[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] The UPS modified Meade

To: <atm@atmlist.net>
Subject: Re: [ATM] The UPS modified Meade
From: "Don Clement" <clement.focuser@verizon.net>
Date: Thu, 2 Sep 2004 08:18:32 -0700
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <000001c49089$54ae60d0$6501a8c0@workstudy><000401c4908f$0139ba20$ff67fea9@ev1.net><002001c49091$820156c0$0300a8c0@everestkc.net>
Sender: atm-bounces@atmlist.net

Stainless steel shim stock can be used for making secondary arachnoid vanes.
Shim stock comes in sheets and rolls. Can be cut to size with scissors,
shears or even chemically milled like a printed circuit board using ferric
chloride or ammonium perchlorate.  Shim stock is available from industrial
hardware stores or from McMaster-Carr  http://www.mcmaster.com/  or Small
Parts http://www.smallparts.com/



Don Clement

Running Springs, California

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] The UPS modified Meade
  - From: "Byron Ader" <byron@www.astronomygeek.us>
- Re: [ATM] The UPS modified Meade
  - From: "Jerry B. Hillman" <JBHillman@ev1.net>
- Re: [ATM] The UPS modified Meade
  - From: buck childers <bchilders@everestkc.net>

Prev by Author: [ATM] High Zone Drifter
Next by Author: Re: [ATM] stainless layout
Prev by thread: Re: [ATM] The UPS modified Meade
Next by thread: [ATM] Thin mirrors
Index(es):
- Author
- Thread