[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] RE: RTV Silicone question

To: "Mark Holm" <mdholm@telerama.com>, "ATM Mailing List" <atm@atmlist.net>
Subject: Re: [ATM] RE: RTV Silicone question
From: "Jim Miller" <jim@jtmiller.com>
Date: Sat, 2 Oct 2004 07:45:37 -0400
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <415E75AB.8040807@telerama.com>
Reply-To: Jim Miller <jim@jtmiller.com>
Sender: atm-bounces@atmlist.net

dow 832 has been recommended by bruce sayre. i have a tube here to fix my 
"cross country upside down" primary that i haven't used yet. got it from 
www.mcmaster.com for about $10 including shipping.

it's a one part, caulking tube type dispenser so no mixing.

btw, this is an alcohol cure according to the datasheet. don't expect an 
acetic acid smell from this one.

jtm 

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- [ATM] Re: RTV Silicone question
  - From: "Don Clement" <clement.focuser@verizon.net>
- Re: [ATM] RE: RTV Silicone or Silicone II?
  - From: Kevin Whitefire <chaosopher23@yahoo.com>

References:
- Re: [ATM] RE: RTV Silicone question
  - From: Mark Holm <mdholm@telerama.com>

Prev by Author: Re: [ATM] RE: RTV Silicone question
Next by Author: [ATM] Calibration Ideas for Dark Sky Meter (aDSM)
Prev by thread: Re: [ATM] RE: RTV Silicone question
Next by thread: [ATM] Re: RTV Silicone question
Index(es):
- Author
- Thread