Re: ATM fig.34...? 14.5 i.s.

[Aplanatic@aol.com]

Stan writes:

> p-v = 1/5.1
>  rms =1/18.8
>  transverse = 2.92
>  do i use the p-v or the rms. to decide what percent of a wave i have.
>  the mirror has to cool down, theese readings were taken abput 30 minuts
>  after figuring.

Definately take some additional measurements and average them.  If the 
results remain this good, I would star test the mirror.  If the star test 
shows good performance then you are done.

Dave Rowe.