[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Off-centered Mirrors?

To: <atm@atmlist.net>
Subject: Re: [ATM] Off-centered Mirrors?
From: "lafotec" <lafotec@thewaynet.com.br>
Date: Sun, 24 Oct 2004 12:44:20 -0200
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <000701c4b992$e21f91a0$6601a8c0@attbi.com>
Sender: atm-bounces@atmlist.net

----- Original Message ----- 
From: "Greg Jones" <gregj888@comcast.net>
To: <atm@atmlist.net>
Sent: Sunday, October 24, 2004 4:29 AM
Subject: Re: [ATM] Off-centered Mirrors?

Hi:

Or cut mirror segments a little larger than the final diameter and
edging/centering it to final dimension, like is done in every lens or mass
producted mirrors.
Laercio.

> Of course you have to mask off the edge.
> Greg

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- Re: [ATM] Off-centered Mirrors?
  - From: "Greg Jones" <gregj888@comcast.net>

Prev by Author: Re: [ATM] how to use the foucault tester
Next by Author: [ATM] infrared filters using film
Prev by thread: RE: [ATM] Off-centered Mirrors?
Next by thread: RE: [ATM] Off-centered Mirrors?
Index(es):
- Author
- Thread