Re: [ATM] working with pitch

["Tom Moulton" <tom@moulton.us>]

> David,
> My heat gun, which I use for monokoting my RC planes,
> works great for this purpose. That's assuming the mass
> of pitch you're moving around is small. If the lap is
> really far from contact, submerging the lap in a
> bucket of warm/hot water is hard to beat.
> HTH,
> Dave

Warm/Hot water submersion works well because you also need to
heat up the tool along with the pitch so when pressing
the pitch will have time to flow.

Tom


_______________________________________________
ATM mailing list http://www.atmlist.net/