Re: [ATM] Venting Holes in a solid OTA

["Bob May" <bobmay@nethere.com>]

Masking tape won't compress the glue joint and press the glue
into the wood further much less take up the high spots of the
glue application.  You need the stretchiness of the rubber.  The
stretch wrap that Micheal is thinking about could be used but I'd
suspect that it won't really do much to compress the joint
together.
Remember that the less glue that there is between the two pieces
of wood, the stronger the joint is.  You attain that by clamping
the two pieces together rather than a sparse application of the
glue.
Bob May
bobmay at nethere.com
http: slash /nav.to slash bobmay
http: slash /bobmay dot astronomy.net
Replace the obvious words with the proper character.

_______________________________________________
ATM mailing list http://www.atmlist.net/