Re: [ATM] PLOP parts

["Olivier Biot" <olivier.biot@gmail.com>]

Mike,

if you use RTV blobs for attaching the primary to the triangles, I
don't expect lots of trouble with incorrectly oriented, almost
equilateral triangles. The size of the blob probably compensates for a
considerable amount of "error"...

Just my 2 cents...

Cheers!

Olivier

On 10/25/06, Mike Lockwood <melockwo@uiuc.edu> wrote:
> Hi,
>
> A friend of mine was using graphical PLOP to design a cell, and the
> traingular parts came out close to equilateral triangles, but not
> quite.  We were unable to decide which way the part was meant to be
> rotated or which triangle was being shown.  There are no angles or
> locations shown for reference.
>
> Can anyone clear this up?  (Yes, I know I can email David Lewis, but I
> thought this might be beneficial to others on the list.)  We couldn't
> find anything in the help file, and I've wondered about this before.
>
> Seems like a simple dot on the cell diagram and on the part schematic
> would clear up any confusion.
>
>        Mike Lockwood
>
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
>
_______________________________________________
ATM mailing list http://www.atmlist.net/