[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: [ATM] Stubborn TDE
-----Original Message-----
From: atm-bounces@atmlist.net [mailto:atm-bounces@atmlist.net] On Behalf Of
David Steinhauer
Sent: Thursday, August 31, 2006 11:08 PM
To: Jerry
Cc: atm@atmlist.net
Subject: Re: [ATM] Stubborn TDE
> Keeping it trimmed smaller is probably causing some of the tde.
Really? I thought the danger was the lap being to large, and
overhanging the edge of the mirror when it is being pressed. I've been
keeping it trimmed maybe 1 mm smaller than the mirror on all sides.
Should I not be trimming it this much?
David
I think I know what Jerry is talking about but forget exactly how it
works. I don't think 1MM is too much, probably good.
Mitch
_______________________________________________
ATM mailing list http://www.atmlist.net/