[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: [ATM] Mirror cell advice

To: <atm@atmlist.net>
Subject: RE: [ATM] Mirror cell advice
From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
Date: Thu, 21 Oct 2004 12:57:30 -0500
Importance: Normal
In-Reply-To: <000001c4b795$d4c30fe0$944d0750@the9fwt2ija8de>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net



Darran asked:

It's a 10inch f6.4 but is only 1 inch think. Being as it's on the thin
side, will this require a floatation cell, or can I get away with a
Berry style wooden disk and three blobs of silicon adhesive?

My response:
Everything I have seen says you need at least 9 points of support for a 10
inch mirror.

Jerry Reddell
Lubbock, Tx


_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] Mirror cell advice
  - From: "Darran Summerfield" <darran.summerfield@ntlworld.com>

Prev by Author: Re: [ATM] working with pitch
Next by Author: RE: [ATM] Off-centered Mirrors?
Prev by thread: [ATM] Mirror cell advice
Next by thread: Re: [ATM] Mirror cell advice
Index(es):
- Author
- Thread