[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Focuser, Derotator, Off Axis Guider

To: <atm@atmlist.net>
Subject: Re: [ATM] Focuser, Derotator, Off Axis Guider
From: "Mel Bartels" <mbartels@bbastrodesigns.com>
Date: Thu, 22 Sep 2005 17:50:52 -0700
List-Archive: <http://www.atmlist.net/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <mailman.3.1127358000.24568.atm@atmlist.net><1127400244.4332c3346ca42@modem.webmail.t-online.de><002801c5bf9d$76aa7360$59b5c918@joehome>
Sender: atm-bounces@atmlist.net

> I'm dreaming of a guiding software that could account for a non-rotated
> guidescope on an alt-az mount. That should't be impossible to program and
> would make the joy of many alt-az users!

As I have posted at least once before on this topic.  Rusty Fletcher has 
developed a piece of middleware that sits between MaxMDL and 
Scope.exe/ScopeII, that calculates a guiding differential.  Please check the 
archives for details.

Mel Bartels 

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] Focuser, Derotator, Off Axis Guider
  - From: martin.cibulski@t-online.de
- Re: [ATM] Focuser, Derotator, Off Axis Guider
  - From: Jonathan Lavoie <atm@lavoielactee.net>

Prev by Author: Re: [ATM] squaring truss tubes and collimation
Next by Author: Re: [ATM] keep polishing or return to fine grinding?
Prev by thread: Re: [ATM] Focuser, Derotator, Off Axis Guider
Next by thread: Re: [ATM] Focuser, Derotator, Off Axis Guider
Index(es):
- Author
- Thread