[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] glued aluminium mirror cell update

To: <atm@atmlist.net>, "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
Subject: Re: [ATM] glued aluminium mirror cell update
From: "ks1u" <ks1u@prodigy.net>
Date: Mon, 17 Oct 2005 11:22:42 -0400
List-Archive: <http://www.atmlist.net/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <6.0.3.0.0.20051017103757.01fa1d40@mail.dreamscopes.com>
Sender: atm-bounces@atmlist.net

This is more of a question than suggestion:  Is there any advantage to 
adding powdered aluminum to the epoxy mixture prior to mixing?

George 

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] glued aluminium mirror cell update
  - From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>

Prev by Author: Re: [ATM] Stripping to re-figure?
Next by Author: DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
Prev by thread: [ATM] glued aluminium mirror cell update
Next by thread: Re: [ATM] glued aluminium mirror cell update
Index(es):
- Author
- Thread