Re: [ATM] more on plop output

["Nils Olof Carlin" <nilsolof.carlin@telia.com>]

One thing you can use the color plot for:
watch the blue dots - if the inner ones are clearly more prominent than the 
outer ones, it might be a good idea to try variable loads (of course fixed 
on one circle). This way you reduce the load slightly on the points 
supporting the thinner parts of the mirror, and the RMS error will be 
reduced. Not by much, though, and perhaps not enough to bother about.

Nils Olof
>> when one runs plop and is looking at the color plot, what, actually,
> is
>> the actual desired outcome? 

_______________________________________________
ATM mailing list http://www.atmlist.net/