balsa Wood
  • From: "David J. File" <davefile@compuserve.com>
• Re: ATM Balsa Wood
  • From: "David J. File" <davefile@compuserve.com>
• ATM: Magnesium truss tubes?
  • From: "David J. File" <davefile@compuserve.com>
• ATM re: flocking paper
  • From: "David J. File" <davefile@compuserve.com>
• ATM Re: Observatory
  • From: dennisf@micron.net
• ATM Information request
  • From: Dietmar William Foryta <foryta@fisica.ufpr.br>
• Re: Secondary Holders (was Re: ATM: Modifying a Meade 12.5--TryThis At Home)
  • From: dhalter@ghg.net (Don Halter)
• Re: ATM Truss telescopes
  • From: dhalter@ghg.net (Don Halter)
• Homemade Eq. Mount for Beginners, was RE: ATM, mirror kits...
  • From: don.h.young@lmco.com
• ATM eyepiece armor
  • From: Donald Clement <clement@cqt.com>
• Re: ATM "Focaultgrams" images
  • From: Donald Clement <clement@cqt.com>
• Re: ATM: analog encoders
  • From: Donald Clement <clement@cqt.com>
• ATM Calculation of Prime Focus.
  • From: Donn Starkey <dstarkey@solaris1.mysolution.com>
• ATM Field flattness with a 4x5 camera on a C-14
  • From: Donn Starkey <dstarkey@solaris1.mysolution.com>
• ATM Focusing Accuracy
  • From: "Douglas Arion, Prof. Physics" <ariond1@carthage.edu>
• ATM 20" mirror is getting fixed
  • From: "Douglas H. Bock" <dougbock@kode.net>
• Re: ATM Periodic Error Measurement
  • From: "dpitou" <dpitou@ix.netcom.com>
• Re: ATM Orion shaft encoders
  • From: "dpitou" <dpitou@ix.netcom.com>
• Re: ATM Focusing Accuracy
  • From: "dpitou" <dpitou@ix.netcom.com>
• Re: ATM Starting out & Plaster Tools
  • From: "DR. BRENT SAFRONIUK" <bsaf@agt.net>
• Re: ATM remote PC operation
  • From: "Ed Hood" <aes@southwind.net>
• ATM Where do I grind a mirror?
  • From: "Ed Muhlestein (Geo Man)" <edm@zycor.lgc.com>
• ATM Schiefspiegler
  • From: Emil Johnsen <emiljo@online.no>
• ATM re : 1/60th wave
  • From: epabcc@epa.ericsson.se (epabcc@brsw342)
• ATM Re: re : 1/60th wave
  • From: epabcc@epa.ericsson.se (epabcc@brsw342)
• ATM Beginner's and other views
  • From: epabcc@epa.ericsson.se (epabcc@brsw342)
• Re: ATM Newbie Polishing Question
  • From: epabcc@epa.ericsson.se (epabcc@brsw342)
• ATM re : A long post ... (and even longer heading)
  • From: epabcc@epa.ericsson.se (epabcc@brsw342)
• ATM Re: A long post ...
  • From: epabcc@epa.ericsson.se (epabcc@brsw342)
• Re: ATM A long post ...
  • From: epabcc@epa.ericsson.se (epabcc@brsw342)
• Re: ATM fully illuminated
  • From: epabcc@epa.ericsson.se (epabcc@brsw342)
• ATM Edmund's Flocking Paper (was ATM Unit power finder info)
  • From: "Erik L. Przekop" <eprzekop@horiba.com>
• ATM Observing Chair?
  • From: "Erik L. Przekop" <eprzekop@horiba.com>
• ATM cheap and easy Lyot test
  • From: espector@mlswc.uk.lucent.com
• ATM precision of secondary mirrors
  • From: "Fabio Falchi" <falchif@tin.it>
• ATM atm supply in quebec
  • From: "François Gauthier" <jlavoie@infoteck.qc.ca>
• ATM, Mirror kits and...
  • From: "G Hooper" <sixppc@unix.asb.com>
• Re: ATM, Mirror kits and...
  • From: "G Hooper" <sixppc@unix.asb.com>
• Re: ATM, Mirror kits and...
  • From: "G Hooper" <sixppc@unix.asb.com>
• Fw: ATM, Mirror kits and...
  • From: "G Hooper" <sixppc@unix.asb.com>
• Re: ATM, Mirror kits and...
  • From: "G Hooper" <sixppc@unix.asb.com>
• Fw: ATM, Mirror kits and...
  • From: "G Hooper" <sixppc@unix.asb.com>
• ATM Thermal effects and a question
  • From: "G Hooper" <sixppc@unix.asb.com>
• ATM bearing size - fork mounts
  • From: Gary McKenzie <aquarius@netspace.net.au>
• Re: ATM Fixing a Celestron Starhopper
  • From: Gary Seronik <gseronik@direct.ca>
• Re: Re : ATM Prime focus
  • From: Gary Seronik <gseronik@direct.ca>
• Re: Re : ATM Prime focus
  • From: Gary Seronik <gseronik@direct.ca>
• Re: ATM, Mirror kits and...
  • From: Gary Seronik <gseronik@direct.ca>
• ATM Robert Burnham Jr. (No TM content)
  • From: Gary Seronik <gseronik@direct.ca>
• ATM observatory designs,looking for ideas
  • From: "GARY SLAK" <gslak@javanet.com>
• Re: ATM remote PC operation
  • From: "GARY SLAK" <gslak@javanet.com>
• Re: ATM Coach Potato Binocular Chair
  • From: Gary Wolanski <gary_wolanski@bc.sympatico.ca>
• Re: ATM Info on plate glass.... what is it actually ??
  • From: Gene <dfrancon@swbell.net>
• ATM Orion shaft encoders
  • From: "George & Jeanine LaBelle" <glabelle@teleport.com>
• ATM Marble for mirrors?
  • From: "George & Jeanine LaBelle" <glabelle@teleport.com>
• ATM Info on plate glass.... what is it actually ??
  • From: "Gerald Hubacek, studmail, FB02" <HUBACEK@hrz1.hrz.th-darmstadt.de>
• Re: ATM Concrete Stepping Stone
  • From: Gil Stacy <gstacy@premierweb.net>
• ATM polishing pads
  • From: "Glen Bankston" <microsys@alltel.net>
• Re: ATM: Tube Lining material
  • From: gleny@pacbell.net
• ATM RE: Beginner's View
  • From: Gord Seifert <gseifert@uniserve.com>
• ATM Coating places and "Ebony Star"
  • From: Gordon Baldwin <gbaldw@illuminetSS7.com>
• Re: Secondary Holders (was Re: ATM: Modifying a Meade 12.5--TryThis At Home)
  • From: Greg Furtman <gfurtman@spacestar.net>
• ATM Re: Secondary Holders
  • From: Greg Granville <greg@laser.arl.psu.edu>
• re:ATM Where do I grind a mirror?
  • From: Howard.Banich@nike.com
• re:Re: ATM precision of secondary mirrors
  • From: Howard.Banich@nike.com
• re:ATM Mirror figuring
  • From: Howard.Banich@nike.com
• re:ATM Light diminuation in Barlows?!
  • From: Howard.Banich@nike.com
• re:ATM Panoptic Barlow Interface
  • From: Howard.Banich@nike.com
• re:ATM Eyepiece and barlow combinations
  • From: Howard.Banich@nike.com
• re:ATM Truss telescopes
  • From: Howard.Banich@nike.com
• ATM: Thermal effects and Cervit.
  • From: Howard.Banich@nike.com
• re:ATM eyepiece armor
  • From: Howard.Banich@nike.com
• Re: ATM pitch spilled in fabric
  • From: "Hugues Laroche"<Hugues_Laroche@aia.com>
• Re: ATM Starting out & Plaster Tools
  • From: "Hugues Laroche"<Hugues_Laroche@aia.com>
• Re: ATM Info on plate glass.... what is it actually ??
  • From: "Hugues Laroche"<Hugues_Laroche@aia.com>
• ATM Pins of Celestron-14 RA drive
  • From: "Hugues Laroche"<Hugues_Laroche@aia.com>
• Re: ATM Ultra-Light Dobs mounts
  • From: Hugues_Laroche@aia.com
• Re: ATM European Resource list
  • From: Hugues_Laroche@aia.com
• Re: ATM Where do I grind a mirror?
  • From: Hugues_Laroche@aia.com
• Re: ATM European Resource list
  • From: Hugues_Laroche@aia.com
• Re: ATM Laser collimator - hole size
  • From: Hugues_Laroche@aia.com
• Re: ATM Field flattness with a 4x5 camera on a C-14
  • From: Hugues_Laroche@aia.com
• Re: ATM, Mirror kits and...
  • From: Hugues_Laroche@aia.com
• ATM Unusual blank material
  • From: Hugues_Laroche@aia.com
• Re: ATM Info on plate glass.... what is it actually ??
  • From: Hugues_Laroche@aia.com
• Re: ATM Periodic Error Measurement
  • From: iss@pvtnetworks.net
• Re: ATM Tools
  • From: iss@pvtnetworks.net
• Re: ATM, Mirror kits and...
  • From: iss@pvtnetworks.net
• Re: ATM Re: Coma corrector for large fields
  • From: iss@pvtnetworks.net
• ATM Televue eyepiece data
  • From: iss@pvtnetworks.net
• Re: ATM another question
  • From: iss@pvtnetworks.net
• Re: ATM Edmund's Flocking Paper (was ATM Unit power finder info)
  • From: iss@pvtnetworks.net
• Re: ATM: Thermal effects and Cervit.
  • From: iss@pvtnetworks.net
• ATM remote PC operation
  • From: iss@pvtnetworks.net
• Re: ATM remote PC operation
  • From: iss@pvtnetworks.net
• ATM: astrosystems encoder info
  • From: fieldsj@coned.com (J FIELDS)
• ATM: analog encoders
  • From: fieldsj@coned.com (J FIELDS)
• Re: ATM Schiefspiegler
  • From: jerry@cts4.europe.dg.com (j.royston)
• ATM Tasco Power
  • From: Jack Schmidling <arf@mc.net>
• ATM Flatening tools
  • From: Jack Schmidling <arf@mc.net>
• ATM Prime Focus
  • From: Jack Schmidling <arf@mc.net>
• ATM Machine polishing
  • From: Jack Schmidling <arf@mc.net>
• ATM Good News, Bad News
  • From: Jack Schmidling <arf@mc.net>
• ATM OCTOBERFESTS/STARPARTY
  • From: Jack Schmidling <arf@mc.net>
• ATM Equatorial Mounts
  • From: jklutts@up.net (James A. Klutts)
• ATM Barlow Extensions
  • From: jklutts@up.net (James A. Klutts)
• Re: ATM Off the shelf optics
  • From: "James E. Gort" <gort@sonetis.com>
• Re: ATM 1" OD thin wall ALUMINUM TUBING
  • From: "James F. Heilman" <heilman@netside.com>
• Re: ATM Choice of Mirror Kits
  • From: "James F. Heilman" <heilman@netside.com>
• ATM Light Sheilds for Dobs
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• ATM Re-Strut Mounts
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• ATM RE- ENDGRAIN BALSA
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• ATM Re - Thin wall tubing
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• ATM RMS = 1/13.4
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM RMS = 1/13.4
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Transverse Aberration or Wavefront Error?
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM: Mirror Polish Testing
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM WRMS - Third View.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Newbie Polishing Question
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM Foucault Processing Program, Ver. 3.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Re: re : 1/60th wave
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM: A long post ...
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM cassegrain
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM First time polishing - when to stop a wet, chipped pitch
  • From: zikovsky@geocities.com (Janik Zikovsky)
• Re: ATM Has the silicon adhesive dried? & astrophotos taken with different aperature?
  • From: Jean Marc Becker <Jean-Marc.Becker@wanadoo.fr>
• Re: ATM Re-coating mirrors
  • From: Jean Marc Becker <Jean-Marc.Becker@wanadoo.fr>
• Re: ATM precision of secondary mirrors
  • From: "Jeff Baldwin" <bald@gotnet.net>
• ATM Richard Roach
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM, Mirror kits and...
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM semantics - Prime Focus
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Unusual blank material
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Unusual blank material
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Unusual blank material
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM "Focaultgrams" images
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM polishing pads
  • From: "Jeff Baldwin" <bald@gotnet.net>
• ATM Re: Coma corrector for large fields
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM unusual chinks appear in fine grinding
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM unusual chinks appear in fine grinding
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Televue eyepiece data
  • From: "Jeff Baldwin" <bald@gotnet.net>
• ATM Re: Baldman sightings
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM unusual chinks appear in fine grinding
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM another question
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Unusual blank material
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: Beginners View (was Re: ATM, Mirror kits and...)
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Televue eyepiece data
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Re: Beginners View
  • From: "Jeff Baldwin" <bald@gotnet.net>
• ATM Re: Slumping
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM polishing pads
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM: Mirror Polish Testing
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM polishing pads
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM RE: Beginner's View
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Eyepiece and barlow combinations
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Hello All
  • From: "Jeff Baldwin" <bald@gotnet.net>
• ATM Re: Slumping
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM fully illuminated
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Thermal effects and a question
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Re: Secondary Holders
  • From: Jeff Medkeff <medkeff@sinosa.com>
• Re: ATM Calculation of Prime Focus.
  • From: Jeff Medkeff <medkeff@sinosa.com>
• Re: ATM semantics - Prime Focus
  • From: Jeff Medkeff <medkeff@sinosa.com>
• Re: Re : ATM Prime focus
  • From: Jeff Medkeff <medkeff@sinosa.com>
• Re: ATM Marble for mirrors?
  • From: Jeff Medkeff <medkeff@sinosa.com>
• Re: ATM Robert Burnham Jr. (No TM content)
  • From: Jeff Medkeff <medkeff@sinosa.com>
• Re: ATM focuser placement
  • From: Jeff Medkeff <medkeff@sinosa.com>
• Re: ATM remote PC operation
  • From: Jeff Medkeff <medkeff@sinosa.com>
• Re: ATM remote PC operation
  • From: Jeff Medkeff <medkeff@sinosa.com>
• ATM star-test
  • From: JHM.van.Gastel@psy.vu.nl
• ATM Saturn Occulation
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM Unit power finder info
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM pinhole
  • From: "Jim Fly" <jfly@hiwaay.net>
• ATM Re: Backback telescope
  • From: Joe Campbell <jcampb@mindspring.com>
• ATM Re: atm-digest V1 #848
  • From: Joe Larkin <jlarkin@routh.list.ufl.edu>
• ATM Book sighting in Oregon
  • From: John Anderson <jaanders@europa.com>
• Re: ATM Book sighting in Oregon
  • From: John Anderson <jaanders@europa.com>
• Re: first ATM project
  • From: John C Delacy <johndel@mdhost.cse.tek.com>
• Re: ATM RE: Beginner's View
  • From: John C Delacy <johndel@mdhost.cse.tek.com>
• Re: ATM Carbon vs. Glass fiber for tube
  • From: "John D. Gwinner" <gwinner@northnet.org>
• ATM: Tube Lining material
  • From: "John D. Gwinner" <gwinner@northnet.org>
• ATM D&G Optical?
  • From: ic089@cleveland.Freenet.Edu (John H. Svensson)
• Re: ATM Carbon vs. Glass fiber for tube
  • From: "Jon H. Peterson" <jon@osisoft.com>
• Re: ATM focuser placement
  • From: Jonathan Lavoie <jlavoie@infoteck.qc.ca>
• ATM Alternative eyepiece
  • From: Jose Amaury Pereira <jamaury@elogica.com.br>
• ATM Silicone RTV stiffness
  • From: "Kasunich, John" <jk@rrc.reliance.rockwell.com>
• ATM Truss Tube Attachment
  • From: "Kasunich, John" <jk@rrc.reliance.rockwell.com>
• ATM Astrofest
  • From: Ken and Teresa Lilja <klilja@enteract.com>
• ATM Mirror figuring
  • From: Ken and Teresa Lilja <klilja@enteract.com>
• RE: ATM fwd msg from Ed Turco
  • From: Ken Carter <kencar@worldnet.att.net>
• Re: ATM Re: Secondary Holders
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM cheap and easy Lyot test
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM: newbie polishing questions
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Solar Schiefspiegler?
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Observatory
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Observatory
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM precision of secondary mirrors
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM first project: decision
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Choice of Mirror Kits
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: Re : ATM Prime focus
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Prime focus
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM, Mirror kits and...
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM "Focaultgrams" images
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Foucault tests
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM re : 1/60th wave
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM focuser placement
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM First time polishing - when to stop a wet, chipped pitch
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• RE: ATM polishing pads
  • From: kf <kevin@aquilagroup.com>
• ATM Ritchy Common test discription
  • From: kf <kevin@aquilagroup.com>
• Re: ATM eyepiece and barlow combinations
  • From: Klaus-Peter Schroeder <schroder@weizen.physik.TU-Berlin.DE>
• Re: ATM Oregon Star Party - one person's report
  • From: Kreig McBride <kmcbride@memes.com>
• ATM obsidian
  • From: Kreig McBride <kmcbride@memes.com>
• Re: ATM bearing size - fork mounts
  • From: Kurt Hillig <khillig@umich.edu>
• Re: ATM Fixing a Celestron Starhopper
  • From: Kurt Hillig <khillig@umich.edu>
• Re: ATM Remedial classes for a Starhopper
  • From: Kurt Hillig <khillig@umich.edu>
• Re: ATM pitch spilled in fabric
  • From: Kurt Hillig <khillig@umich.edu>
• RE: ATM eyepiece armor
  • From: Kurt Hillig <khillig@umich.edu>
• Re: ATM Info on plate glass.... what is it actually ??
  • From: Kurt Hillig <khillig@umich.edu>
• Re: ATM re:alternative mirror substrates
  • From: Kurt Hillig <khillig@umich.edu>
• ATM Finder adjustment screws
  • From: kbarger@haverford.edu (Kyle Barger)
• Re: ATM collimation & first star test
  • From: Kyle Barger <kbarger@haverford.edu>
• Re: Secondary Holders (was Re: ATM: Modifying a Meade 12.5--Try This At Home)
  • From: Kyle Barger <kbarger@haverford.edu>
• Re: ATM Choice of Mirror Kits
  • From: Kyle Barger <kbarger@haverford.edu>
• ATM Binoculars --> finders
  • From: Kyle Barger <kbarger@haverford.edu>
• ATM Transverse Aberration or Wavefront Error?
  • From: "Larry W. Phillips" <lwphillips@lucent.com>
• ATM WTB: binocular eye cups.
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: ATM WTB: binocular eye cups: Final: Orion & Univ. Optics.
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: ATM WTB: binocular eye cups: Final: Edmund, Orion & Univ. Optics.
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• ATM C102 -> Widefield.
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• ATM focuser placement
  • From: Le chat <ahollidg@virtu.sar.usf.edu>
• Re: ATM Re-coating mirrors
  • From: LENSES@aol.com
• ATM NGF-mini4 focuser
  • From: "LOH KWONG TIEN" <opencluster478@infoedge.com.sg>
• RE: ATM Has the silicon adhesive dried?
  • From: lolkovic@sfu.ca
• ATM Windows Foucault data analysis software: BETA TESTERS REQ'D
  • From: lr@paralynx.com
• ATM Newtonian tube fan experimental results
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• ATM D&G Optical
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM Has the silicon adhesive dried?
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• ATM Remedial classes for a Starhopper
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM Truss Tube Attachment
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM Solar Schiefspiegler?
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM 1" OD thin wall ALUMINUM TUBING
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM using a TV 2" Big Barlow with a 3x TV Barlow
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM Light diminuation in Barlows?!
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM Can one use 0.035" wall-thickness truss tubing?
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM re: eq mount for beginners
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• ATM European Resource list
  • From: "Mag. Wolfgang Birkfellner" <wbirk@mamba.bmtp.akh-wien.ac.at>
• ATM: Modifying a Meade 12.5--Try This At Home
  • From: Mark Cowan <cowanm@open.org>
• Re: Secondary Holders (was Re: ATM: Modifying a Meade 12.5--Try This At Home)
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Carbon vs. Glass fiber for tube
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Interferometers-Scatterplates
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Interferometers-Scatterplates II
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Interferometers-Scatterplates II
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM cheap and easy Lyot test
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM cheap and easy Lyot test--Interferometers from Soot?
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM precision of secondary mirrors
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Laser collimator - hole size
  • From: Mark Cowan <cowanm@open.org>
• ATM: A Ronchi test image + Calculated overlay
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Prime focus
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM focuser placement
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM focuser placement
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Thermal effects and a question
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Thermal effects and a question
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Focuser Location
  • From: Mark Cowan <cowanm@open.org>
• RE: ATM RE: Beginner's View
  • From: Mark Salter <salter7@pe.net>
• ATM pitch spilled in fabric
  • From: bj712@scn.org (Mark Zemanek)
• ATM re:alternative mirror substrates
  • From: bj712@scn.org (Mark Zemanek)
• ATM focuser placement
  • From: bj712@scn.org (Mark Zemanek)
• ATM Thanks (again)
  • From: bj712@scn.org (Mark Zemanek)
• Re: ATM Observatory
  • From: mark.kaye@sympatico.ca
• The ATM Page - Announcement
  • From: "Mathew A. Marulla" <atm@tiac.net>
• Re: ATM Choice of Mirror Kits
  • From: "Mathew A. Marulla" <atm@tiac.net>
• RE: ATM spectrohelioscope
  • From: "Mathew A. Marulla" <atm@tiac.net>
• ATM Journal News
  • From: "Mathew A. Marulla" <atm@tiac.net>
• RE: ATM Scope Help/ Advice
  • From: "Mathew A. Marulla" <atm@tiac.net>
• RE: ATM Orion shaft encoders
  • From: "Mathew A. Marulla" <atm@tiac.net>
• RE: ATM another question
  • From: "Mathew A. Marulla" <atm@tiac.net>
• RE: ATM Orion shaft encoders
  • From: "Mathew A. Marulla" <atm@tiac.net>
• ATM Ronchi test question
  • From: Matt Devine <mdevine@nuera.com>
• ATM fwd: Ronchi test question
  • From: Matt Devine <mdevine@nuera.com>
• RE: ATM Has the silicon adhesive dried?
  • From: Matt Devine <mdevine@nuera.com>
• ATM Collimating question
  • From: Matt Devine <mdevine@nuera.com>
• ATM collimating question re: offsets
  • From: Matt Devine <mdevine@nuera.com>
• ATM Truss telescopes
  • From: Matthew Enroth <menroth@lamar.Colostate.EDU>
• ATM fully illuminated
  • From: Matìas Gimeno Fillol <matiasg@ctv.es>
• ATM fully illuminated
  • From: Matìas Gimeno Fillol <matiasg@ctv.es>
• ATM: Coma corrector for large fields
  • From: Mauritz Andersson <mauritz@kvac.uu.se>
• Re: ATM: Coma corrector for large fields
  • From: Mauritz Andersson <mauritz@kvac.uu.se>
• ATM Front-surface mirror sources
  • From: mconsidine@wesleyan.edu
• ATM Oregon Star Party - one person's report
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Oregon Star Party - one person's report
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM fwd: Ronchi test question
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM: Viewing at 1000X Plus at OSP
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM machined mirror
  • From: Mel Bartels <mbartels@efn.org>
• ATM urls for new atm pages
  • From: Mel Bartels <mbartels@efn.org>
• ATM attempt to recover lost e-mail
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Re-coating mirrors
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM star-test
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Collimating question
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Bjørn Sørheim <bsoerhei@online.no>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM: newbie polishing questions
  • From: Mel Bartels <mbartels@efn.org>
• ATM changed url for ultra light dob page
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Paul Shankland <pshankla@jiatfe.org>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM DEC-stepper on mount or tube?
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Dan Gray <grayarea@teleport.com>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Choice of Mirror Kits
  • From: Mel Bartels <mbartels@efn.org>
• Re: first ATM project
  • From: Mel Bartels <mbartels@efn.org>
• Re: first ATM project
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [RRedden506@aol.com]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Eyepieces
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM pitch spilled in fabric
  • From: Mel Bartels <mbartels@efn.org>
• ATM Image the Sky 97, CCD conference in Salem Oregon
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM first project: decision
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Magnification?
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Light diminuation in Barlows?!
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Mirror figuring
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Beginners questions
  • From: Mel Bartels <mbartels@efn.org>
• ATM PEC analysis
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM, Mirror kits and...
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM unusual chinks appear in fine grinding
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Orion shaft encoders
  • From: Mel Bartels <mbartels@efn.org>
• ATM new webpage
  • From: Mel Bartels <mbartels@efn.org>
• ATM Re: Fitting a paraboloid
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["Michael J. Coslo" <mjc5@email.psu.edu>]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Greg Furtman <gfurtman@spacestar.net>]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [johnson@srsc.org (Jim Johnson)]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM another question
  • From: Mel Bartels <mbartels@efn.org>
• ATM from the list owner: a comment
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Robert Burnham Jr. (No TM content)
  • From: Mel Bartels <mbartels@efn.org>
• ATM Image97 is a go
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM remote PC operation
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM fully illuminated
  • From: Mel Bartels <mbartels@efn.org>
• ATM cheap and easy Lyot test
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM cheap and easy Lyot test
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM cheap and easy Lyot test
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM Truss Tube Attachment
  • From: papilio1@juno.com (michael a pankratz)
• ATM RE: Truss tube connections
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM End Grain Balsa Wood
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM Balsa Wood w/important atm link
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM End Grain Balsa Wood
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM Balsa Wood w/important atm link
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM Balsa Wood w/important atm link
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM Televue eyepiece data
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM Televue eyepiece data: correction
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM Televue eyepiece data
  • From: papilio1@juno.com (michael a pankratz)
• Re: ATM: Mirror Polish Testing
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• ATM Newbie Polishing Question
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM RE: Beginner's View
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Thermal effects and a question
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Thermal effects and a question
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Thermal effects and a question
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Thermal effects and a question
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• ATM Advise on wxproof storage
  • From: mkoloski@orednet.org (Michael Koloski)
• ATM: newbie polishing questions
  • From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
• Re: ATM Choice of Mirror Kits
  • From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
• Re: ATM Truss clamp ideas
  • From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
• ATM Generating Couder Masks
  • From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
• ATM Looking for authors of TEX, and thanks for polishing help
  • From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
• ATM off-topic
  • From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
• Re: ATM Schiefspiegler
  • From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
• Re: ATM remote PC operation
  • From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
• ATM references on collimating binoculars
  • From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
• Re: ATM Where do I grind a mirror?
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM semantics - Prime Focus
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Marble for mirrors?
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Fixing a Celestron Starhopper
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM pitch spilled in fabric
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM another question
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM focuser placement
  • From: spooner@page.az.net (Michael Spooner)
• ATM Magellan I Digital Setting Circles; Tech Assist?
  • From: "Michael Vineyard" <mvineyard@emry.net>
• Re: ATM Newbie Polishing Question
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Making non-illuminated crosshairs illuminated
  • From: Mike McKee <mckee@ix.netcom.com>
• ATM My Scope
  • From: Mike Pence <mpence@avalon.net>
• Re: ATM Fixing a Celestron Starhopper
  • From: MMirot@aol.com
• Re: ATM Ultra-Light Dobs mounts
  • From: MMirot@aol.com
• Re: ATM spectrohelioscope (was bounced ...)
  • From: MMirot@aol.com
• ATM buying the secondary
  • From: "Nik Cain" <N.J.Cain@sheffield.ac.uk>
• SV: ATM Ultra-Light Dobs mounts
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Ultra-Light Dobs mounts
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Ultra-Light Dobs mounts
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Stepper-motor circuit
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM Binoculars --> finders
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM More on beginners view
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM A long post about diffraction limited optics
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM re : A long post ... (and even longer heading)
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Re: re : 1/60th wave
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM SV: Barlow extensions
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM re : A long post ...
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Re: A long post ...
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM Focusing Accuracy
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM A follow up on the silicone adhesive question
  • From: "Olle Eriksson" <olle.eriksson@norrkoping.mail.telia.com>
• ATM First light!
  • From: "Olle Eriksson" <olle.eriksson@norrkoping.mail.telia.com>
• ATM Stepper-motor circuit
  • From: "Olle Eriksson" <olle.eriksson@norrkoping.mail.telia.com>
• ATM About the circuit board
  • From: "Olle Eriksson" <olle.eriksson@norrkoping.mail.telia.com>
• ATM New photos AND The ignore/remove e-mails
  • From: "Olle Eriksson" <olle.eriksson@norrkoping.mail.telia.com>
• Re: ATM RE: Beginner's View
  • From: Paul Pomes <ppomes@qualcomm.com>
• ATM Total Lunar Eclipse LIVE
  • From: Payet Thierry <th.payet@guetali.fr>
• ATM Periodic Error Measurement
  • From: Peter <kitgears@kitgear.com>
• Re: ATM Solar Schiefspiegler?
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM re:alternative mirror substrates
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM Schiefspiegler
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM Unit power finder info
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM Long Focus Mirror
  • From: notpete@scn.org (Peter Hirtle)
• ATM Re: Use of "Bars Leaks"
  • From: "Peter J. Thomas" <pjthomas@snet.net>
• ATM apology: Bar Leaks
  • From: "Peter J. Thomas" <pjthomas@snet.net>
• ATM Flattening pyrex tool
  • From: "Peter J. Thomas" <pjthomas@snet.net>
• Re: ATM cheap and easy Lyot test
  • From: PK6811S@ACAD.DRAKE.EDU
• ATM MGI Project
  • From: polaris@gsinet.net
• ATM Truss clamp ideas
  • From: Pshankland@flakeysol.com
• ATM RE: Beginner's View
  • From: Pshankland@flakeysol.com
• ATM Large dob.
  • From: rjrogers2@juno.com (Randy J Rogers)
• Re: ATM D&G Optical?
  • From: Randy Johnson <randyj@nwlink.com>
• Re: ATM Re-coating mirrors
  • From: Randy Johnson <randyj@nwlink.com>
• Re: first ATM project
  • From: Randy Johnson <randyj@nwlink.com>
• Re: ATM Hydrocal and plaster (was Choice of Mirror Kits)
  • From: Randy Johnson <randyj@nwlink.com>
• Re: ATM Schiefspiegler
  • From: Randy Johnson <randyj@nwlink.com>
• ATM Fixing a Celestron Starhopper
  • From: Ray Nancoz <rpnancoz@mail.wiscnet.net>
• Re: ATM: Tube Lining material
  • From: Redwad <redwad@telebyte.net>
• Re: ATM pitch spilled in fabric
  • From: Redwad <redwad@telebyte.net>
• Re: ATM Can one use 0.035" wall-thickness truss tubing?
  • From: Redwad <redwad@telebyte.net>
• Re: ATM Interferometers-Scatterplates II
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Interferometers-Scatterplates II
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Interferometers-Scatterplates II
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Interferometers-Scatterplates II
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Unusual blank material
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM: Coma corrector for large fields
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• ATM Polishing, polishing....
  • From: Ricardo Dunna <rdunna@apit.furnas.gov.br>
• ATM "Focaultgrams" images
  • From: Ricardo Dunna <rdunna@apit.furnas.gov.br>
• Re: ATM "Focaultgrams" images
  • From: Ricardo Dunna <rdunna@apit.furnas.gov.br>
• Re: ATM RE: Beginner's View
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re : ATM Prime focus
  • From: Richard Klappal <klappal@xnet.com>
• ATM Concrete Stepping Stone
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Concrete Stepping Stone
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Book sighting in Oregon
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Has the silicon adhesive dried?
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Has the silicon adhesive dried?
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Interferometers-Scatterplates II
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Choice of Mirror Kits
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Observatory
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Choice of Mirror Kits
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Choice of Mirror Kits
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Finder adjustment screws
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM unusual chinks appear in fine grinding
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM re : A long post ... (and even longer heading)
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM re : A long post ...
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM fully illuminated
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Thermal effects and a question
  • From: Richard Schwartz <richas@idt.net>
• ATM Celestron C8
  • From: Rick Grubbs <digital2@bellsouth.net>
• ATM anyone have left over carbon fiber/epoxy?
  • From: Rick Nelson <richard@netexp.net>
• Re: ATM Orion shaft encoders
  • From: Rick Nelson <richard@netexp.net>
• ATM Binocular Chairs
  • From: Rob Castle <rcastle@erols.com>
• ATM Binocular Observing Chairs,etc.
  • From: Rob Castle <rcastle@erols.com>
• ATM Binocular Dew Caps
  • From: Rob Castle <rcastle@erols.com>
• ATM Unit power finder info
  • From: Rob Castle <rcastle@erols.com>
• Re: ATM Has the silicon adhesive dried?
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM cheap and easy Lyot test
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Tools
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: Re : ATM Prime focus
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM where to get ronchi diffraction grating
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM WTB: binocular eye cups.
  • From: Robert Beer <r-beer@onu.edu>
• ATM Scope Help/ Advice
  • From: Rod Beverley <excelad@aeroinc.net>
• ATM another question
  • From: Rod Beverley <excelad@aeroinc.net>
• ATM Re: Tube Lining material
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• Re: ATM Source of inexpensive laser diodes
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• Re: ATM Televue eyepiece data
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• ATM My bent rock
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• Re: ATM Marble for mirrors?
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• Re: ATM Newbie Polishing Question
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• Re: ATM Truss telescopes
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• ATM Focuser Location
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• Re: ATM Coating places and "Ebony Star"
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• Re: ATM Observing Chair?
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• Re: ATM references on collimating binoculars
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• ATM Yolo News
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM Beginners questions
  • From: Ross_Dawson@county.com.au
• Re: ATM, Mirror kits and...
  • From: Ross_Dawson@county.com.au
• Re: ATM, Mirror kits and...
  • From: Ross_Dawson@county.com.au
• Beginners View (was Re: ATM, Mirror kits and...)
  • From: Ross_Dawson@county.com.au
• ATM More on beginners view
  • From: Ross_Dawson@county.com.au
• ATM Long Focus Mirror
  • From: RRedden506@aol.com
• ATM Long Focus Mirror
  • From: RRedden506@aol.com
• Re: ATM Solar Schiefspiegler?
  • From: rsinnott@skypub.com
• ATM: Backpack scopes
  • From: rudy@cae.ca (Rudy Taraschi)
• Re: ATM Unit power finder info
  • From: rudy@cae.ca (Rudy Taraschi)
• ATM Choice of Mirror Kits
  • From: "Salvatore J. Familia" <sfamilia@nassau.cv.net>
• Re: ATM PEC analysis
  • From: sb635@delphi.com
• Re: ATM Re: re : 1/60th wave
  • From: sb635@delphi.com
• RE: ATM Finder adjustment screws
  • From: Scott Berfield <berfield@pacbell.net>
• ATM waineo sytle grinding machine
  • From: Scott Marsh <smarsh@mail.geocities.com>
• ATM grinding/polishing machine. Need help!!!
  • From: Scott Marsh <smarsh@mail.geocities.com>
• ATM where to get ronchi diffraction grating
  • From: Scott Marsh <smarsh@mail.geocities.com>
• Re: ATM Interferometry at Stellafane, and elsewhere
  • From: Scott Milligan <wavedude@tiac.com>
• Re: ATM focuser placement
  • From: srychnov@uci.edu (Scott Rychnovsky)
• ATM Transverse Aberration or Wavefront Error?
  • From: Scott Rychnovsky <srychnov@uci.edu>
• Re: ATM unusual chinks appear in fine grinding
  • From: Scott Rychnovsky <srychnov@uci.edu>
• ATM Regrinding
  • From: Scott Rychnovsky <srychnov@uci.edu>
• Re: ATM Re: Mounting Finders
  • From: Scott Rychnovsky <srychnov@uci.edu>
• Re: ATM enhanced coating
  • From: peste@micronet.it (Stefano Pesci)
• Re: ATM European Resource list
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM pitch spilled in fabric
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM pitch spilled in fabric
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Starting out & Plaster Tools
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Stepper-motor circuit
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM About the circuit board
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Beginners questions
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Prime focus
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: Beginners View (was Re: ATM, Mirror kits and...)
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM buying the secondary
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Newbie Polishing Question
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Foucault tests
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Hello All
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• ATM Remove
  • From: Stephen Tuell <webmaster@imagine-hawaii.com>
• Re: ATM Source of small lenses
  • From: Steve <steves@ro.com>
• Re: first ATM project
  • From: Steve Bell <sb635@delphi.com>
• Re: first ATM project
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Laser collimator - hole size
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM re : A long post ... (and even longer heading)
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Good News, Bad News
  • From: Steve Bell <sb635@delphi.com>
• ATM Foucault tests
  • From: "stewart" <daniel@gateway.surfcity.nb.ca>
• ATM Magnification?
  • From: SUBURBANGY@aol.com
• ATM Magnification
  • From: SUBURBANGY@aol.com
• ATM re: eq mount for beginners
  • From: SUBURBANGY@aol.com
• ATM Pedestal Mount
  • From: SUBURBANGY@aol.com
• ATM cassegrain
  • From: SUBURBANGY@aol.com
• RE: ATM Has the silicon adhesive dried?
  • From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
• ATM Solar Schiefspiegler?
  • From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
• ATM RE: Solar Scheifspiegler?
  • From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
• ATM Re: Mounting Finders
  • From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
• Re: ATM Astrofest
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [RRedden506@aol.com]]
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• ATM spectrohelioscope (was bounced ...)
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM 1" OD thin wall ALUMINUM TUBING
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• ATM end-grain balsa wood?
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Balsa Wood w/important atm link
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Unit power finder info
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Unit power finder info
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Edmund's Flocking Paper (was ATM Unit power finder info)
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Edmund's Flocking Paper (was ATM Unit power finder info)
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Unit power finder info
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• ATM Barlow extensions
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: first ATM project-buy or grind
  • From: tmasnyk@surgery.bsd.uchicago.edu (Taras Masnyk)
• Re: ATM Coating places and "Ebony Star"
  • From: tmasnyk@surgery.bsd.uchicago.edu (Taras Masnyk)
• ATM unusual chinks appear in fine grinding
  • From: Ted Dobosz <edobosz@tig.com.au>
• Re: ATM Eyepiece and barlow combinations
  • From: tg@utstat.toronto.edu
• ATM collimation & first star test
  • From: thomrob@iamerica.net
• ATM FAQ updated
  • From: Tim Poulsen <Tim_Poulsen@zd.com>
• Re: ATM, Mirror kits and...
  • From: Tim Poulsen <Tim_Poulsen@zd.com>
• Re: RE: ATM RE: Beginner's View
  • From: Tim Poulsen <Tim_Poulsen@zd.com>
• Re: ATM Fixing a Celestron Starhopper
  • From: "Todd Caldwell" <tcaldwell@DataBeam.com>
• ATM pinhole
  • From: tom <tkleinw1@ix.netcom.com>
• ATM Tools
  • From: Tom Alexander <toma@apk.net>
• Re: ATM bearing size - fork mounts
  • From: Tom Coan <tcoan@teleport.com>
• Re: ATM focuser placement
  • From: Tom Coan <tcoan@teleport.com>
• Re: ATM Thermal effects and a question
  • From: Tom Coan <tcoan@teleport.com>
• Re: ATM Hello All
  • From: Tom Coan <tcoan@teleport.com>
• ATM Starting out & Plaster Tools
  • From: Tom Hayko <tjhayko@interlog.com>
• Re: ATM defect effects
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM collimation & first star test
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Making non-illuminated crosshairs illuminated
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Re: Metal Washer Tools
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: Secondary Holders (was Re: ATM: Modifying a Meade 12.5
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Metal Washer Tools (Still More Questions)
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM machined mirror
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Six inch f/3.75 astrograph - first light!
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Collimating question
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Source of small lenses
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Spherical aberration corrector for SCT's - A rough design
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Calculation of Prime Focus.
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Laser collimator - hole size
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Binocular Chairs
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Laser collimator - hole size
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Field flattness with a 4x5 camera on a C-14
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Field flattness with a 4x5 camera on a C-14
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Source of inexpensive laser diodes
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM: Coma corrector for large fields
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Orion shaft encoders
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Finder adjustment screws
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Binocular Dew Caps
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Plywood "primer"
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM RE: Beginner's View
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Truss telescopes
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Diagonal offset
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• Re: first ATM project
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• Re: ATM Where do I grind a mirror?
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• Re: ATM precision of secondary mirrors
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• Re: ATM Calculation of Prime Focus.
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• ATM Optical glass suppliers
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• ATM Glass Catalogues.
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• ATM Prime focus
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• Re: ATM Prime focus
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• Re: ATM Info on plate glass.... what is it actually ??
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• Re: ATM Marble for mirrors?
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• Re: ATM Newbie Polishing Question
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• ATM Glass
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• Re: ATM Hello All
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• Re: ATM fully illuminated
  • From: "Tom Mchugh" <tbmchugh@ainop.com>
• Re: ATM Metal Washer Tools
  • From: Tom.Stock@gensig.com
• Re: ATM Where do I grind a mirror?
  • From: Tom.Stock@gensig.com
• Re: ATM unusual chinks appear in fine grinding
  • From: Tom.Stock@gensig.com
• ATM Machine Grinding/Polishing Questions
  • From: Tom.Stock@gensig.com
• Re: ATM New photos on web page
  • From: tpuckett <tpuckett@mindspring.com>
• ATM Metal Washer Tools (Still More Questions)
  • From: UC007@aol.com
• Re: ATM Choice of Mirror Kits
  • From: UC007@aol.com
• Re: ATM another question
  • From: UC007@aol.com
• Re: ATM another question
  • From: UC007@aol.com
• Re: ATM Newbie Polishing Question
  • From: UC007@aol.com
• Re: ATM RE: Beginner's View
  • From: UC007@aol.com
• Re: ATM re : A long post ... (and even longer heading)
  • From: UC007@aol.com
• Re: ATM re : A long post ...
  • From: UC007@aol.com
• Re: ATM Thermal effects and a question
  • From: UC007@aol.com
• Re: ATM Thermal effects and a question
  • From: UC007@aol.com
• Re: ATM Schiefspiegler
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM pitch spilled in fabric
  • From: VirgilAJ@aol.com
• ATM Re: Hartmann Test
  • From: VirgilAJ@aol.com