[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM Dovetail dimensions

To: <atm@shore.net>
Subject: Re: ATM Dovetail dimensions
From: "Bob May" <bobmay@nethere.com>
Date: Sat, 6 Oct 2001 17:11:11 -0700
References: <F243n2Yf0scL9NtDEJm000048e8@hotmail.com>
Reply-To: "Bob May" <bobmay@nethere.com>
Sender: owner-atm@shore.net


There is no real standard for dovetails. What is common is the 60deg. and
the 45deg. cutters for metalworking.  The 60deg. is more of a flat end than
the 45deg. end.
Woodworking has a lot more sizes that are sort of standard - standard
because they are premade cutters more than anything else.
My suspicion is that the 60deg. is probably what Losmandy is using.
Bob May
http://nav.to/bobmay
bobmay@nethere.com
NEW! http://bobmay.astronomy.net

Follow-Ups:
- Re: ATM Dovetail dimensions
  - From: "Francis Milsom" <fmilsom@lineone.net>

References:
- ATM Dovetail dimensions
  - From: "Andre Yanoviak" <andre_y6@hotmail.com>

Prev by Author: Re: ATM grid dispenser
Next by Author: Re: A Schiefspiegler as first telescope (was Re: ATM 3-Vane or 4-Vane Spiders)
Prev by thread: ATM Dovetail dimensions
Next by thread: Re: ATM Dovetail dimensions
Index(es):
- Author
- Thread