[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] Flat black reflectivity spec

To: atm@atmlist.net
Subject: [ATM] Flat black reflectivity spec
From: John Lynch <john_p_lynch2004@yahoo.com>
Date: Wed, 20 Oct 2004 13:57:10 -0700 (PDT)
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

To the ATM group:

Today I found out that the reflectivity of the OPEX
dead flat black lacquer is 2%.  Is that good, bad
or ugly?

John Lynch


		

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Flat black reflectivity spec
  - From: "Jim Miller" <jim@jtmiller.com>

Prev by Author: [ATM] Old question regarding flat black
Next by Author: Re: [ATM] RE: RTV Silicone question
Prev by thread: Re: [ATM] Flat black paint question
Next by thread: Re: [ATM] Flat black reflectivity spec
Index(es):
- Author
- Thread