[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM secondary holder ?

To: atm@shore.net
Subject: Re: ATM secondary holder ?
From: Andy Saulietis <iss@pvtnetworks.net>
Date: Thu, 21 Sep 2000 21:25:56 -0600
In-Reply-To: <007f01c0243a$550814f0$1e4584a9@secret01>
References: <000001c023c2$3d6dfda0$1400000a@MARKWORK><000501c023d5$734546a0$87602582@psy.vu.nl><39CA524A.FA917DB9@att.net>
Reply-To: Andy Saulietis <iss@pvtnetworks.net>
Sender: owner-atm@shore.net


Richard writes,

>How do you drill holes in a hacksaw blade?  I wrecked a lot
>of drill trying to do it!

Heat it red hot & let it cool to take out the temper.
Or use a carbide bit (not the masonry kind). Use slow
RPM & lots of pressure to avoid work hardening.


Andy Saulietis
ISS Enterprises
39 Silver Fox Trail
Mayhill NM 88339
505-687-3067 voice
505-687-3021 fax, call voice or e-mail to set up
e-mail: iss@pvtnetworks.net

Follow-Ups:
- Re: ATM secondary holder ?
  - From: The Silent Observer <silent1@ix.netcom.com>

References:
- ATM secondary holder ?
  - From: "Mark Rice" <mark@codewayb.demon.co.uk>
- Re: ATM secondary holder ?
  - From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM secondary holder ?
  - From: Michael Lindner <mikel@att.net>
- Re: ATM secondary holder ?
  - From: "Richard" <richas@idt.net>

Prev by Author: Re: ATM gluing glass
Next by Author: Re: ATM P-V vs. RMS
Prev by thread: Re: ATM secondary holder ?
Next by thread: Re: ATM secondary holder ?
Index(es):
- Author
- Thread