Amateur Telescope Makers (ATM) Archive for SEP96 - by author

• Thread Index

• Re: ATM Re:Interpretation of Star Test
  • From: "Alan Levin" <ailevin@ix.netcom.com>
• ATM Dob drivers, etc
  • From: Alan Salmon <asalmon@mat.army.defence.gov.au>
• RE: ATM Question about mounts and astrophotography?
  • From: Alan Salmon <asalmon@mat.army.defence.gov.au>
• Re: ATM Amateur Space Telescope, (AST)
  • From: akelly@ghgcorp.com (Albert F. Kelly)
• Re: ATM CCD's and mirror F/#
  • From: akelly@ghgcorp.com (Albert F. Kelly)
• Re: ATM CCD's and mirror F/#
  • From: akelly@ghgcorp.com (Albert F. Kelly)
• Re: ATM Focal Length of first mirror
  • From: akelly@ghgcorp.com (Albert F. Kelly)
• Re: ATM Diagonal Mounting Procedure.
  • From: akelly@ghgcorp.com (Albert F. Kelly)
• ATM Beginner's Questions
  • From: chana@andr.UB.com (Allen Chan)
• ATM Archives updated for August 1996
  • From: Andy Steere <andy@www.system.missouri.edu>
• Re: ATM Amateur Space Telescope, (AST)
  • From: andydtg@alpha1.phoenix.net
• Re: ATM Opinions on Maximum Magnification vs: Seeing ?
  • From: andydtg@alpha1.phoenix.net
• Re: ATM Baking Bread
  • From: andydtg@alpha1.phoenix.net
• Re: ATM ALT/AZ
  • From: andydtg@alpha1.phoenix.net
• Re: ATM Teflon etching question
  • From: andydtg@alpha1.phoenix.net
• Re: ATM 6" f/4 or not?
  • From: andydtg@alpha1.phoenix.net
• Re: ATM Toy wheels for dob bearings
  • From: andydtg@alpha1.phoenix.net
• Re: ATM Mylar windows
  • From: andydtg@alpha1.phoenix.net
• Re: Re[2]: ATM Mylar windows
  • From: andydtg@alpha1.phoenix.net
• Re: ATM Microscopes as Eyepieces
  • From: andydtg@alpha1.phoenix.net
• Re: ATM Threads on Lumicon Filters and Televue Eyepieces
  • From: andydtg@alpha1.phoenix.net
• Re: ATM Removing coating.
  • From: andydtg@alpha1.phoenix.net
• Re: ATM foucult tester (better living t
  • From: andydtg@alpha1.phoenix.net
• Re: ATM Eyepiece Focus
  • From: andydtg@alpha1.phoenix.net
• Re: ATM Experience in solar filter for amateurs
  • From: andydtg@alpha1.phoenix.net
• ATM Food for Thought (was Baking Bread)
  • From: andyman@tiac.net (andyman)
• ATM Re: Help figuring Cassegrain mirror...
  • From: archer@meer.net (Archer Sully)
• ATM 500 grit done, what next ??
  • From: arning@itn.is (Arni Ingimundarson)
• ATM Problem polishing!!
  • From: arning@itn.is (Arni Ingimundarson)
• ATM Still problem polishing !!
  • From: arning@itn.is (Arni Ingimundarson)
• ATM Pronunciation
  • From: Atmj1@aol.com
• ATM Re: Pronunciation
  • From: Atmj1@aol.com
• ATM Gear reducer
  • From: behambu@ibm.net (Berthold Hamburger)
• ATM homepage update
  • From: behambu@ibm.net (Berthold Hamburger)
• Re: ATM Anyone sell Foucault
  • From: behambu@ibm.net (Berthold Hamburger)
• ATM Cutting circular woodpieces
  • From: behambu@ibm.net (Berthold Hamburger)
• ATM Woodworking compatible with mirror-making?
  • From: wmcclain@salamander.com (Bill McClain)
• ATM re: Interferometric Testing?
  • From: wmcclain@salamander.com (Bill McClain)
• ATM Tile tool on 8" blank
  • From: Bill Prewitt <bprewitt@newreach.net>
• ATM Tile tool on 8" blank
  • From: Bill Prewitt <bprewitt@newreach.net>
• ATM Upgrading the drive system on a Tele Vue Systems mount
  • From: "Bill Tschumy" <bill@otherwise.com>
• ATM Re: atm-digest V1 #346
  • From: Bob Lombardi <blombard@iu.net>
• ATM: 1st time Parabolizing Nightmare.
  • From: Brand <huntb@ucs.orst.edu>
• Re: ATM: 1st time Parabolizing Nightmare.
  • From: Brand <huntb@ucs.orst.edu>
• Re: Re[2]: ATM 10in. Mirror--Star Test ?'s
  • From: Brand <huntb@ucs.orst.edu>
• Re: Re[2]: ATM 10in. Mirror--Star Test ?'s
  • From: Brand <huntb@ucs.orst.edu>
• Re: Intermediate ATM project
  • From: Brand <huntb@ucs.orst.edu>
• Re: Intermediate ATM project [book ?'s]
  • From: Brand <huntb@ucs.orst.edu>
• Re: ATM Aluminum telescope Tubes
  • From: Brand <huntb@ucs.orst.edu>
• Re: ATM Ritchey-Chretien
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Focus questions for my 4.25" f/10 Newtonian
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• ATM Re: short f# spheres
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Ritchey-Chretien
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Alika K. Herring
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• ATM Re : First Mirror
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• ATM Re: R-C cass design.
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: Intermediate ATM project
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: Intermediate ATM project
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: Fw: ATM Digital Setting Circles?
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Optical standards
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• ATM tricks from the kitchen (and loundry)
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Super Polaris Mount
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Anodizing
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM TM Mag on CD?
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Baking Bread
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM TM Magazine and Kalmbach Publishing
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM OK to put price quotes on list?
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Removing coating.
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Diagonal quality
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Experience in solar filter for amateurs
  • From: Brian Nestel <blast@aloha.net>
• ATM
  • From: Bryan Greer <74503.3164@compuserve.com>
• ATM Chemical Silvering Questions ? -Reply
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• ATM Plaster Tools...
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• Re: ATM Amateur Space Telescope, (AST)
  • From: "Chris Tant" <ctant1@ford.com>
• Re: ATM Amateur Space Telescope, (AST)
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Amateur Space Telescope, (AST)
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Cookbook CCD 245 electronic parts
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Black Flock Paper vs: Fine Black Velvet
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• ATM Fw: Hurst steppers and Dob Driver II
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Interferometric Testing?
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Re: Chretien
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Pronounciation help
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Threads on Lumicon Filters and Tele
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Common sources for oxalic acid
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• ATM The Sky (& Telescopes)
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• ATM Tom Clark's AA e-mail address
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: Fw: ATM Digital Setting Circles? OOPS!
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM Nothing but heat....
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM Clausing
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: New to ATM, need product suggestions
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM tricks from the kitchen (and loundry)
  • From: Chris Westlnad <westland@uxmail.ust.hk>
• ATM Re: >Can someone tell me where focus for any given eyepiece is located.
  • From: Chris Westlnad <westland@uxmail.ust.hk>
• ATM Removing coating.
  • From: ckaine@one.net (Christopher Kaine)
• ATM circle cutting jig
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Cookbook CCD 245 electronic parts
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• Re: ATM Friction in a mount made from pipes
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• Re: ATM Dew Cap/Paint Flaking
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• Re: ATM TM Magazine and Kalmbach Publishing
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• Re: ATM Question about mounts and astrophotography?
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• Re: ATM Painting Diagonal Mirror Edges Black
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• Re: ATM Black Flock Paper vs: Fine Black Velvet
  • From: clement@cqt.com
• Re: ATM Teflon etching question
  • From: clement@cqt.com
• Re: ATM Mylar windows
  • From: clement@cqt.com
• ATM Re: Teflon
  • From: clement@cqt.com
• ATM First Mirror
  • From: Cooper <scooper@robles.callutheran.edu>
• Re: ATM Super Polaris Mount
  • From: Cooper <scooper@robles.callutheran.edu>
• ATM which book next?
  • From: craig_kerr@odp.tamu.edu
• Re: ATM Anyone sell Foucault testers?
  • From: craig_kerr@odp.tamu.edu
• ATM Diagonal quality
  • From: craig_kerr@odp.tamu.edu
• ATM sites of interest around San Jose, CA
  • From: craig_kerr@odp.tamu.edu
• ATM Z1,Z2 & Z3 ERRORS
  • From: Dan Gray <grayarea@teleport.com>
• ATM alt/az to ra/dec
  • From: Dan Gray <grayarea@teleport.com>
• Re: ATM Cutting circular woodpieces
  • From: Dan Gray <grayarea@teleport.com>
• ATM Dave's loss
  • From: kc5gxl@juno.com (Dan Harriman)
• Re: ATM another stuck tool idea
  • From: Daniel Walker <dwalker@SUL-ROSS-1.SULROSS.EDU>
• ATM Grinding Tool
  • From: Daniel Walker <dwalker@SUL-ROSS-1.SULROSS.EDU>
• Re: ATM First plaster and tile tool
  • From: Dave McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Mirror Figure
  • From: Dave McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM another stuck tool idea
  • From: Dave McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Blank & tool mating patterns
  • From: Dave McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Best way to manipulate small blank?
  • From: Dave McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM 500 grit done, what next ??
  • From: Dave McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM 500 grit done, what next ??
  • From: Dave McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Re: FRP board & slippery slugs
  • From: Dave McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM macs, atms and parallel ports
  • From: das@po.cwru.edu (Dave Sopchak)
• Re: ATM 6in. F/10
  • From: das@po.cwru.edu (Dave Sopchak)
• Re: ATM Opinions on Maximum Magnification vs: Seeing ?
  • From: das@po.cwru.edu (Dave Sopchak)
• Re:ATM Life of sorrow
  • From: das@po.cwru.edu (Dave Sopchak)
• Re: ATM Eyepieces for first scope
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Removing coating.
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Removing coating.
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Removing coating.
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Removing coating.
  • From: Dave Trahan <strahan@umd5.umd.edu>
• RE: ATM 1" Thick glass is cheaper in several squares
  • From: Daves2etx@aol.com
• Re: ATM Quality And Magnification
  • From: "David B. Toth" <ve3gyq@amsat.org>
• Re: ATM Optical standards
  • From: "David B. Toth" <ve3gyq@amsat.org>
• Re: ATM Removing coating.
  • From: "David B. Toth" <ve3gyq@amsat.org>
• Re: ATM The Sky (& Telescopes)
  • From: "David B. Toth" <ve3gyq@amsat.org>
• Re: ATM Flocked paper
  • From: David Boll <dboll@hp-vcd.vcd.hp.com>
• Re: ATM Stalk spider construction and use?
  • From: David Boll <dboll@hp-vcd.vcd.hp.com>
• Re: ATM 6in. F/10
  • From: David Boll <dboll@hp-vcd.vcd.hp.com>
• ATM Flocked paper
  • From: David Groski <groski@esvax.dnet.dupont.com>
• ATM Silvering
  • From: David Groski <groski@esvax.dnet.dupont.com>
• RE: ATM Massive indecision!
  • From: David Groski <groski@esvax.dnet.dupont.com>
• ATM Removing old coatings
  • From: David Groski <groski@esvax.dnet.dupont.com>
• ATM Mirror Figure
  • From: "David Sayah" <dsayah@ucla.edu>
• ATM Secondary Size
  • From: "David Sayah" <dsayah@ucla.edu>
• ATM Figuring
  • From: "David Sayah" <dsayah@ucla.edu>
• Re: ATM Figuring
  • From: "David Sayah" <dsayah@ucla.edu>
• ATM First Mirror Figuring
  • From: "David Sayah" <dsayah@ucla.edu>
• ATM scope parts
  • From: "David Sayah" <dsayah@ucla.edu>
• ATM Eyepieces for first scope
  • From: "David Sayah" <dsayah@ucla.edu>
• ATM Focal Length of first mirror
  • From: "David Sayah" <dsayah@ucla.edu>
• Re: ATM Painting Diagonal Mirror Edges Black
  • From: DCBly@aol.com
• ATM Amateur Space Telescope, (AST)
  • From: ketelsen@as.arizona.edu (Dean Ketelsen)
• ATM spinning glass
  • From: ketelsen@as.arizona.edu (Dean Ketelsen)
• ATM spinning glass
  • From: ketelsen@as.arizona.edu (Dean Ketelsen)
• ATM Interferometric Testing?
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM RE: Aluminum Mirror Project
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Anyone sell Foucault testers?
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Number for Edmund Sci?
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Bracket for Micrometer on Foucault Tester?
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Eyepiece Focus
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Focal Length of first mirror
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Woodworking compatib
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM TM Magazine Re-prin
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM turned edge
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM Massive indecision!
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM Anyone sell Foucault
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM Cutting circular woo
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM Largest Mirror on Waineo Machine?
  • From: Doug Mouser <mouser@s2.sonnet.com>
• Re: ATM Largest Mirror on Waineo Machine?
  • From: Doug Mouser <mouser@s2.sonnet.com>
• ATM Mirror Kits
  • From: "Douglas Arion, Prof. Physics" <ariond1@carthage.edu>
• ATM Dropped mirror
  • From: foreilly@domeidea.com
• ATM First Mirror, First Problem
  • From: "Francis Joe Fitzgibbon" <fjfitzgibbon@lanl.gov>
• ATM Hello again
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM Pitch laps on plater tools.
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM Mounts
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Anyone sell Foucault testers?
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM Re: fraser and his pitch lap
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM Having to do with micrometers, slow motions and stuff for foucault , testers.
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: Re[6]: ATM 1" thick glass at $450 for 13" plate!?
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Using a used tool to grind a new mirror
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Eclipse
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM Pitch Laps (there is aquestion at the end)
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM TM Magazine Re-prints?
  • From: "Gary Seronik" <gseronik@direct.ca>
• Re: ATM 6" f/4 or not?
  • From: "Gary Seronik" <gseronik@direct.ca>
• Re: ATM The Origin of Ebony Star Bearings
  • From: "Gary Seronik" <gseronik@direct.ca>
• Re: ATM Re: FRP board
  • From: "Gary Seronik" <gseronik@direct.ca>
• Re: ATM Anyone sell Foucault testers?
  • From: "Gary Seronik" <gseronik@direct.ca>
• Re: Re[2]: ATM Anyone sell Foucault testers?
  • From: "Gary Seronik" <gseronik@direct.ca>
• Re: ATM sites of interest around San Jose, CA
  • From: gwoods@albany.net (Gary Woods)
• ATM 9 and 18 point floatation cell design
  • From: "Geoff Dudley" <GDudley@swin.edu.au>
• Re: ATM First plaster and tile tool
  • From: Gstacy@gnn.com (Gil Stacy)
• Re: ATM 1st mirror goal - overcorrected
  • From: Gstacy@gnn.com (Gil Stacy)
• Re: ATM tricks from the kitchen (and loundry)
  • From: Gstacy@gnn.com (Gil Stacy)
• Re: ATM Star Testing
  • From: glenng@analogy.com (Glenn Graham)
• Re: ATM Mercury spun mirrors -was exch rate
  • From: Gord Seifert <gseifert@uniserve.com>
• Re: ATM What IS a Beral coating anyhow?
  • From: Gord Seifert <gseifert@uniserve.com>
• Re: ATM answering: "What is beral, anyway?"
  • From: Gord Seifert <gseifert@uniserve.com>
• Re: ATM answering: "What is beral, anyway?"
  • From: Gord Seifert <gseifert@uniserve.com>
• ATM How much heat?
  • From: Greg Granville <greg@laser.arl.psu.edu>
• Re: ATM How much heat?
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM dew remover power
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM RE: Nothing but heat....
  • From: Greg Granville <greg@laser.arl.psu.edu>
• RE: ATM Clausing
  • From: Greg Granville <greg@laser.arl.psu.edu>
• RE: ATM Nothing but heat
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM Circuit boards, Guide, Mels scope drive
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM Newport Glass
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM U.O. spiders, secondary holders
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM Diagonal edge blackening...
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM Digital Setting Circles?
  • From: lyzenga@THUBAN.AC.HMC.EDU (Greg Lyzenga)
• Re: ATM Digital Setting Circles?
  • From: lyzenga@THUBAN.AC.HMC.EDU (Greg Lyzenga)
• No Subject
  • From: Gregory Edwards <edwards@crl.com>
• Re: ATM: 1st time Parabolizing Nightmare.
  • From: "Henry T. Van Gemert" <hvangeme@edcen.ehhs.cmich.edu>
• ATM Pronounciation help
  • From: "Henry T. Van Gemert" <hvangeme@edcen.ehhs.cmich.edu>
• ATM University/Spiders
  • From: Herminio Perez <74710.3115@compuserve.com>
• ATM Chemical Silvering Questions ?
  • From: "Howard L. Clausing" <hclaus@clausing.com>
• RE: ATM Clausing
  • From: "Howard L. Clausing" <hclaus@clausing.com>
• Re: ATM Clausing
  • From: "Howard L. Clausing" <hclaus@clausing.com>
• Re: ATM Clausing
  • From: "Howard L. Clausing" <hclaus@clausing.com>
• Re: ATM answering: "What is beral, anyway?"
  • From: "Howard L. Clausing" <hclaus@clausing.com>
• ATM Grooved Tools
  • From: Jack Schmidling <arf@mc.net>
• ATM Aluminum Mirror Project
  • From: Jack Schmidling <arf@mc.net>
• ATM Microscopes as Eyepieces
  • From: Jack Schmidling <arf@mc.net>
• ATM Aluminum Dew
  • From: Jack Schmidling <arf@mc.net>
• ATM Mirror Weight.
  • From: jklutts@up.net (James A. Klutts)
• ATM Plywood Thickness.
  • From: jklutts@up.net (James A. Klutts)
• ATM Prices/Mirror Coatings.
  • From: jklutts@up.net (James A. Klutts)
• ATM 10in. Mirror
  • From: jklutts@up.net (James A. Klutts)
• ATM Focusers
  • From: jklutts@up.net (James A. Klutts)
• ATM 6in. F/10
  • From: jklutts@up.net (James A. Klutts)
• ATM Massive indecision!
  • From: jklutts@up.net (James A. Klutts)
• ATM ALT/AZ
  • From: jklutts@up.net (James A. Klutts)
• ATM Mirror for sale?
  • From: jklutts@up.net (James A. Klutts)
• ATM University/Spiders
  • From: jklutts@up.net (James A. Klutts)
• ATM Eclipse
  • From: jklutts@up.net (James A. Klutts)
• ATM Diagonal Mounting Procedure.
  • From: jklutts@up.net (James A. Klutts)
• ATM Aluminum telescope Tubes
  • From: "James F. Heilman" <heilman@netside.com>
• ATM: wrinkle paint
  • From: James Krushlucki <jkrushl@unibase.Unibase.COM>
• Re: ATM 500 grit done, what next ??
  • From: James Lamb <100751.2742@compuserve.com>
• Re: ATM Ritchey-Chretien
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Star Testing
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM alt/az to ra/dec
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM First Mirror
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM Removing coating.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Focal Length of first mirror
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Interactive Ray Trace Pgm
  • From: "Jan R. Sugalski" <afn19866@afn.org>
• Re: ATM Moon Seeing vs: Other Objects
  • From: fieldsey@noao.edu (Jason Fields)
• ATM Reply to hi magnification on moon & planets...
  • From: fieldsey@noao.edu (Jason Fields)
• ATM Re: Chretien
  • From: fieldsey@noao.edu (Jason Fields)
• Re: ATM Threads on Lumicon Filters and Televue Eyepieces
  • From: fieldsey@noao.edu (Jason Fields)
• Re: ATM Threads on Lumicon Filters and Televue Eyepieces
  • From: fieldsey@noao.edu (Jason Fields)
• Re: ATM Mounts
  • From: fieldsey@noao.edu (Jason Fields)
• ATM How high the hill
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• Re: ATM How high the hill
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• Re: ATM Life of sorrow.
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• Re: ATM Quality Of Silver Films
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• Re: ATM Re: Chretien
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• Re: ATM Largest Mirror on Waineo Machine?
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• ATM Waineo null test, first impression
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• Re: ATM Re: Chretien
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• Re: ATM Re: Chretien
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• Re: ATM Re: Chretien
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• ATM Waineo null test
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• ATM Eyepiece Focus
  • From: Jerry Mulchin <jmulchin@Cisco.COM>
• Re: ATM Eyepiece Focus
  • From: Jerry Mulchin <jmulchin@Cisco.COM>
• ATM Clausing
  • From: jf <jf@arn.net>
• ATM some questions of a new member
  • From: JHM.van.Gastel@psy.vu.nl
• ATM silicone adhesive
  • From: JHM.van.Gastel@psy.vu.nl
• Re: ATM Focusers
  • From: jfly@hiwaay.net (Jim Fly)
• Re: ATM Circuit boards, Guide, Mels scope drive
  • From: Jim Lawrence <lawrence@kadets.d20.co.edu>
• Re: ATM first mirror
  • From: "Jim Mason" <jmason@up.net>
• ATM foucult tester (better living thru chemistry/smooth threads)
  • From: "Jim Mason" <jmason@up.net>
• ATM first mirror
  • From: Jim Mason <jmason@up.net>
• Re: ATM CCD's and mirror F/#
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: ATM Mirror Weight.
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: ATM CCD's and mirror F/#
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: ATM 10in. Mirror
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: Re[2]: ATM 10in. Mirror
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: ATM Ritchey-Chretien
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: Re[2]: ATM 10in. Mirror--Star Test ?'s
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: ATM interpretation of star test
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: ATM interpretation of star test
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: Fw: ATM Digital Setting Circles?
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: ATM First Mirror, First Problem
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: ATM Eyepieces for first scope
  • From: "John A. Volk" <103037.3107@compuserve.com>
• ATM Newport Glass
  • From: jaanders@europa.com (John Albert Anderson)
• Re: ATM Newport Glass
  • From: John Anderson <jaanders@europa.com>
• Re: ATM RFT wrinkles
  • From: John C Delacy <johndel@mdhost.cse.TEK.COM>
• New to ATM, need product suggestions
  • From: "John Lewis (Volt Comp)" <a-johlew@microsoft.com>
• ATM Experience in solar filter for amateurs
  • From: Jose Amaury Pereira <jamaury@elogica.com.br>
• ATM Amatuer Space Telescope
  • From: "jsimpson" <jsimpson@cais.cais.com>
• ATM Threads on Lumicon Filters and Televue Eyepieces
  • From: "jsimpson" <jsimpson@cais.cais.com>
• ATM Thanks for info on Lumicon threads
  • From: "jsimpson" <jsimpson@cais.cais.com>
• Re: ATM TM Magazine Re-prints?
  • From: K1JJ@aol.com
• ATM Black Flock Paper vs: Fine Black Velvet
  • From: K1JJ@aol.com
• Re: ATM Flocked paper
  • From: K1JJ@aol.com
• ATM Opinions on Maximum Magnification vs: Seeing ?
  • From: K1JJ@aol.com
• Re: ATM Quality And Magnification
  • From: K1JJ@aol.com
• ATM Moon Seeing vs: Other Objects
  • From: K1JJ@aol.com
• Re: ATM Why The Moon Looks So Good!
  • From: K1JJ@aol.com
• ATM Dew Prevention Experience?
  • From: K1JJ@aol.com
• ATM Dall-Kirkham Scope
  • From: K1JJ@aol.com
• Re: ATM How much heat?
  • From: K1JJ@aol.com
• Re: ATM Clausing
  • From: K1JJ@aol.com
• ATM TheSky Bug Solved
  • From: K1JJ@aol.com
• ATM What IS a Beral coating anyhow?
  • From: K1JJ@aol.com
• Re: ATM Threads on Lumicon Filters and Televue Eyepieces
  • From: K1JJ@aol.com
• Re: ATM homepage update
  • From: K1JJ@aol.com
• Re: ATM OK to put price quotes on list?
  • From: K1JJ@aol.com
• ATM A Sag Molded 65 Inch Spherical Mirror Blank Available - Cheap!
  • From: K1JJ@aol.com
• Re: ATM The Sky (& Telescopes)
  • From: K1JJ@aol.com
• ATM Mylar windows
  • From: kflor@rmi.net (Ken Florentino)
• Re: ATM Mylar windows
  • From: kflor@rmi.net (Ken Florentino)
• Re: ATM Experience in solar filter for amateurs
  • From: kflor@rmi.net (Ken Florentino)
• Re: ATM First plaster and tile tool
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Re : First Mirror
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Optical standards
  • From: Ken Lowther <s0109366@CC.YSU.EDU>
• Re: ATM First Mirror, First Problem
  • From: Ken Lowther <s0109366@CC.YSU.EDU>
• Re: ATM Nothing but heat....
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Mylar windows
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• ATM parr correctors
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM plaster, etc.
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM First plaster and tile tool
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• ATM another stuck tool idea
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM another stuck tool idea
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Anodizing
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Stalk spider construction and use?
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM turned edge
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Focus questions for my 4.25" f/10 Newtonian
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Focus questions for my 4.25" f/10 Newtonian
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• ATM Life of sorrow.
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Hey! Has anyone made a biscut cutter?
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: Intermediate ATM project?
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Teflon etching question
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• ATM Height of turbulance(was Star Testing)
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM 1" thick glass at $450 for 13" plate!?
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: Re[2]: ATM 1" thick glass at $450 for 13" plate!?
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: Intermediate ATM project
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM 6" f/4 or not?
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Re: Chretien
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM 500 grit done, what next ??
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM IRT
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: Re[2]: ATM Mylar windows
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Plaster Tools...
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM foucult tester (better living thru chemistry/smooth threads)
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Cutting circular woodpieces
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM RFT wrinkles
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• RE: ATM 6in F/10
  • From: Klaus Peter Schroder <schroder@ast.cam.ac.uk>
• ATM Digest version available?
  • From: kodama@alpha.nb.rockwell.com
• ATM digest and archives
  • From: kodama@alpha.nb.rockwell.com
• RE: Help (ATM digest)
  • From: kodama@alpha.nb.rockwell.com
• ATM Anodizing
  • From: Kreig McBride <kmcbride@az.com>
• Re: ATM CCD's and mirror F/#
  • From: Kurt Hillig <khillig@Chem.LSA.umich.edu>
• Re: ATM Mirror Weight.
  • From: Kurt Hillig <khillig@Chem.LSA.umich.edu>
• Re: ATM Anodizing
  • From: Kurt Hillig <khillig@Chem.LSA.umich.edu>
• Re: ATM Teflon etching question
  • From: Kurt Hillig <khillig@Chem.LSA.umich.edu>
• Re: ATM Largest Mirror on Waineo Machin
  • From: Kurt Hillig <khillig@Chem.LSA.umich.edu>
• Re: ATM Pronunciation
  • From: Kurt Hillig <khillig@Chem.LSA.umich.edu>
• Re: ATM Re: Pronunciation
  • From: Kurt Hillig <khillig@Chem.LSA.umich.edu>
• ATM Focussing on the upper atmosphere [?]
  • From: Larry Manuel <lmanuel@agt.net>
• ATM Dew Prevention Experience
  • From: Larry Manuel <lmanuel@agt.net>
• ATM Making a Maksutov scope
  • From: Larry Manuel <lmanuel@agt.net>
• ATM Making a Schupmann scope
  • From: Larry Manuel <lmanuel@agt.net>
• ATM objective mirror/lens dew elimination
  • From: Larry Manuel <lmanuel@agt.net>
• ATM Helium filled optical tubes
  • From: Larry Manuel <lmanuel@agt.net>
• ATM super paraboloids
  • From: Larry Manuel <lmanuel@agt.net>
• ATM Mylar windows
  • From: Larry Manuel <lmanuel@agt.net>
• ATM answering: "What is beral, anyway?"
  • From: Larry Manuel <lmanuel@agt.net>
• ATM a plea...to edit follow-up postings
  • From: Larry Manuel <lmanuel@agt.net>
• ATM rouge stains, pitch and turpentine
  • From: Larry Manuel <lmanuel@agt.net>
• ATM Aluminum Dew
  • From: Larry Manuel <lmanuel@agt.net>
• ATM squares of glass instead of tile; adhesives generally
  • From: Larry Manuel <lmanuel@agt.net>
• ATM 'Amateur Astronomy' magazine - not an ad!
  • From: Larry Manuel <lmanuel@agt.net>
• ATM primary mirror ahesives
  • From: Larry Manuel <lmanuel@agt.net>
• ATM Re: atm-digest V1 #323
  • From: Laurie Forbes <lforbes@nucleus.com>
• ATM Re: Spin cast mirrors
  • From: Laurie Forbes <lforbes@nucleus.com>
• Re: ATM Secondary Size
  • From: Len Lipton <llipton@erols.com>
• Re: ATM 10in. Mirror
  • From: Len Lipton <llipton@erols.com>
• ATM Best way to handle small blank
  • From: Len Lipton <llipton@erols.com>
• No Subject
  • From: Len Lipton <llipton@erols.com>
• ATM Flats, Videos, Spheres
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM AstroFest Mirror In A Day
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM AstroFest Mirror-In-A-Day-Two
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Edge Problems
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Grooved Tools
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Masking Edges On First Mirrors
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Paper Laps
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Alika K. Herring
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Quality And Magnification
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Big Mirrors = Light Buckets?
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Mirror Making: Why Bother?
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Quality Of Silver Films
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Why The Moon Looks So Good!
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Overcoating Silver
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Optical Standards/Quality
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Optical Standards/Quality II
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Death To Aluminum Coatings
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• ATM Silvering Videos & Flats
  • From: "M.E. Germann" <CCMEG@MIZZOU1.missouri.edu>
• Re: ATM Microscopes as Eyepieces
  • From: manfred.poland@erlangen.netsurf.de (Manfred Poland)
• ATM DANGER! Asteroids!
  • From: "Marian Drumea" <mdrumea@dial.roknet.ro>
• ATM Sorry
  • From: "Marian Drumea" <mdrumea@dial.roknet.ro>
• ATM Friction in a mount made from pipes
  • From: Mark Gilbert <mark.gilbert@pobox.com>
• ATM Re: atm-digest V1 #326
  • From: Mark Gilbert <mark.gilbert@pobox.com>
• ATM Focus questions for my 4.25" f/10 Newtonian
  • From: Mark Gilbert <mark.gilbert@pobox.com>
• Re: ATM Eclipse
  • From: Mark Slade <marks@interserf.net>
• Re: ATM 18-point cell design software
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Re: atm-digest V1 #323
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM: 1st time Parabolizing Nightmare.
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Polishing Problem
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Interferometric Testing?
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Interferometric Testing
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Ritchey-Chretien
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Focus questions for my 4.25" f/10 Newtonian
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Re: short f# spheres
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• ATM Teflon etching question
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Teflon etching question
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• ATM Teflon follow up
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM paraboloid woes
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Teflon etching question
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Newport Glass
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• ATM "Wrinkle" paint question
  • From: MartyJ337@aol.com
• ATM Dew Cap/Paint Flaking
  • From: MartyJ337@aol.com
• RE: ATM TM Magazine Re-prints?
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM Ritchey-Chretien
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM Dob dig. set. circles on split ring?
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM What IS a Beral coating anyhow?
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM Diagonal Mounting Procedure.
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM Newport Glass
  • From: Mathew Marulla <atm@tiac.net>
• Re: ATM Archives updated for August 1996
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: Pipe Thread Mounts]
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: Amateur Space Telescope]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Mirror Figure
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM First plaster and tile tool
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM I'm new at this
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Plywood Thickness.
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM: 1st time Parabolizing Nightmare.
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM 10in. Mirror
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Figuring
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM turned edge
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Figuring
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM turned edge
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Terry Churchill <tcdc@ozemail.com.au>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Z1,Z2 & Z3 ERRORS
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Figuring fast mirrors
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: Homepage update]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Figuring fast mirrors
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["Rodger Petersen" <Rodger_Petersen@msn.com>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Massive indecision!
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Lou Sanchez-Chopitea <lou.sanchez-chopitea@Xilinx.COM>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Focal length: How long is too long?
  • From: Mel Bartels <mbartels@efn.org>
• ATM atm project - cass?
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM 1st mirror goal - overcorrected
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Star Testing
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Waineo96 - buggy?
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: Making a Maksutov scope]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Optical standards
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Turned Down Edge and FEM
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Optical standards
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["Mark VandeWettering" <markv@tick>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Mylar windows
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["Alan Levin" <ailevin@ix10.ix.netcom.com>]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Admin request]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Circuit boards, Guide, Mels scope drive
  • From: Mel Bartels <mbartels@efn.org>
• ATM frictional forces
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM OK to put price quotes on list?
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Admin request]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Sub diameter Tools
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM pre-generated curve - what then
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM pre-generated curve - what then
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Sub diameter Tools
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM RFT wrinkles
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: ]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM some questions of a new member
  • From: Mel Bartels <mbartels@efn.org>
• Intermediate ATM project?
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: Intermediate ATM project
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: ATM Prices/Mirror Coatings.
  • From: mycall@rt66.com (Michael Pendley)
• ATM Thanks and my first tile/plaster tool.
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Amateur Space Telescope, (AST)
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Amateur Space Telescope, (AST)
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM More on Plaster for Tools
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Edge Problems
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Grinding Tool
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Ritchey-Chretien
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Nothing but heat....
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Helium filled optical tubes
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Threads on Lumicon Filters and Televue Eyepieces
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Removing coating.
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Re : First Mirror
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• ATM plaster, etc.
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM: 1st time Parabolizing Nightmare.
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Focusers
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Focus questions for my 4.25" f/10 Newtonian
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Focal length: How long is too long?
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Focal length: How long is too long?
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Teflon etching question
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Dall-Kirkham Scope
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Optical standards
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Removing coating.
  • From: spooner@page.az.net (Michael Spooner)
• Re: Re[6]: ATM 1" thick glass at $450 for 13" plate!?
  • From: spooner@page.az.net (Michael Spooner)
• ATM Beral Coatings
  • From: mycall@sandia.gov (Mike)
• Re: ATM Amateur Space Telescope, (AST)
  • From: Mike Marchand <marchanm@kent.net>
• Re: ATM Anodizing
  • From: Mike Marchand <marchanm@kent.net>
• Re: ATM First plaster and tile tool
  • From: Mike Marchand <marchanm@kent.net>
• Re: ATM Amateur Space Telescope, (AST)
  • From: Mike Marchand <marchanm@kent.net>
• Re: ATM silicone adhesive
  • From: Mike McKee <mckee@ix.netcom.com>
• Re: ATM Flocked paper - UK sources?
  • From: Neil Pegg <Neil.Pegg@src.bae.co.uk>
• Re: ATM TM Magazine Re-prints?
  • From: Neil Pegg <Neil.Pegg@src.bae.co.uk>
• Re: ATM 6" f/4 or not?
  • From: Neil Pegg <Neil.Pegg@src.bae.co.uk>
• ATM Plate glass available
  • From: optics@savenet.com (Optics)
• ATM need any help on French pronounciation ?
  • From: Payet Thierry <buddha@guetali.fr>
• Re: ATM First plaster and tile tool
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM Focus questions for my 4.25" f/10 Newtonian
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM Teflon etching question
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM Removing coating.
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM 18-point cell design
  • From: PFAFF2@delphi.com
• ATM Friction in a mount made from pipes
  • From: PFAFF2@delphi.com
• ATM more lurie
  • From: PFAFF2@delphi.com
• ATM plaster, etc.
  • From: PFAFF2@delphi.com
• Re: ATM First plaster and tile tool
  • From: PFAFF2@delphi.com
• ATM Polishing Problem
  • From: PFAFF2@delphi.com
• ATM MIL-G-174a
  • From: PFAFF2@delphi.com
• Re: ATM paraboloid woes
  • From: PFAFF2@delphi.com
• ATM Dall-Kirkham Scope
  • From: PFAFF2@delphi.com
• Re: Intermediate ATM project
  • From: PFAFF2@delphi.com
• Re: ATM Largest Mirror on Waineo Machin
  • From: PFAFF2@delphi.com
• Re: ATM Largest Mirror on Waineo Machin
  • From: PFAFF2@delphi.com
• Re: ATM Optical standards
  • From: PFAFF2@delphi.com
• ATM Interactive Ray Trace Pgm
  • From: PFAFF2@delphi.com
• ATM Threads on Lumicon Filters and Tele
  • From: PFAFF2@delphi.com
• ATM foucult tester (better living thru
  • From: PFAFF2@delphi.com
• Re: ATM Removing coating.
  • From: PFAFF2@delphi.com
• Re: ATM foucult tester (better living t
  • From: PFAFF2@delphi.com
• [SENT] ATM 1st mirror - machine use
  • From: PFAFF2@delphi.com
• Re: Re[6]: ATM 1" thick glass at $450 f
  • From: PFAFF2@delphi.com
• ATM [Fwd: BOUNCE atm@shore.net: Admin r
  • From: PFAFF2@delphi.com
• [SENT] ATM Focal Length of first mir
  • From: PFAFF2@delphi.com
• ATM Still problem polishing !!
  • From: PFAFF2@delphi.com
• ATM RFT wrinkles
  • From: PFAFF2@delphi.com
• Re: ATM RFT wrinkles
  • From: PFAFF2@delphi.com
• Re: ATM another stuck tool idea
  • From: Phil Owen <powen@lynx.dac.neu.edu>
• RE: ATM need any help on French pronounciation ?
  • From: Philippe & Geertrui Mollet-Cornelis <mollet.cornelis@ping.be>
• RE: ATM Two thumbs up for Silvering Video
  • From: Philippe & Geertrui Mollet-Cornelis <mollet.cornelis@ping.be>
• ATM TM Magazine Re-prints?
  • From: polaris@gsn.net
• ATM TM Magazine
  • From: polaris@gsn.net
• ATM TM Magazine
  • From: polaris@gsn.net
• ATM Knife Edge Tester
  • From: polaris@gsn.net
• ATM Sub diameter Tools
  • From: polaris@gsn.net
• ATM Blackening Diagonal Edges
  • From: polaris@gsn.net
• ATM Re:Interpretation of Star Test
  • From: psh@juno.com
• Re: ATM Star Testing
  • From: psh@juno.com
• ATM Re: Dew Prevention in Newtonians
  • From: psh@juno.com
• ATM DUMB QUESTION
  • From: Ralph McCrun <rmccrum@skyenet.net>
• Re: ATM TM Magazine Re-prints?
  • From: Ramiro Hernandez <rhernand@campus.sal.itesm.mx>
• Re: ATM Mirror Figure
  • From: Ramiro Hernandez <rhernand@campus.sal.itesm.mx>
• RE: ATM Clausing
  • From: Ramiro Hernandez <rhernand@campus.sal.itesm.mx>
• ATM plaster, etc.
  • From: Randy Johnson <randyj@nwlink.com>
• ATM Stepper Motor Resources
  • From: Randy Johnson <randyj@nwlink.com>
• ATM More on Plaster for Tools
  • From: Randy Johnson <randyj@nwlink.com>
• ATM Plaster for Tools-Technical Data Sheet Summary
  • From: Randy Johnson <randyj@nwlink.com>
• ATM Alika K. Herring
  • From: Randy Johnson <randyj@nwlink.com>
• RE: ATM 1st mirror - machine use
  • From: Randy Johnson <randyj@nwlink.com>
• ATM RE:rouge stains, pitch and turpentine
  • From: Randy Johnson <randyj@nwlink.com>
• ATM Re:Help with Foucault test
  • From: Randy Johnson <randyj@nwlink.com>
• ATM RE:Problem polishing!!
  • From: Randy Johnson <randyj@nwlink.com>
• Re: ATM Amateur Space Telescope, (AST)
  • From: Redwad <redwad@pacific.telebyte.com>
• ATM Baking Bread
  • From: Redwad <redwad@pacific.telebyte.com>
• ATM: re cutting glass
  • From: Redwad <redwad@pacific.telebyte.com>
• ATM Re: FRP board
  • From: Redwad <redwad@pacific.telebyte.com>
• ATM RE: FRP board
  • From: Redwad <redwad@pacific.telebyte.com>
• ATM University Optics
  • From: Redwad <redwad@pacific.telebyte.com>
• ATM ZUD
  • From: Redwad <redwad@pacific.telebyte.com>
• ATM Interferometric Testing
  • From: ab866@freenet.durham.org (ric rokosz)
• ATM Re: Lightpipe (fwd)-Interferometric Testing
  • From: ab866@freenet.durham.org (ric rokosz)
• ATM Waineo96 - buggy?
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM 1" thick glass at $450 for 13" plate!?
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM Waineo null test, first impression
  • From: ab866@freenet.durham.org (ric rokosz)
• ATM Finite element analysis software
  • From: ab866@freenet.durham.org (ric rokosz)
• ATM Digest -FEA software
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM Removing coating.
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM Using a used tool to grind a new mirror-reply
  • From: ab866@freenet.durham.org (ric rokosz)
• ATM Sub diameter Tools
  • From: ab866@freenet.durham.org (ric rokosz)
• ATM FEA resources on the Net
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM Sub diameter Tools -2
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM A Visit to Griffith Observatory
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM Amateur Space Telescope, (AST)
  • From: ric rokosz <ab866@freenet.durham.org>
• ATM CCD's and mirror F/#
  • From: ric rokosz <ab866@freenet.durham.org>
• Re: ATM CCD's and mirror F/#
  • From: ric rokosz <ab866@freenet.durham.org>
• ATM Ritchey-Chretien
  • From: "Rich Harman" <coffee@kuentos.guam.net>
• Re: ATM Ritchey-Chretien
  • From: "Rich Harman" <coffee@kuentos.guam.net>
• ATM Nothing but heat....
  • From: "Richard Combs" <Richard.Combs@quickmail.llnl.gov>
• Re: ATM TM Magazine Re-prints?
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Amateur Space Telescope, (AST)
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Anodizing
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM TM Magazine
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM TM Mag on CD?
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Grooved Tools
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Focus questions for my 4.25" f/10 Newtonian
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: Re[2]: ATM 10in. Mirror--Star Test ?'s
  • From: Richard Schwartz <richas@chelsea.ios.com>
• ATM Telescope Making Classes in Hollyweird
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Focal length: How long is too long?
  • From: Richard Schwartz <richas@chelsea.ios.com>
• ATM Turned Down Edge and FEM
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Optical standards
  • From: Richard Schwartz <richas@chelsea.ios.com>
• ATM Re: Shareware FEM
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Removing coating.
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM tricks from the kitchen (and loundry)
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM tricks from the kitchen (and loundry)
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Removing coating.
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: Re[6]: ATM 1" thick glass at $450 for 13" plate!?
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Painting Diagonal Mirror Edges Black
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM pre-generated curve - what then
  • From: Richard Schwartz <richas@chelsea.ios.com>
• ATM 1/d1 + 1/d2 = 2/R = 1/f
  • From: Richard Schwartz <richas@chelsea.ios.com>
• ATM Shareware Finite Element Software
  • From: Richard Schwartz <richas@chelsea.ios.com>
• ATM A Visit to Griffith Observatory
  • From: Richard Schwartz <richas@chelsea.ios.com>
• ATM turned edge
  • From: ras@well.com (Richard Soennichsen)
• ATM paraboloid woes
  • From: ras@well.com (Richard Soennichsen)
• ATM Dream House
  • From: ras@well.com (Richard Soennichsen)
• ATM figuring woes
  • From: ras@well.com (Richard Soennichsen)
• ATM Used Eight Inch Tool
  • From: ras@well.com (Richard Soennichsen)
• ATM Using a used tool to grind a new mirror
  • From: ras@well.com (Richard Soennichsen)
• ATM Ebony Star - crystal or touchstone?
  • From: Rick Stevenson <rick@stallion.oz.au>
• ATM Re: Ebony Star - crystal or touchstone?
  • From: Rick Stevenson <rick@stallion.oz.au>
• ATM Re: The Origin of Ebony Star Bearings
  • From: Rick Stevenson <rick@stallion.oz.au>
• Re: ATM Flocked paper
  • From: rhill@lpl.arizona.edu (Rik Hill)
• Re: ATM Re : First Mirror
  • From: rhill@lpl.arizona.edu (Rik Hill)
• Re: ATM Quality Of Silver Films
  • From: rhill@lpl.arizona.edu (Rik Hill)
• Re: ATM Optical standards
  • From: rhill@lpl.arizona.edu (Rik Hill)
• Re: ATM Mylar windows
  • From: rhill@lpl.arizona.edu (Rik Hill)
• Re: ATM Experience in solar filter for amateurs
  • From: rhill@lpl.arizona.edu (Rik Hill)
• ATM TM Magazine
  • From: "Rob O'Toole" <otoole@hpanvs.an.hp.com>
• ATM 4.25" Mirror Blanks Anyone?
  • From: "Rob O'Toole" <otoole@hpanvs.an.hp.com>
• ATM TM Magazine and Kalmbach Publishing
  • From: "Rob O'Toole" <otoole@hpanvs.an.hp.com>
• ATM Painting Diagonal Mirror Edges Black
  • From: "Rob O'Toole" <otoole@hpanvs.an.hp.com>
• Re: ATM Amateur Space Telescope, (AST)
  • From: Robert Duvall <rduvall@pixworks.com>
• ATM [Fwd: Republishing TM issues]
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: ATM Stalk spider construction and use?
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: Intermediate ATM project?
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: ATM 6" f/4 or not?
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: ATM Turned Down Edge and FEM
  • From: Robert Duvall <rduvall@pixworks.com>
• ATM Shareware FEM
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: ATM Aluminum Dew
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: ATM Painting Diagonal Mirror Edges Black
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: ATM sites of interest around San Jose, CA
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: ATM paraboloid woes
  • From: Rodger Petersen <faintfuzzy@worldnet.att.net>
• Re: ATM Ritchey-Chretien
  • From: Rodger Petersen <faintfuzzy@worldnet.att.net>
• Re: ATM Clausing
  • From: Rodger Petersen <faintfuzzy@worldnet.att.net>
• Re: ATM Cutting circular woodpieces
  • From: Rodger Petersen <faintfuzzy@worldnet.att.net>
• ATM Polishing Problem
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM RE: Polishing Problem
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM Re: By the Light of the Silvery Mirror
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM Re: Chretien
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM French opticians
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM Re: Pronunciation Help
  • From: ceragioli@uh.edu (Roger C. Ceragioli)
• ATM The Origin of Ebony Star Bearings
  • From: RRavneberg@aol.com
• Re: ATM Amateur Space Telescope, (AST)
  • From: santryl@cadvision.com
• Re: ATM Focusers
  • From: santryl@cadvision.com
• Re: ATM Ritchey-Chretien
  • From: santryl@cadvision.com
• Re: ATM squares of glass instead of tile; adhesives generally
  • From: santryl@cadvision.com
• Re: ATM Cutting circular woodpieces
  • From: santryl@cadvision.com
• ATM 18-point cell design software
  • From: "Scarf, Michael MD" <Scarf.Michael.MD@bhp.com.au>
• ATM Super Polaris Mount
  • From: scott@berfield.xo.com (Scott Berfield)
• ATM pre-generated curve - what then
  • From: scott@berfield.xo.com (Scott Berfield)
• Re: ATM First plaster and tile tool
  • From: sdilling@ford.com (Stephen Dillinger)
• Re: ATM Dew Prevention Experience?
  • From: sdilling@ford.com (Stephen Dillinger)
• Re: ATM Removing coating.
  • From: sdilling@ford.com (Stephen Dillinger)
• Re: ATM 18-point cell design
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM 18-point cell design
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM 18-point cell design software
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• ATM Flocked paper - UK sources?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM First plaster and tile tool
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM TM Mag on CD?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM TM Mag on CD?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Baking Bread
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Teflon etching question
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Best way to manipulate small blank?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM: re cutting glass
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Ritchey-Chretien
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Re: Chretien
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Largest Mirror on Waineo Machine?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• 5 micron grit -- UK suppliers(was: ATM 500 grit done, what next ??)
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Largest Mirror on Waineo Machin
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM first mirror
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: 5 micron grit -- UK suppliers(was: ATM 500 grit done, wh
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Toy wheels for dob bearings
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Interactive Ray Trace Pgm
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Anyone sell Foucault testers?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Bracket for Micrometer on Foucault Tester?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM foucult tester (better living thru chemistry/smooth threads)
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Removing coating.
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM RE:rouge stains, pitch and turpentine
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM foucult tester (better living t
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Finding TEX?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Eyepiece Focus
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Diagonal Mounting Procedure.
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• ATM Of clocks, timers, drive electronics, etc...
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Experience in solar filter for amateurs
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM RFT wrinkles
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Pitch Laps (there is aquestion at the end)
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• ATM RE: Aluminum Mirror Project
  • From: sfollett@wco.com (Steve Follett)
• Re: Intermediate ATM project?
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• ATM 1st mirror goal - overcorrected
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• Re: Intermediate ATM project
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• Re: ATM Ritchey-Chretien
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• Re: ATM Ritchey-Chretien
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• ATM List of black coatings from Lick Obs.
  • From: steve@wostx.com (Steve Strickland)
• ATM TM Mag on CD?
  • From: steve@wostx.com (Steve Strickland)
• ATM TM Mag on CD?
  • From: steve@wostx.com (Steve Strickland)
• Re: ATM Polishing Problem
  • From: steve@wostx.com (Steve Strickland)
• Re: ATM Focus questions for my 4.25" f/10 Newtonian
  • From: steve@wostx.com (Steve Strickland)
• Re: ATM Hey! Has anyone made a biscut cutter?
  • From: steve@wostx.com (Steve Strickland)
• Re: ATM TM Magazine and Kalmbach Publishing
  • From: steve@wostx.com (Steve Strickland)
• Re: ATM First Mirror
  • From: steve@wostx.com (Steve Strickland)
• Re: ATM TM Magazine and Kalmbach Publishing
  • From: steve@wostx.com (Steve Strickland)
• Re: ATM pre-generated curve - what then
  • From: steve@wostx.com (Steve Strickland)
• ATM Amateur Space Telescope
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM a
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM 6" f/10 vs 10" f/6
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Coating Lab Accidents
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Star Testing
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Dew Prevention Experience?
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Dew Prevention in Newtonians
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Aluminum Tubes
  • From: Sue&Alan French <72724.2270@compuserve.com>
• Re: ATM Anodizing
  • From: sumner & birkmann <sumbir@is.usmo.com>
• ATM Mirror Coating survey
  • From: sumner & birkmann <sumbir@is.usmo.com>
• ATM add. question for coating survey
  • From: sumner & birkmann <sumbir@is.usmo.com>
• ATM interpretation of star test
  • From: sumner & birkmann <sumbir@is.usmo.com>
• Re: ATM Focus questions for my 4.25" f/10 Newtonian
  • From: sumner & birkmann <sumbir@is.usmo.com>
• ATM Focal length: How long is too long?
  • From: sumner & birkmann <sumbir@is.usmo.com>
• Re: ATM Re:Interpretation of Star Test
  • From: sumner & birkmann <sumbir@is.usmo.com>
• Re: ATM Focus questions for my 4.25" f/10 Newtonian
  • From: sumner & birkmann <sumbir@is.usmo.com>
• ATM Dob dig. set. circles on split ring?
  • From: sumner & birkmann <sumbir@is.usmo.com>
• ATM OK to put price quotes on list?
  • From: sumner & birkmann <sumbir@is.usmo.com>
• ATM Results of mirror coating survey
  • From: sumner & birkmann <sumbir@is.usmo.com>
• Re: ATM Question about mounts and astrophotography?
  • From: sumner & birkmann <sumbir@is.usmo.com>
• Re: ATM Results of mirror coating survey
  • From: sumner & birkmann <sumbir@is.usmo.com>
• ATM Need source for observatory plans
  • From: sumner & birkmann <sumbir@is.usmo.com>
• ATM Beginers books
  • From: Terry Churchill <tcdc@vision.net.au>
• Re: ATM Ritchey-Chretien
  • From: "Thomas R. Williams" <trw@ruf.rice.edu>
• Re: ATM Amateur Space Telescope, (AST)
  • From: Tim Poulsen <Tim_Poulsen@zd.com>
• ATM Common sources for oxalic acid
  • From: Tim Poulsen <Tim_Poulsen@zd.com>
• ATM Re: Experience in solar filter for amateurs
  • From: Tim Poulsen <Tim_Poulsen@zd.com>
• ATM I'm new at this
  • From: Timothy Shank <timshank@cvn.net>
• ATM Two thumbs up for Silvering Video
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• ATM 1st mirror goal - overcorrected
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Blank & tool mating patterns
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Re: Mounts
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Anyone sell Foucault testers?
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM 1st mirror - machine use
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Re: Micrometers and stuff for foucault testers
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Stalk spider construction and use?
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Tile tool on 8" blank
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Chemical Silvering
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Waineo Null test?
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Chemical Silvering Questions ?
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Re : First Mirror
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Massive indecision!
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Hey! Has anyone made a biscut cutter?
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Moon Seeing vs: Other Objects
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Life of sorrow
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Hey! Has anyone made a biscut cutter?
  • From: Tom.Stock@gsbsc.gensig.com
• ATM 1" thick glass at $450 for 13" plate!?
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Teflon etching question
  • From: Tom.Stock@gsbsc.gensig.com
• ATM 1" Thick glass is cheaper in squares
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM 1" thick glass at $450 for 13" plate!?
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM 1" Thick glass is cheaper in several squares
  • From: Tom.Stock@gsbsc.gensig.com
• ATM 6" f/4 or not?
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM 6" f/4 or not?
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM 6" f/4 or not?
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Largest Mirror on Waineo Machine?
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Largest Mirror on Waineo Machin
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Re: FRP board
  • From: Tom.Stock@gsbsc.gensig.com
• Re: 5 micron grit -- UK suppliers(was: ATM 500 grit done, wh
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Toy wheels for dob bearings
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Turned Down Edge and FEM
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Optical standards
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Optical standards
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Toy wheels for dob bearings
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Helium filled optical tubes
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Mylar windows
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Anyone sell Foucault testers?
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Helium filled optical tubes
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Clausing
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Number for Edmund Sci?
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Anyone sell Foucault testers?
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Number for Edmund Sci? Got it Thanks!
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Bracket for Micrometer on Foucault Tester?
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM University Optics
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM a plea...to edit follow-up postings
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Aluminum Tubes
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Removing coating.
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Removing coating.
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Question about mounts and astrophotography?
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Finding TEX?
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Figuring fast mirrors
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM Figuring fast mirrors
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• ATM Best way to manipulate small blank?
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM Removing coating.
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• ATM RFT wrinkles
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM RFT wrinkles
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM RFT wrinkles
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM RFT wrinkles
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM Removing coating.
  • From: Tony Lenbach <tony@asl3.asl-labs.bc.ca>
• Re: ATM Ritchey-Chretien
  • From: tpuckett <tpuckett@mindspring.com>
• Re: ATM Ritchey-Chretien
  • From: tpuckett <tpuckett@mindspring.com>
• ATM price for bronze gear??
  • From: tpuckett <tpuckett@mindspring.com>
• Re: ATM First plaster and tile tool
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Re: atm-digest V1 #323
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Re: atm-digest V1 #323
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Woodworking compatib
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Coating Lab Accidents
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Quality And Magnification
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Blank & tool mating patterns
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Star Testing
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• RE: ATM 1" Thick glass is cheaper in several squares
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• ATM High school astronomy project
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• ATM Optical standards
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Re: Chretien
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM First Mirror
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• ATM optical standards
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• ATM Optical Standards II
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Re: Chretien
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Mylar windows
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Mylar windows
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Clausing
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• ATM Diagonal
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM more lurie
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM macs, atms and parallel ports
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM mirrors, glass and clothing
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM why the moon looks so good
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM shareware fem
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM IRT
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM fraser and his pitch lap
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>