Amateur Telescope Makers (ATM) Archive for OCT96 - by author

• Thread Index

• ATM Complete Computerized CCD telescope resources?
  • From: Aaron Henderson <rac@rtpnet01.rtpnet.org>
• ATM intro
  • From: akhwts1@peabody.sct.ucarb.com
• No Subject
  • From: akhwts1@peabody.sct.ucarb.com
• ATM making mirrors
  • From: akhwts1@peabody.sct.ucarb.com
• Re: ATM Roller bearing material
  • From: akhwts1@peabody.sct.ucarb.com
• Re: ATM Central Star in M57
  • From: Al Kelly <akelly@ghgcorp.com>
• Re: ATM M-57 visibility
  • From: Al Kelly <akelly@ghgcorp.com>
• ATM Re: CCD sensitivity
  • From: Al Kelly <akelly@ghgcorp.com>
• Re: ATM M-57 visibility
  • From: "Alan Levin" <ailevin@ix.netcom.com>
• Re: ATM Binoculars-Pawn... junk vs: quality?
  • From: "Alan Levin" <ailevin@ix.netcom.com>
• Re: ATM zerodur et al.
  • From: Alexander Yascovich <yas@kisa.iki.rssi.ru>
• Re: ATM "exotic" mirror materials
  • From: Alexander Yascovich <yas@kisa.iki.rssi.ru>
• ATM "exotic" mirror materials
  • From: chana@andr.UB.com (Allen Chan)
• ATM Why are amateur scopes so slow?
  • From: chana@andr.UB.com (Allen Chan)
• Re: ATM Book(s) covering truss-tube Dob design?
  • From: Alvin Huey <huey@dcn.davis.ca.us>
• ATM Kydex (?) plastic for secodary cages of Truss tube scopes
  • From: Alvin Huey <huey@dcn.davis.ca.us>
• ATM Archives updated for September
  • From: Andy Steere <andy@www.system.missouri.edu>
• Re: ATM Mylar windows / gratings
  • From: andydtg@alpha1.phoenix.net
• RE: ATM Dial indicator on mirror
  • From: andydtg@phoenix.net
• Re: ATM Eyepiece focal-plane position measurement.
  • From: andydtg@phoenix.net
• Re: ATM What is Beryllium?
  • From: andydtg@phoenix.net
• Re: ATM Roller bearing material
  • From: andyman@tiac.net (andyman)
• ATM Pitch lap question!
  • From: arning@itn.is (Arni Ingimundarson)
• Re: ATM Pitch lap question!
  • From: arning@itn.is (Arni Ingimundarson)
• ATM Grey mirror after polishing!!
  • From: arning@itn.is (Arni Ingimundarson)
• ATM Figuring with machine.
  • From: arning@itn.is (Arni Ingimundarson)
• ATM Remelting and pouring pitch!!
  • From: arning@itn.is (Arni Ingimundarson)
• ATM Re: atm-digest V1 #372
  • From: AstroFoxx@aol.com
• Re: ATM RFT wrinkles
  • From: behambu@ibm.net (Berthold Hamburger)
• Re: ATM RFT wrinkles (fwd)
  • From: behambu@ibm.net (Berthold Hamburger)
• Re: ATM UK Computer Dobs?
  • From: behambu@ibm.net (Berthold Hamburger)
• Re: ATM UK Computer Dobs?
  • From: behambu@ibm.net (Berthold Hamburger)
• Re: ATM Pop Goes the Tool
  • From: behambu@ibm.net (Berthold Hamburger)
• ATM Cassegrain
  • From: behambu@ibm.net (Berthold Hamburger)
• ATM Resource
  • From: behambu@ibm.net (Berthold Hamburger)
• ATM Router bits
  • From: behambu@ibm.net (Berthold Hamburger)
• ATM Router
  • From: behambu@ibm.net (Berthold Hamburger)
• ATM stepper circuit
  • From: behambu@ibm.net (Berthold Hamburger)
• Re: ATM stepper circuit
  • From: behambu@ibm.net (Berthold Hamburger)
• Re: ATM Re: stepper circuit
  • From: behambu@ibm.net (Berthold Hamburger)
• Re: ATM Refractor
  • From: behambu@ibm.net (Berthold Hamburger)
• ATM Collodion
  • From: behambu@ibm.net (Berthold Hamburger)
• Re: ATM forward from Raycash@aol.com - EQ platforms
  • From: behambu@ibm.net (Berthold Hamburger)
• Re: ATM trichloorethyleen
  • From: btk@ix.netcom.com (Bill Marriott )
• Re: ATM Refractors
  • From: wmcclain@salamander.com (Bill McClain)
• ATM tile tool trimming
  • From: Bill Prewitt <bprewitt@newreach.net>
• ATM CeO vs Rouge
  • From: Bill Prewitt <bprewitt@newreach.net>
• ATM Dawes Limit (sp?)
  • From: Brand <huntb@ucs.orst.edu>
• Re: ATM Am I Nuts?
  • From: Brand <huntb@ucs.orst.edu>
• Re: Re[2]: ATM Am I Nuts?
  • From: Brand <huntb@ucs.orst.edu>
• ATM Re: 4.25" Wing-nut idea...
  • From: Brand <huntb@ucs.orst.edu>
• Re: ATM ATm cost of Building mirrors
  • From: Brand <huntb@ucs.orst.edu>
• Re: ATM - Where to buy mirror blanks, grit etc.
  • From: Brand <huntb@ucs.orst.edu>
• Re: ATM f/D=6 why??
  • From: Brand <huntb@ucs.orst.edu>
• Re: ATM re: atm-digest V1 #367
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Enhanced Coatings.
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Enhanced Coatings.
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Enhanced coatings
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Cassegrain
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Pic du Midi (08/15/96 posting!)
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM Refractor
  • From: epabcc@epa.ericsson.se (Bratislav Curcic)
• Re: ATM C8 Paint Job
  • From: Brian Nestel <blast@aloha.net>
• ATM 4.25" mirror progress report!
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• ATM Re: Secondary Size and Diameter of fully illuminated
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• Re: Re[2]: ATM Pop Goes the Tool -Reply
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• ATM Radius of Curvature! ACK!
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• ATM Willman-Bell Phone System...
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• Re: ATM Willman-Bell Phone System... -Reply
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• ATM Re: atm-digest V1 #373
  • From: "C. J. Klingman" <klingman@onr.com>
• ATM Steppers and things
  • From: cab <carl@pader-online.de>
• Re: ATM Experience in solar filter for amateurs
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Enhanced Coatings.
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Calling all MacHeads!
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Kydex (?) plastic for secodary cages of Truss tube scopes
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM C8 Paint Job
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• ATM Eyepiece focal plane
  • From: "Chris Westland" <westland@uxmail.ust.hk>
• Re: ATM Experience in solar filter for amateurs
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM Enhanced Coatings.
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM Enhanced Coatings.
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM Re: Enhanced coatings
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM Re: Enhanced coatings
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM Central Star in M57
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM Complete Computerized CCD telescope resources?
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM Kydex
  • From: Chris Westland <westland@uxmail.ust.hk>
• ATM Meade 4000 series Plossels
  • From: Chris Westland <westland@uxmail.ust.hk>
• ATM Roller bearing material
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM What is Beryllium?
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM Roller bearing material
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM adaptive optics
  • From: Chris Westland <westland@uxmail.ust.hk>
• Re: ATM Roller bearing material
  • From: Chris Westland <westland@uxmail.ust.hk>
• ATM Another question on focus plane of eyepiece
  • From: Chris Westland <westland@uxmail.ust.hk>
• ATM D&G Optical
  • From: Christopher Scott--WA <73142.1535@compuserve.com>
• Re: ATM Presentation and Equatorial Plattforms.
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• RE: ATM Presentation and Equatorial Plattforms.
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• ATM Stepper Motor Woes
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• Re: ATM - Digital Setting Circles
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• ATM Eq Platforms
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• ATM Stepper circuit
  • From: cshaw@ghgcorp.com (Chuck Shaw)
• Re: ATM Re: 4.25" Wing-nut idea...
  • From: cds@peanut.sarnoff.com (Clay Spence x3039)
• Re: ATM figuring with screw
  • From: cds@peanut.sarnoff.com (Clay Spence x3039)
• ATM Black Optical Paint removal
  • From: clyde edgar <cedgar@pacificnet.net>
• ATM Collimating tool
  • From: Cooper <scooper@robles.callutheran.edu>
• Re: ATM Collimating tool
  • From: Cooper <scooper@robles.callutheran.edu>
• Re: ATM edge bevelling
  • From: Cooper <scooper@robles.callutheran.edu>
• ATM Off on the wrong foot
  • From: Cooper <scooper@robles.callutheran.edu>
• ATM Re: No Local Help
  • From: Cooper <scooper@robles.callutheran.edu>
• Re: ATM Re: No Local Help
  • From: Cooper <scooper@robles.callutheran.edu>
• Re: ATM Kydex (?) plastic for secodary cages of Truss tube scopes
  • From: Cooper <scooper@robles.callutheran.edu>
• ATM Rough grinding
  • From: Cooper <scooper@robles.callutheran.edu>
• ATM low weight focusers
  • From: Craig Tupper <ctupper@erols.com>
• ATM Mirror coating
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM Dial indicator on mirror
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM 1st mirror, polishing for 2+ hours :-)
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• ATM Checking Cass. Focal Length.
  • From: Dan Gray <grayarea@teleport.com>
• ATM Best Durable Coating?
  • From: Dan Gray <grayarea@teleport.com>
• Re: ATM Protecting 7805 Regulators
  • From: Dan Gray <grayarea@teleport.com>
• Re: ATM Re: stepper circuit
  • From: Dan Gray <grayarea@teleport.com>
• ATM Bowling Ball Mount
  • From: Dan Gray <grayarea@teleport.com>
• ATM Cassegrain Optics
  • From: Dan Gray <grayarea@teleport.com>
• Re: ATM trichloorethyleen
  • From: kc5gxl@juno.com (Dan Harriman)
• Re: ATM Sleeks
  • From: "Daniel Bakken" <dbakken@cet.com>
• Re: ATM Sleeks
  • From: "Daniel Bakken" <dbakken@cet.com>
• ATM coffee can
  • From: Daniel Walker <dwalker@SUL-ROSS-1.SULROSS.EDU>
• [Fwd: Re: ATM coffee can]
  • From: Daniel Walker <dwalker@SUL-ROSS-1.SULROSS.EDU>
• ATM none member submission??
  • From: Daniel Walker <dwalker@SUL-ROSS-1.SULROSS.EDU>
• ATM Re: Local help
  • From: Daniel Walker <dwalker@SUL-ROSS-1.SULROSS.EDU>
• ATM I AM nuts!
  • From: Darwin Teague <darwin@indy.net>
• ATM Re: RFT wrinkles
  • From: Dave McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Enhanced Coatings.
  • From: Dave McCarter <mccarterd@claven.fanshawec.on.ca>
• ATM Pop Goes the Tool
  • From: Dave McCarter <mccarterd@claven.fanshawec.on.ca>
• ATM C8 Paint Job
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• ATM Calling all MacHeads!
  • From: das@po.cwru.edu (Dave Sopchak)
• Re: ATM Calling all MacHeads!
  • From: das@po.cwru.edu (Dave Sopchak)
• Re: ATM silicone adhesive
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM silicone adhesive
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Best lap-making methods
  • From: Dave Sopchak <das@po.cwru.edu>
• ATM all busted up
  • From: Dave Sopchak <das@po.cwru.edu>
• ATM tile tool question
  • From: Dave Sopchak <das@po.cwru.edu>
• ATM mirror polish
  • From: DAVID MEHRDAD SAYAH <dsayah@ucla.edu>
• ATM Suggest motor for barndoor mount?
  • From: "David W. Stokes" <dstokes@texas.net>
• Re: ATM Stepper Motor Woes
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Stepper Motor Woes
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Stepper Motor Woes
  • From: Del Stanton <sdl20@pacificnet.net>
• ATM C & H Sales - Pasadena, California
  • From: Del Stanton <sdl20@pacificnet.net>
• ATM Protecting 7805 Regulators
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Protecting 7805 Regulators
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM curved single-vane spider
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Phenolic tubing for telescopes?
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Phenolic tubing for telescopes?
  • From: Del Stanton <sdl20@pacificnet.net>
• RE: ATM Dial indicator on mirror
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Kydex (?) plastic for secodary cages of Truss tube scopes
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Bowling Ball Mount
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Mirror blanks
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Automatic Solar tracker
  • From: Del Stanton <sdl20@pacificnet.net>
• Re: ATM Bipolar stepper controller chip suggestions
  • From: dhl@sprynet.com
• Re: ATM silicone adhesive
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM trichloorethyleen
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• ATM edge bevelling
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM edge beveling
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• ATM Mac/telescope control
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• ATM Mac/telescope control
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• ATM Heating your pitch
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM Heating your pitch
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM Re- No Local Help
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM Calling all MacHead
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• Re: ATM Collodion
  • From: "Don Loftus" <don_loftus@qm.server.ufl.edu>
• ATM re: atm-digest V1 #367
  • From: "Douglas Arion, Prof. Physics" <ariond1@carthage.edu>
• ATM re: atm-digest V1 #402
  • From: "Douglas Arion, Prof. Physics" <ariond1@carthage.edu>
• Re: ATM Best lap-making methods
  • From: ehs@teleport.com (Ed Stevens)
• RE: Re[2]: ATM Best lap-making methods
  • From: Ed Stevens <ehs@teleport.com>
• ATM Trueing up lenses for null test.
  • From: Ed Stevens <ehs@teleport.com>
• ATM D & G Optical
  • From: FR MICHAEL HANSEN SJ <hansen@s054.aone.net.au>
• ATM atm class
  • From: "Francis O'Reilly" <76504.1577@compuserve.com>
• Re: ATM Best lap-making methods
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM size of spiders
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM size of spiders
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM Beveling edge with a stone (was: a long title)
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [et@ugcs.caltech.edu (Ernest S. Tomlinson)]]
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM a bit to add.
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM Chipped Lap.
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Central Star in M57
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM flats (not M57)
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Re: 4.25" Wing-nut idea...
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Re: No Local Help
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM ATm cost of Building mirrors
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Re: No Local Help
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM ATm cost of Building mirrors
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Why are amateur scopes so slow?
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Why are amateur scopes so slow?
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM Flats
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Corrector Plate Fabrication
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM foucault test
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Schmidt vs. Houghton
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Re: Mirror grinding worktable.
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM Astrograph (plus a bit)
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM Corrector Plate Fabrication
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• Re: ATM f/D=6 why??
  • From: Fraser Clarke <fjc3@st-andrews.ac.uk>
• ATM figuring with screw
  • From: Gary McKenzie <aquarius@netspace.net.au>
• Re: ATM Collodion to clean their mirrors
  • From: "Gary Seronik" <gseronik@direct.ca>
• Re: ATM Eyepiece focal-plane position measurement.
  • From: "Gary Seronik" <gseronik@direct.ca>
• Re: ATM Eyepiece focal-plane position measurement.
  • From: "Gary Seronik" <gseronik@direct.ca>
• Re: ATM f/D=6 why??
  • From: "Gary Seronik" <gseronik@direct.ca>
• Re: ATM Mirror coating
  • From: gwoods@albany.net (Gary Woods)
• Re: ATM Re: MM5369 IC
  • From: gwoods@albany.net (Gary Woods)
• ATM Ring Nebula in Lyra, any estimates on the velocity?
  • From: "Geoff Dudley" <GDudley@swin.edu.au>
• Re: ATM mirror polish
  • From: Gstacy@gnn.com (Gil Stacy)
• Re: ATM Refractors
  • From: Gstacy@gnn.com (Gil Stacy)
• Re: ATM Null Tests
  • From: Gstacy@gnn.com (Gil Stacy)
• Re: ATM Null Tests
  • From: Gstacy@gnn.com (Gil Stacy)
• Re: ATM Enhanced Coatings.
  • From: Gord Seifert <gseifert@uniserve.com>
• ATM Stepper motors
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM Homeade collimation tool
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM: stepper motors
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM steppers - series resistors
  • From: Greg Granville <greg@laser.arl.psu.edu>
• No Subject
  • From: gperry@gaia.arc.nasa.gov (Guillaume Perry)
• ATM Working post
  • From: gperry@gaia.arc.nasa.gov (Guillaume Perry)
• No Subject
  • From: gperry@gaia.arc.nasa.gov (Guillaume Perry)
• No Subject
  • From: gperry@gaia.arc.nasa.gov (Guillaume Perry)
• RE: ATM Dial indicator on mirror
  • From: "Harry N. Bearman" <hbearman@metronet.com>
• ATM adaptive optics
  • From: Herminio Perez <74710.3115@compuserve.com>
• ATM Re: [APML]: Digest Format?
  • From: Herminio Perez <74710.3115@compuserve.com>
• Re: ATM Binoculars at the PAWN SHOP
  • From: "Howard L. Clausing" <hclaus@clausing.com>
• ATM The Little Astrograph That Isn't
  • From: Jack Schmidling <arf@mc.net>
• ATM Enhanced Coatings.
  • From: jklutts@up.net (James A. Klutts)
• ATM Front End Tube weight.
  • From: jklutts@up.net (James A. Klutts)
• ATM Orion 80mm Shorttube Refractor.
  • From: jklutts@up.net (James A. Klutts)
• ATM Newports Preformed Blanks.
  • From: jklutts@up.net (James A. Klutts)
• ATM Orion MAK-500
  • From: jklutts@up.net (James A. Klutts)
• Re: ATM Checking Cass. Focal Length.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Cassegrain
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM R-C Mirror Surfaces.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM: Test Accuracy.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Cassegrain Optics
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM Phenolic tubing for telescopes?
  • From: james.wilson@mail.utexas.edu (James Wilson)
• ATM Phenolic tubing source
  • From: james.wilson@mail.utexas.edu (James Wilson)
• Re: ATM trichloorethyleen
  • From: fieldsey@noao.edu (Jason Fields)
• Re: ATM M-57 visibility
  • From: fieldsey@noao.edu (Jason Fields)
• No Subject
  • From: Jay Shroff <shroffja@frc.com>
• Re: New ATM trilogy
  • From: Jay Shroff <shroffja@frc.com>
• ATM - Where to buy mirror blanks, grit etc.
  • From: Jay Shroff <shroffja@frc.com>
• ATM Re: Mirror grinding worktable.
  • From: Jay Shroff <shroffja@frc.com>
• Re: ATM Re: Mirror grinding worktable.
  • From: Jay Shroff <shroffja@frc.com>
• ATM f/D=6 why??
  • From: Jay Shroff <shroffja@frc.com>
• ATM figuring with a screw
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• Re: ATM Null Tests
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• Re: ATM Newports Preformed Blanks.
  • From: jf <jf@arn.net>
• ATM trichloorethyleen
  • From: JHM.van.Gastel@psy.vu.nl
• ATM re: atm-digest V1 #365
  • From: JHM.van.Gastel@psy.vu.nl
• ATM trichloorethyleen.
  • From: JHM.van.Gastel@psy.vu.nl
• ATM accuracy of centering primary mirror
  • From: JHM.van.Gastel@psy.vu.nl
• ATM tube lining
  • From: JHM.van.Gastel@psy.vu.nl
• ATM size of spiders
  • From: JHM.van.Gastel@psy.vu.nl
• ATM baffles
  • From: JHM.van.Gastel@psy.vu.nl
• ATM star-test
  • From: JHM.van.Gastel@psy.vu.nl
• ATM primary mirror-accuracy
  • From: JHM.van.Gastel@psy.vu.nl
• ATM mirror making
  • From: JHM.van.Gastel@psy.vu.nl
• Re: New ATM trilogy
  • From: "Jim Mason" <jmason@up.net>
• Re: ATM material sources
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: ATM Newports Preformed Blanks.
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: ATM 8" mirror questions - weight, good sources, mirror cells?
  • From: "John A. Volk" <103037.3107@compuserve.com>
• Re: ATM Steppers and things
  • From: "John D. Upton" <upton@austin.ibm.com>
• Re: ATM Suggest motor for barndoor mount?
  • From: John Demczyk <ofa078@durhamnews.net>
• ATM Bipolar stepper controller chip suggestions
  • From: John Demczyk <ofa078@durhamnews.net>
• ATM Dial indicator on mirror
  • From: hammer@en.com (John Humphrey)
• Re: ATM Beveling Nightmare
  • From: "John Stoneham" <jot@electrotex.com>
• ATM Off-axis paraboloid
  • From: "John Stoneham" <jot@electrotex.com>
• ATM curved single-vane spider
  • From: "John Stoneham" <jot@electrotex.com>
• ATM Schmidt vs. Houghton
  • From: "John Stoneham" <jot@electrotex.com>
• Re: ATM book 1 Question
  • From: "John Stoneham" <jot@electrotex.com>
• European ATM Site
  • From: JOOST VERHEYDEN <100603.306@compuserve.com>
• ATM Optical suppliers in Pittsburgh,PA area
  • From: Jose Amaury Pereira <jamaury@elogica.com.br>
• ATM Michigan Mirror grinding..
  • From: joneil@obs.empath.on.ca (Joseph O'Neil)
• Re: ATM Binoculars at the PAWN SHOP
  • From: joneil@obs.empath.on.ca (Joseph O'Neil)
• ATM Mirror Mounting - Think Tank
  • From: K1JJ@aol.com
• ATM Re: High Speed CPU
  • From: K1JJ@aol.com
• Re: ATM Mirror Mounting - Think Tank
  • From: K1JJ@aol.com
• Re: ATM UK Computer Dobs?
  • From: K1JJ@aol.com
• Re: ATM Stepper motors
  • From: K1JJ@aol.com
• ATM Central Star in M57
  • From: K1JJ@aol.com
• Re: ATM M-57 visibility
  • From: K1JJ@aol.com
• ATM Stepper Motor Help?
  • From: K1JJ@aol.com
• ATM Stepper Motors Help
  • From: K1JJ@aol.com
• ATM Binoculars at the PAWN SHOP
  • From: K1JJ@aol.com
• ATM Binoculars-Pawn... junk vs: quality?
  • From: K1JJ@aol.com
• ATM Binoculars-Pawn... junk vs: quality?
  • From: K1JJ@aol.com
• ATM Binoculars-Different coatings explained-
  • From: K1JJ@aol.com
• Re: ATM Binoculars-Pawn... junk vs: quality?
  • From: K1JJ@aol.com
• Re: ATM Binoculars at the PAWN SHOP
  • From: K1JJ@aol.com
• Re: ATM Binoculars at the PAWN SHOP
  • From: K1JJ@aol.com
• Re: Subject: Re: ATM Binoculars
  • From: K1JJ@aol.com
• Re: Re[2]: ATM Best lap-making methods
  • From: kflor@rmi.net (Ken Florentino)
• Re: Re[2]: ATM Best lap-making methods
  • From: kflor@rmi.net (Ken Florentino)
• Re: ATM M-57 visibility
  • From: kflor@rmi.net (Ken Florentino)
• Re: ATM The ISO MEETING IN GERMANY
  • From: Ken Lowther <s0109366@CC.YSU.EDU>
• Re: ATM Mirror blanks
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Mirror blanks
  • From: Ken Lowther <s0109366@CC.YSU.EDU>
• Re: ATM Binoculars at the PAWN SHOP
  • From: Ken Lowther <s0109366@CC.YSU.EDU>
• Dob/EQ scope design for ATM group?
  • From: Ken Noesgaard <Ken_Noesgaard@MBnet.MB.CA>
• Re: ATM Experience in solar filter for amateurs
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Best lap-making methods
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Pop Goes the Tool
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM edmund foucault tester
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM IRT5.2.1
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Binoculars at the PAWN SHOP
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Ladders
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM: Ross corrector spacings
  • From: kevin@aquilagroup.com (Kevin Ferguson)
• Re: ATM Collimating tool
  • From: Klaus Peter Schroder <schroder@ast.cam.ac.uk>
• Re: ATM Orion 80mm Shorttube Refractor.
  • From: Klaus Peter Schroder <schroder@ast.cam.ac.uk>
• Re: ATM primary mirror-accuracy
  • From: Klaus Peter Schroder <schroder@ast.cam.ac.uk>
• Re: ATM Suggest motor for barndoor mount?
  • From: Klaus Peter Schroder <schroder@ast.cam.ac.uk>
• Re: ATM Re: CCD sensitivity
  • From: Klaus Peter Schroder <schroder@ast.cam.ac.uk>
• Re: ATM Secondary Mounting
  • From: Klaus Peter Schroder <schroder@ast.cam.ac.uk>
• Re: ATM Refractors
  • From: Klaus Peter Schroder <schroder@ast.cam.ac.uk>
• Re: Re[2]: ATM Refractors
  • From: Klaus Peter Schroder <schroder@ast.cam.ac.uk>
• Re: Re[4]: ATM Refractors
  • From: Klaus Peter Schroder <schroder@ast.cam.ac.uk>
• ATM: Re: problem with off-axis guider focus
  • From: Klaus Peter Schroder <schroder@ast.cam.ac.uk>
• ATM Ladders
  • From: Kreig McBride <kmcbride@kali.nas.com>
• Re: ATM Ladders
  • From: Kreig McBride <kmcbride@kali.nas.com>
• ATM 7/8" diagonal mirror source?
  • From: Larry Manuel <lmanuel@agt.net>
• ATM Enhanced coatings
  • From: Larry Manuel <lmanuel@agt.net>
• ATM Follow-up; Best lap-making methods
  • From: Larry Manuel <lmanuel@agt.net>
• ATM Collodion to clean their mirrors
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: ATM What is Beryllium?
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: ATM Binoculars-Pawn
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: ATM Observatory BLDG designs?
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: ATM Front End Tube weight.
  • From: Len Lipton <llipton@erols.com>
• Re: ATM Orion 80mm Shorttube Refractor.
  • From: LorenBusch@aol.com
• ATM Optical suppliers in Pittsburgh, PA area
  • From: Lynne or Larry Manuel <lmanuel@agt.net>
• ATM Black Optical Paint removal
  • From: Lynne or Larry Manuel <lmanuel@agt.net>
• ATM Cartop optical tube, Newtonian cell thoughts.
  • From: Lynne or Larry Manuel <lmanuel@agt.net>
• ATM Phenolic tubing for telescopes?
  • From: Lynne or Larry Manuel <lmanuel@agt.net>
• ATM curved single-vane spider
  • From: Lynne or Larry Manuel <lmanuel@agt.net>
• ATM Correcting Mirror using Resistors
  • From: Lynne or Larry Manuel <lmanuel@agt.net>
• ATM Eyepiece focal-plane position measurement.
  • From: Lynne or Larry Manuel <lmanuel@agt.net>
• Re: ATM Eyepiece focal-plane position measurement.
  • From: Lynne or Larry Manuel <lmanuel@telusplanet.net>
• ATM eypiece data
  • From: Lynne or Larry Manuel <lmanuel@telusplanet.net>
• Re: ATM "exotic" mirror materials
  • From: mark lyon <o9938156@unicorn.it.wsu.edu>
• ATM Mirror blanks
  • From: "Mark O'Neal" <Marko@marino.demon.co.uk>
• ATM Secondary Mounting
  • From: mjstretch@real.com.au (Mark Stretch)
• Re: ATM Experience in solar filter for amateurs
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Re: Enhanced coatings
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Secondary Mounting
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• Re: ATM Roller bearing material
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• RE: ATM The Little Astrograph That Isn't
  • From: Mark Suchting <masuch@dap.CSIRO.AU>
• ATM Any Mirror making classes/groups (San Diego)?
  • From: "Marty Morris" <mmorris@hns.com>
• RE: ATM Presentation and Equatorial Plattforms.
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM Optical suppliers in Pittsburgh,PA area
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM Optical Simulation SW?
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM low weight focusers
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM curved single-vane spider
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM Kydex (?) plastic for secodary cages of Truss tube scopes
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM Eyepiece focal-plane position measurement.
  • From: Mathew Marulla <atm@tiac.net>
• ATM Aerial Lens Info
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM Bowling Ball Mount
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM Willman-Bell Phone System...
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM The Little Astrograph That Isn't
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM Observatory BLDG designs?
  • From: Mathew Marulla <atm@tiac.net>
• RE: ATM The Little Astrograph That Isn't
  • From: Mathew Marulla <atm@tiac.net>
• ATM Book(s) covering truss-tube Dob design?
  • From: Matt Hughes <mhughes@qualcomm.com>
• ATM 8" mirror questions - weight, good sources, mirror cells?
  • From: Matt Hughes <mhughes@qualcomm.com>
• RE: ATM - Pitch laps
  • From: xeno357@ix.netcom.com (Max ben-Aaron)
• RE: ATM Book(s) covering truss-tube Dob design?
  • From: "McKay, James W." <McKayJW@MASPO1.MAS.YALE.EDU>
• ATM Equatorial platform kits
  • From: "McKay, James W." <McKayJW@MASPO1.MAS.YALE.EDU>
• Re: ATM What is Beryllium?
  • From: "McKay, James W." <McKayJW@MASPO1.MAS.YALE.EDU>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Dan Brown <brownd@holmes.uchastings.edu>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM re: atm-digest V1 #367
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Best lap-making methods
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Enhanced Coatings.
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Pitch lap question!
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Pitch lap question!
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Pitch lap question!
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Best lap-making methods
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [John Vogt <atmer@mail.idt.net>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Steppers and Reducer for Mel's Dob Drive
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [et@ugcs.caltech.edu (Ernest S. Tomlinson)]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Collimating tool
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM To wax or not to wax.
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Chipped Lap.
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Cassegrain
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Admin request]
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Kurt Hillig <khillig@Chem.LSA.umich.edu>]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM M57 central star visibility
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Kurt Hillig <khillig@Chem.LSA.umich.edu>]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [OPTIXWIZ@aol.com]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM steppers
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Bipolar stepper controller chip suggestions
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM stepper circuit
  • From: Mel Bartels <mbartels@efn.org>
• ATM stepper motors
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [astro <astro@nando.net>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Complete Computerized CCD telescope resources?
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Re: atm-digest V1 #373
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [rgb@ncube.com (Bob Bond)]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM stepper circuit
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM stepper circuit
  • From: Mel Bartels <mbartels@efn.org>
• ATM etiquette
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: Non-member submission from [Rodger Petersen <"faintfuzzy@worldnet.att.net"@www.worldnet.att.net>]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM Re:
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Re: stepper circuit
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Sleeks
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["Mark VandeWettering" <markv@tick>]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Greg Dermer <gdermer@ichips.intel.com>]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["Mark VandeWettering" <markv@tick>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM mirror making
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Eyepiece focal-plane position measurement.
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Why are amateur scopes so slow?
  • From: Mel Bartels <mbartels@efn.org>
• ATM the true price of home grown optics
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Lynne or Larry Manuel <lmanuel@telusplanet.net>]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: msg
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Kurt Hillig <khillig@Chem.LSA.umich.edu>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Eyepiece focal-plane position measurement.
  • From: Mel Bartels <mbartels@efn.org>
• ATM Non-member submission from [Daniel Walker <danielw@wolf.sulross.edu>]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM Non-member submission from [Ken Slater <KSlater@hloexc1.hlo.dec.com>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM 1st mirror, polishing for 2+ hours :-)
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM CeO vs Rouge
  • From: Mel Bartels <mbartels@efn.org>
• ATM forward from Raycash@aol.com - EQ platforms
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Rough grinding
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Roller bearing material
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Roller bearing material
  • From: Mel Bartels <mbartels@efn.org>
• ATM steppers
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Roller bearing material
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM steppers: current models ? ? ?
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [btk@ix.netcom.com (Bill Marriott )]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM making mirrors
  • From: "Michael J. Edelman" <mje@bob.pass.wayne.edu>
• Re: ATM Best lap-making methods
  • From: mycall@rt66.com (Michael Pendley)
• re ATM Collodion to clean
  • From: Michael Pendley <mycall@sandia.gov>
• Re: ATM Book(s) covering truss-tube Dob design?
  • From: Michael Pendley <mycall@rt66.com>
• ATM Beveling Nightmare
  • From: thomrob@iamerica.net (Michael Robinson)
• ATM Re: Local Help
  • From: thomrob@iamerica.net (Michael Robinson)
• Re: ATM trichloorethyleen
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Best lap-making methods
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• ATM To wax or not to wax.
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM The ISO MEETING IN GERMANY
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Radius of Curvature! ACK!
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Chemistry of silvering
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• ATM Coatings & wavefronts
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [et@ugcs.caltech.edu (Ernest S. Tomlinson)]]
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Central Star in M57
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Secondary Mounting
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Sleeks
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM "exotic" mirror materials
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Refractors
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Refractors
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Refractors
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Refractors
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Binoculars at the PAWN SHOP
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Binoculars-Pawn... junk vs: quality?
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM 8" mirror questions - weight, good sources, mirror cells?
  • From: spooner@page.az.net (Michael Spooner)
• ATM book 1 Question
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM f/D=6 why??
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Ladders
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM trichloorethyleen
  • From: Mike McKee <mckee@ix.netcom.com>
• ATM web&mirror making
  • From: Muzaffer BUYUKKARAGOZ <b9115761@bey.cc.hun.edu.tr>
• ATM Presentation and Equatorial Plattforms.
  • From: Nahuel Iglesias <nahuel@arrakis.fcaglp.unlp.edu.ar>
• Re: ATM edge bevelling
  • From: Nahuel Iglesias <nahuel@arrakis.fcaglp.unlp.edu.ar>
• Re: ATM: Ross corrector spacings
  • From: Neil Pegg <Neil.Pegg@src.bae.co.uk>
• ATM steppers: current models ? ? ?
  • From: Olivier Biot <Olivier.Biot@rug.ac.be>
• ATM: Coatings questions answered and more questions
  • From: optics@savenet.com (Optics)
• ATM Collodion to clean
  • From: optics@savenet.com (Optics)
• Re: ATM: Coatings questions answered and more questions
  • From: optics@savenet.com (Optics)
• Re: ATM: Coatings questions answered and more questions
  • From: optics@savenet.com (Optics)
• Re: ATM Cassegrain go for it.
  • From: optics@savenet.com (Optics)
• ATM UK Computer Dobs?
  • From: Paul Marshall <P_MARSHALL@creations.co.uk>
• ATM Meade Starfinder update
  • From: Payet Thierry <th.payet@guetali.fr>
• ATM coated prism
  • From: Peter Abrahams <telscope@europa.com>
• ATM beryllium redux
  • From: Peter Abrahams <telscope@europa.com>
• ATM edge bevelling
  • From: peter gillette <gillette@together.net>
• Re: ATM Corrector Plate Fabrication
  • From: notpete@scn.org (Peter Hirtle)
• ATM Non-standard grinding machine
  • From: PFAFF2@delphi.com
• Re: ATM Mylar windows
  • From: PFAFF2@delphi.com
• Re: ATM trichloorethyleen
  • From: PFAFF2@delphi.com
• ATM accuracy of centering primary mirro
  • From: PFAFF2@delphi.com
• ATM Grinding Questions
  • From: PFAFF2@delphi.com
• ATM To wax or not to wax.
  • From: PFAFF2@delphi.com
• Re: ATM Am I Nuts?
  • From: PFAFF2@delphi.com
• ATM Central Star in M57
  • From: PFAFF2@delphi.com
• ATM M57 central star visibility
  • From: PFAFF2@delphi.com
• ATM Phenolic tubing for telescopes?
  • From: PFAFF2@delphi.com
• Re: ATM Phenolic tubing for telescopes?
  • From: PFAFF2@delphi.com
• ATM Sleeks
  • From: PFAFF2@delphi.com
• ATM Dial indicator on mirror
  • From: PFAFF2@delphi.com
• ATM figuring with screw
  • From: PFAFF2@delphi.com
• ATM Sonotube
  • From: PFAFF2@delphi.com
• Re: ATM the true price of home grown op
  • From: PFAFF2@delphi.com
• ATM Figuring with machine.
  • From: PFAFF2@delphi.com
• ATM CeO vs Rouge
  • From: PFAFF2@delphi.com
• ATM forward from Raycash@aol.com - EQ p
  • From: PFAFF2@delphi.com
• ATM Eq Platforms
  • From: PFAFF2@delphi.com
• Re: ATM Corrector Plate Fabrication
  • From: PFAFF2@delphi.com
• Re: ATM Eq Platforms
  • From: PFAFF2@delphi.com
• ATM Houghton Telescopes
  • From: PFAFF2@delphi.com
• Re: ATM Corrector Plate Fabrication
  • From: PFAFF2@delphi.com
• Re: ATM Corrector Plate Fabrication
  • From: PFAFF2@delphi.com
• Re: ATM Ladders
  • From: PFAFF2@delphi.com
• ATM Partial eclipse: webcam at MIRA Public Observatory
  • From: Philippe & Geertrui Mollet-Cornelis <mollet.cornelis@ping.be>
• ATM IRT5.2.1
  • From: polaris@gsn.net
• ATM Re: Very Old Criterion Scope
  • From: psh@juno.com
• Re: ATM Binoculars at the PAWN SHOP
  • From: psh@juno.com
• Re: ATM - Digital Setting Circles
  • From: "R.Radhakrishnan" <krish@mcs.net>
• Re: ATM What is Beryllium?
  • From: "R.Radhakrishnan" <krish@mcs.net>
• ATM Re: atm-digest V1 #389
  • From: randyj@nwlink.com (Randy Johnson)
• ATM Re: 4.25 F5
  • From: randyj@nwlink.com (Randy Johnson)
• Re: ATM Heating your pitch
  • From: Randy Johnson <randyj@nwlink.com>
• Re: ATM Re: 4.25" Wing-nut idea...
  • From: Randy Johnson <randyj@nwlink.com>
• ATM Re: MM5369 IC
  • From: Randy Johnson <randyj@nwlink.com>
• ATM Bowling Ball Mount
  • From: Randy Johnson <randyj@nwlink.com>
• ATM UO Mirror Mount Design
  • From: "Rex Klopfenstein, Jr" <rklopfen@wcnet.org>
• ATM-Mirror Grinding Class - Toledo, OH area
  • From: "Rex Klopfenstein, Jr" <rklopfen@wcnet.org>
• ATM - Digital Setting Circles
  • From: "Rex Klopfenstein, Jr" <rklopfen@wcnet.org>
• Re: New ATM trilogy
  • From: "Rex Klopfenstein, Jr" <rklopfen@wcnet.org>
• Re: ATM Eq Platforms
  • From: "Rex Klopfenstein, Jr" <rklopfen@wcnet.org>
• ATM Drive Corrector-construction plans
  • From: "Rex Klopfenstein, Jr" <rklopfen@wcnet.org>
• Re: ATM Mirror Mounting - Think Tank
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM Pitch lap question!
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM mirror polish
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM mirror polish (fwd)
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM paper polishing pads
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM Optical Simulation SW?
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM Optical Simulation SW?-correctiom
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM figuring with screw
  • From: ab866@freenet.durham.org (ric rokosz)
• ATM Corrector Plate Fabrication
  • From: ab866@freenet.durham.org (ric rokosz)
• ATM What is Beryllium?
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM 8" mirror questions - weight, good sources, mirror cells?
  • From: ab866@freenet.durham.org (ric rokosz)
• Re: ATM 8" mirror questions - weight, good sources, mirror cells?-reply
  • From: ab866@freenet.durham.org (ric rokosz)
• Binox; grateful beginning ATMer.
  • From: Richard Edwards <redwards@writestuff.com>
• Re: ATM parr correctors
  • From: "Richard Keppler" <rkeppler@spots.ab.ca>
• Re: ATM silicone adhesive
  • From: "Richard Keppler" <rkeppler@spots.ab.ca>
• Re: ATM Enhanced Coatings.
  • From: "Richard Keppler" <rkeppler@spots.ab.ca>
• Re: ATM Front End Tube weight.
  • From: "Richard Keppler" <rkeppler@spots.ab.ca>
• Re: ATM Mylar windows
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Re: Secondary Size and Diameter of fully illuminated
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM edge bevelling and tiny cracks
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: Re[2]: ATM Pop Goes the Tool
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Re: Secondary Size and Diameter of fully illuminated
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Complete Computerized CCD telescope resources?
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Re: 4.25" Wing-nut idea...
  • From: Richard Schwartz <richas@chelsea.ios.com>
• ATM Re:
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Chemistry of silvering
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM "exotic" mirror materials
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Collodion
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Figuring with machine.
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Corrector Plate Fabrication
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM Willman-Bell Phone System...
  • From: Richard Schwartz <richas@chelsea.ios.com>
• Re: ATM book 1 Question, Curve Fitting, and yer Eyeballz
  • From: Richard Schwartz <richas@chelsea.ios.com>
• ATM collimating etc.
  • From: ras@well.com (Richard Soennichsen)
• ATM Am I Nuts?
  • From: "Richard Soennichsen" <ras@well.com>
• ATM paper polishing pads
  • From: "Richard Soennichsen" <ras@well.com>
• ATM Very Old Criterion Scope
  • From: "Richard Soennichsen" <ras@well.com>
• ATM Spider Diffraction
  • From: Richard Wagner <wagnerr@aesott.am.doe.ca>
• ATM Re: stepper circuit
  • From: Rick Stevenson <rick@stallion.oz.au>
• ATM Re: stepper circuit
  • From: Rick Stevenson <rick@stallion.oz.au>
• Re: ATM Experience in solar filter for amateurs
  • From: rhill@lpl.arizona.edu (Rik Hill)
• Re: ATM Cassegrain
  • From: rhill@lpl.arizona.edu (Rik Hill)
• Re: ATM Re: Very Old Criterion Scope
  • From: rhill@lpl.arizona.edu (Rik Hill)
• ATM Optical Simulation SW?
  • From: "Rob O'Toole" <otoole@hpanvs.an.hp.com>
• ATM Polishing/Figuring with Rouge vs. CeO
  • From: "Rob O'Toole" <otoole@hpanvs.an.hp.com>
• Re: ATM sites of interest around San Jose, CA
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: ATM Re: RFT wrinkles
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: ATM Collimating tool
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: ATM Chipped Lap.
  • From: Robert Duvall <rduvall@pixworks.com>
• Re: ATM - Where to buy mirror blanks, grit etc.
  • From: Robert Duvall <rduvall@pixworks.com>
• ATM Null Tests
  • From: Robert Katz <bert@atlas.co.uk>
• Re: ATM Optical suppliers in Pittsburgh,PA area
  • From: Rodger Petersen <faintfuzzy@worldnet.att.net>
• ATM Grinding Questions
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM Trepanning (long post!)
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM Houghton Telescopes
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM Re: Willman-Bell difficulties
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM Beginner's Optics
  • From: "Roger L. Davis" <rdavis@muskingum.edu>
• ATM M-57 visibility
  • From: rsinnott@skypub.com
• Re: ATM Heating your pitch
  • From: rsinnott@skypub.com
• New ATM trilogy
  • From: rudy@cae.ca (Rudy Taraschi)
• ATM C8 Paint Job
  • From: rudy@cae.ca (Rudy Taraschi)
• ATM Hello and a request for help
  • From: Sam McCarter <mccarter.7@osu.edu>
• ATM Re: Enhanced coatings
  • From: Sandra Barta <sbarta@pinc.com>
• Re: ATM Enhanced Coatings.
  • From: santryl@cadvision.com
• Re: ATM Enhanced Coatings.
  • From: santryl@cadvision.com
• Re: ATM Am I Nuts?
  • From: santryl@cadvision.com
• Re: ATM Protecting 7805 Regulators
  • From: santryl@cadvision.com
• Re: ATM Re: stepper circuit
  • From: santryl@cadvision.com
• Re: ATM Re: stepper circuit
  • From: santryl@cadvision.com
• Re: ATM What is Beryllium?
  • From: santryl@cadvision.com
• Re: ATM Binoculars at the PAWN SHOP
  • From: santryl@cadvision.com
• Re: ATM 8" mirror questions - weight, good sources, mirror cells?
  • From: santryl@cadvision.com
• Re: ATM Binoculars-Pawn... junk vs: quality?
  • From: santryl@cadvision.com
• Re: ATM Binoculars at the PAWN SHOP
  • From: santryl@cadvision.com
• Re[2]: ATM Re: Mirror grinding worktable.
  • From: scott@berfield.xo.com (Scott Berfield)
• ATM material sources
  • From: scott@berfield.xo.com (Scott Berfield)
• ATM edmund foucault tester
  • From: scott@berfield.xo.com (Scott Berfield)
• ATM Sleeks
  • From: sdilling@ford.com (Stephen Dillinger)
• Re: ATM the true price of home grown optics
  • From: sdilling@ford.com (Stephen Dillinger)
• Re: ATM Best lap-making methods
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM re: atm-digest V1 #367
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM UK Computer Dobs?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Best lap-making methods
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM size of spiders
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM UK Computer Dobs?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM UK Computer Dobs?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM UK Computer Dobs?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Chipped Lap.
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Presentation and Equatorial Plattforms.
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Suggest motor for barndoor mount?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Neale Howard's text, others
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Stepper Motor Woes
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Resource
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM M-57 visibility
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Optical Simulation SW?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Radius of Curvature! ACK!
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Secondary Mounting
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM stepper circuit
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM stepper circuit
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Re: stepper circuit
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• ATM Scotch Mount -- corrections
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Refractors
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Refractors
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Bowling Ball Mount
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• UK ATM supplies
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Binoculars at the PAWN SHOP
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM - Where to buy mirror blanks, grit etc.
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM 8" mirror questions - weight, good sources, mirror cells?
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Binoculars at the PAWN SHOP
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Binoculars-Different coatings explained-
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Binoculars-Different coatings explained-
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM book 1 Question
  • From: Stephen Tonkin <astro@aegis1.demon.co.uk>
• Re: ATM Mylar windows
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• Re: ATM Mylar windows
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• ATM Cassegrain
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• ATM mirror polish
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• ATM: new web pages may be of interest
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• ATM Correcting Mirror using Resistors
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• ATM: Ross corrector spacings
  • From: Steve Lee <SL@AAOCBN1.AAO.GOV.AU>
• ATM Correcting Mirror using Resistors
  • From: Steve Scampini <scampini@hp-mpg.an.hp.com>
• RE: ATM Re: Stepper Motors Help
  • From: SSEITZ@midmark.com (Steve Seitz)
• ATM Transporting Telescopes
  • From: sspang@cpcnet.com (Steve Spangler)
• Re: ATM edge bevelling
  • From: steve@wostx.com (Steve Strickland)
• ATM Intro - 16" Rutten Maksutov
  • From: squiress@gnn.com (Stewart Squires)
• Re: ATM "exotic" mirror materials
  • From: squiress@gnn.com (Stewart Squires)
• Re: ATM Schmidt vs. Houghton
  • From: squiress@gnn.com (Stewart Squires)
• ATM Pitch Laps
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Router Bits
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Secondary Mounting
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Secondary Mounting
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Secondary Mounting
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Drill Core
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Phenolic Tube
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM Sonotube
  • From: Sue&Alan French <72724.2270@compuserve.com>
• ATM eq. platform kit
  • From: sumner & birkmann <sumbir@is.usmo.com>
• ATM adaptive optics
  • From: sumner & birkmann <sumbir@is.usmo.com>
• Re: ATM Very Old Criterion Scope
  • From: thager@pcnet.com (Tim Hager)
• ATM Re: Stepper Motors Help
  • From: Tim Poulsen <Tim_Poulsen@zd.com>
• Re: ATM accuracy of centering primary mirro
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• Re: ATM Am I Nuts?
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• Re: ATM Re: stepper circuit
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• Re: ATM Re: stepper circuit
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• Re: ATM Correcting Mirror using Resistors
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• Re: ATM Binoculars at the PAWN SHOP
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• ATM Non-standard grinding machine
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Re: Stepper motor woes
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Re: Orion MAK-500
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Re: Bipolar stepper controller chip suggestions
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Troubleshooting electronics
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM - Digital Setting Circles
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: Dob/EQ scope design for ATM group?
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM 1st mirror, polishing for 2+ hours :-)
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM: Ross corrector spacings
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Subject: Re: ATM Binoculars
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM: Ross corrector spacings
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM trichloorethyleen
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM trichloorethyleen
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Best lap-making methods
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Pitch lap question!
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Best lap-making methods
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Best lap-making methods
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Steppers and Reducer for Mel's Dob Drive
  • From: Tom.Stock@gsbsc.gensig.com
• ATM in CO?
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Spider Diffraction
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Pop Goes the Tool
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Re: Stepper motors
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Am I Nuts?
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Radius of Curvature! ACK!
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM edmund foucault tester
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Heating your pitch
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Stepper Motors Help
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Secondary Mounting
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission fr
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Re: <no subject>
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Refractors
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Mak corrector plate
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Correcting Mirror using Resistors
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Refractors
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Re: Stepper Motors Help
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Binoculars at the PAWN SHOP
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Binoculars at the PAWN SHOP
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM beryllium redux
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Re: Very Old Criterion Scope
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Re: Mirror grinding worktable.
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM f/D=6 why??
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM silicone adhesive
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM trichloorethyleen
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• ATM Best lap-making methods
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM RFT wrinkles
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• ATM Lap-making redux
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [et@ugcs.caltech.edu (Ernest S. Tomlinson)]]
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• ATM Rouge stains
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• ATM Neale Howard's text, others
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• ATM More knife-edge tester stuff
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM flats (not M57)
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Kurt Hillig <khillig@Chem.LSA.umich.edu>]]
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• ATM Dall, Ross null tests
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM Dall, Ross null tests
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM Dall, Ross null tests
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• ATM Chemistry of silvering
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM Chemistry of silvering
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM Collodion
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM Flats
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM Collodion
  • From: tomlinson <etomlins@rohan.sdsu.edu>
• Re: ATM Mirror Blanks
  • From: "Tony Cecce, Corning, NY" <CECCE_AJ@corning.com>
• ATM Abrasives/Polishing
  • From: cohocoal@whidbey.net (TP&G Keohane)
• ATM Grit/polish
  • From: cohocoal@whidbey.net (TP&G Keohane)
• ATM Observatory BLDG designs?
  • From: tpuckett <tpuckett@mindspring.com>
• Re: ATM Sub diameter Tools
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• ATM Finding a friend
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• ATM The ISO MEETING IN GERMANY
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM paper polishing pads
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• ATM M-57visability
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM M57 central star visibility
  • From: goffaxe@azstarnet.COM (Valerie & Bob Goff)
• Re: ATM High school astronomy project
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• ATM Wing-nut idea...Roark's Formula
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• RE: ATM Dial indicator on mirror
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• RE: ATM Dial indicator on mirror
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM evaluation of a surface
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Re: 4.25" Wing-nut idea...
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM "exotic" mirror materials
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM "exotic" mirror materials
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Refractors
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM f/D=6 why??
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• ATM Automatic Solar tracker
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [btk@ix.netcom.com (Bill Marriott )]]
  • From: goffaxe@azstarnet.com (Valerie & Bob Goff)
• Re: ATM Re: No Local Help
  • From: Wil Milan <wmilan@airdigital.com>
• Re: ATM Refractors
  • From: Wil Milan <wmilan@airdigital.com>
• Re: ATM The Little Astrograph That Isn't
  • From: Wil Milan <wmilan@airdigital.com>
• Re: Re: ATM RFT wrinkles (fwd)
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM pitch lap making methods
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM evaluation of a surface
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM zerodur et al.
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM for dave and the macheads
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>
• ATM distortion correctors
  • From: Wolfgang Birkfellner <birkfell@merlin.pap.univie.ac.at>