Re: ATM Lynxx CCD's - A question of compatibility.

[Andrew Tubbiolo <enigma@seds.lpl.arizona.edu>]

On Sat, 28 Sep 2002, Jon Wilson wrote:
>
> The card that came with the CCD will fit the sockets on my motherboard,
> but the Pentium chip's position on the motherboard blocks installation.
> This leaves only the PC's video card described above.

	I'm showing my ignorance here, but here goes. Is the slot a PCI or
AGP port? If it's an AGP port (Which are usually brown and recessed
further back from the back of the motherboard than the other [usually
white] PCI slots.) you cannot use a PCI card in it. However, it sounds
like your CCD may have an S-Video output because you are asking if it will
work with an existing VGA card. I guess I just don't understand what the
interface is you are using.

Andrew