Re: [ATM] PLOP parts

["Jan van Gastel" <jhm.vangastel@wanadoo.nl>]

Did you rotate the part in PLOP Mike? I used graphical PLOP yesterday to
design a cell for a 25 incher and it on the picture it was laying on one of
its equilateral sides. After rotation it was laying on its base.

Jan
http://home.wanadoo.nl/jhm.vangastel/Astronomy/

----- Original Message ----- 
From: "Mike Lockwood" <melockwo@uiuc.edu>
To: "ATMList" <atm@atmlist.net>
Sent: Wednesday, October 25, 2006 11:36 PM
Subject: [ATM] PLOP parts


> Hi,
>
> A friend of mine was using graphical PLOP to design a cell, and the
> traingular parts came out close to equilateral triangles, but not
> quite.  We were unable to decide which way the part was meant to be
> rotated or which triangle was being shown.  There are no angles or
> locations shown for reference.
>
> Can anyone clear this up?  (Yes, I know I can email David Lewis, but I
> thought this might be beneficial to others on the list.)  We couldn't
> find anything in the help file, and I've wondered about this before.
>
> Seems like a simple dot on the cell diagram and on the part schematic
> would clear up any confusion.
>
> Mike Lockwood
>
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
>

_______________________________________________
ATM mailing list http://www.atmlist.net/