[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] Glass Blank Question

To: <atm@atmlist.net>
Subject: [ATM] Glass Blank Question
From: "Jason Lehmann" <jtravel@bellsouth.net>
Date: Thu, 8 Sep 2005 19:03:18 -0400
List-Archive: <http://www.atmlist.net/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net
Thread-Index: AcW0yYA92A299LjTR4Oa4kN/KXZPGA==

Hi All,

 

I have a 15"  diameter by 1" thick piece of glass with a density of
2.685g/cm3.  It looks like this disk is in the crown glass group.  Any ideas
on what to do with this blank?  I would like to make a mirror out of it but
I read somewhere that crown is not the best substrate for a mirror.  Any
help would be appreciated.

 

Thanks,

 

Jason

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Glass Blank Question
  - From: "Bob May" <bobmay@nethere.com>
- Re: [ATM] Glass Blank Question
  - From: Guy Brandenburg <gfbrandenburg@yahoo.com>
- Re: [ATM] Glass Blank Question
  - From: "Jerry" <wa4guu@verizon.net>
- Re: [ATM] Glass Blank Question
  - From: "Jerry" <wa4guu@verizon.net>
- Re: [ATM] Glass Blank Question
  - From: "Richard F.L.R. Snashall" <rflrs@rcn.com>

Prev by Author: Re: [ATM] Mirror clips
Next by Author: Re: [ATM] Glass Blank Question
Prev by thread: [ATM] Glass and Ceramics heating at high temperature
Next by thread: Re: [ATM] Glass Blank Question
Index(es):
- Author
- Thread