Re: [ATM] Infrared Scope Design II

[Dominic-Luc Webb <dlwebb@canit.se>]

Great point, Bob! This is news to me.

I work near a very well stocked camera shop. Any chance you or
someone else in here know some specific brands/models?

Dominic

On Sun, 14 Oct 2007, Bob May wrote:

> Please note that full consumer cameras have these coatings.
> Scientific grade CCDs don't have the additional coatings and are
> actually CCD chips rather than the CMOS process that
> commercial/consumer cameras are.
> On the good side tho is that some cameras have the coating off of
> the chip and in the lens array which you will need to remove
> anyway so look for the odd flat piece in the lens assy to see if
> that is the IR filter.  It is coated on one side with a really
> visible coating.
> Bob May
> Due to the large volume of SPAM thaat I'm getting, add an open
> square bracket to the subject line or my spam filter will reject
> your post~
> rmay at nethere.com
> http: slash /nav.to slash bobmay
> http: slash /bobmay dot astronomy.net
> Replace the obvious words with the proper character.
>
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
>

_______________________________________________
ATM mailing list http://www.atmlist.net/