[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

(ATM) Secondary Fab/Conic Sections/Bill's Compound Scope

To: btk@ix.netcom.com
Subject: (ATM) Secondary Fab/Conic Sections/Bill's Compound Scope
From: Lou Sanchez-Chopitea <lou.sanchez-chopitea@xilinx.com>
Date: Wed, 11 Oct 1995 09:40:10 -0700
Cc: atm@efn.org
In-Reply-To: Bill Marriott 's message of Tue, 10 Oct 1995 22:13:19 -0700 <199510110513.WAA27590@ix3.ix.netcom.com>

Hi,
        What determines the shape of a conic section are the central radius
of curvature and the conic constant. If you get these right then the mirror
will work. An advantage of edging is that you can precisely center the
surface if you get a little off. How are you testing surface figure?

                                    Cheers

                                            Lou

Lou Sanchez-Chopitea                EMail:  lou.sanchez-chopitea@xilinx.com
Senior Software Engineer            SnailMail:  2100 Logic Drive
SpeakMail: (408) 879-5059                       San Jose, CA 95124
FaxMail: (408) 377-4790             #include <disclaimer.h>

References:
- (ATM) Secondary Fab/Conic Sections/Bill's Compound Scope
  - From: btk@ix.netcom.com (Bill Marriott )

Prev by Author: (ATM) Cheap Clock Drive
Next by Author: (ATM) What to do with .......
Prev by thread: (ATM) Secondary Fab/Conic Sections/Bill's Compound Scope
Next by thread: (ATM) Secondary Fab/Conic Sections/Bill's Compound Scope
Index(es):
- Author
- Thread