[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM 10" help - TDE?

To: "Ken Hunter" <kb7h@onemain.com>, "Tyrone Steele" <atm@pivotmusic.com>, "ATM" <atm@shore.net>
Subject: Re: ATM 10" help - TDE?
From: "Harold" <adams@rmci.net>
Date: Thu, 26 Sep 2002 10:29:22 -0600
References: <4.3.1.0.20020925112401.02988798@mail.texas.net> <00dc01c2650b$63f28900$6401a8c0@pluto> <007c01c2651b$9f64c920$0acbd4cc@kenshomepc>
Reply-To: "Harold" <adams@rmci.net>
Sender: owner-atm@shore.net


>
> For working the edge, Work TOT, stroke from the center of the
> mirror taking the tool center almost to the edge and imagine that
> you are pushing glass from the middle zones out to the edge of the
> mirror. (Do not push the glass OVER THE EDGE!)
>
> Return the tool to the center (without pressure), repeat the stroke
> then rotate the tool and step sideways. Repeat the whole process
> until you've made a couple trips around the mirror.

     This means the overhang is on the forward stroke only?   Also, im not
clear what you mean by steping sideways. Can you elaborate?

References:
- Re: ATM 10" help - TDE?
  - From: "John D. Upton" <jd-upton@texas.net>
- Re: ATM 10" help - TDE?
  - From: "Tyrone Steele" <atm@pivotmusic.com>
- Re: ATM 10" help - TDE?
  - From: "Ken Hunter" <kb7h@onemain.com>

Prev by Author: Fw: ATM Sunspot test: A cruel joke?
Next by Author: ATM hyperbola
Prev by thread: Re: ATM 10" help - TDE?
Next by thread: Re: ATM 10" help - TDE?
Index(es):
- Author
- Thread