Amateur Telescope Makers (ATM) Archive for OCT00 - by author
- Re: ATM ronchi mayday...
- From: "'rjf@skyhackers.org'" <rjf@skyhackers.org>
- Re: ATM ronchi mayday...
- From: "'rjf@skyhackers.org'" <rjf@skyhackers.org>
- RE: ATM Make Your Own Mirror Blank
- From: "(RIA) Durkin, Kenneth M" <k.durkin@state.gov>
- ATM Astatic mirror cell
- From: "Frédéric Géa" <geaf@unionfinancieredefrance.fr>
- ATM FeatureTouch focuser
- From: "Frédéric Géa" <geaf@unionfinancieredefrance.fr>
- Re: ATM Brandon 20mm Coma-Corrector
- From: Aart Olsen <aolsen@prairienet.org>
- Re: ATM Constructing with Small Aluminum Parts
- From: Adam Perkins <scopeguru@yahoo.com>
- Re: ATM New to list
- From: "Albert Highe" <ahighe@ix.netcom.com>
- Re: ATM comments on the Adler flexed-mirror design in current S&T?
- From: "Albert Highe" <ahighe@ix.netcom.com>
- Re: ATM Painting sides of mirror...
- From: "Albert Highe" <ahighe@ix.netcom.com>
- RE: ATM stupid mistake!!
- From: "Alsing, Paul" <palsing@harris.com>
- ATM Eypiece correlation to magnification
- From: "Andersen, Clark R." <clanders@utmb.edu>
- RE: ATM mirror eyepiece?
- From: "Andersen, Clark R." <clanders@utmb.edu>
- RE: Why not a Web-based ATM journal?
- From: "Andersen, Clark R." <clanders@utmb.edu>
- ATM Epoxy mirrors - a piece of the puzzle
- From: "Andersen, Clark R." <clanders@utmb.edu>
- RE: ATM Epoxy spin-cast mirrors: comments for experimenters
- From: "Andersen, Clark R." <clanders@utmb.edu>
- RE: ATM Epoxy spin-cast mirrors: comments for experimenters
- From: "Andersen, Clark R." <clanders@utmb.edu>
- RE: ATM New substance mirrors
- From: "Andersen, Clark R." <clanders@utmb.edu>
- RE: ATM Flexed mirrors
- From: "Andersen, Clark R." <clanders@utmb.edu>
- RE: ATM Flexed mirrors
- From: "Andersen, Clark R." <clanders@utmb.edu>
- Re: ATM Baffled about baffles
- From: "andy" <afmartyn@spin.net.au>
- Re: ATM Paracorr with F2.8 parabola
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM The Ideal Astronomy Truck
- From: Andy Saulietis <iss@pvtnetworks.net>
- RE: ATM Epoxy spin-cast mirrors: comments for experimenters
- From: Andy Saulietis <iss@pvtnetworks.net>
- RE: ATM Epoxy spin-cast mirrors: comments for experimenters
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Performance with Spherical Aberration
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM 24 inch
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM comments on the Adler flexed-mirror design in current S&T?
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Ellipsoidal mirror test
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Newtonian with a Tilted Secondary
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Newtonian with a Tilted Secondary (2 Mirror Folded Newtonian)
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM stupid mistake!!
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Painting sides of mirror...
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Starting grinding - Advice?
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Gugoloz 64 newbie question
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Focal length
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Copper Alloy Passivation
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Polishing help
- From: Anthony Stillman <atmer@flash.net>
- ATM Making a small dob
- Re: ATM designing an astrograf
- Re: ATM Which Carbo to start with
- Re: ATM Fiber light source - a burning issue
- Re: ATM stupid mistake!!
- ATM Sticky pitch
- From: Arjan te Marvelde <arjan.te.marvelde@hetnet.nl>
- RE: ATM Concrete moulds could be DANGEROUS
- From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
- RE: ATM Concrete moulds could be DANGEROUS
- From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
- RE: ATM Fiber light source - a burning issue
- From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
- Re: ATM 21" f/6 report: status and questions
- ATM Where to get a 4.5" diagonal
- Re: ATM Adler flexed-mirror
- From: AXE* <goffaxe@azstarnet.com>
- Re: ATM Filters
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: SV: ATM eyepiece focal length
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Hogging dilemma
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM publishing, was: flex mirror and...
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: Why not a Web-based ATM journal?
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM High Performance Refractor Design
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM commercial mirrors -- are they getting better or not?
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Re: Eyepiece selection
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Collimation -- how much effect?
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Tube material - definitive advice please
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM newbie with dumb question
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Brandon 20mm Coma-Corrector
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Eyepieces & Stuff
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Travel Scope size restrictions
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- ATM Cheap Collimation Tricks
- From: "Bell, Andrew" <AMB2@pge.com>
- ATM Anybody still have the sundial spreadsheet
- From: "Bill Bass" <bbass@lds.net>
- Re: ONLINE ATMJ
- From: "Bill Cook" <atmj1@conceptsnet.com>
- Re: Online ATMJ
- From: "Bill Cook" <atmj1@conceptsnet.com>
- ATM Re: 10x80 collimation
- From: "Bill Cook" <atmj1@conceptsnet.com>
- Re: ATM Clear Mylar?
- From: "Bill Cotten" <billsas@worldnet.att.net>
- Re: ATM Clear Mylar?
- From: "Bill Cotten" <billsas@worldnet.att.net>
- ATM Refractor designing
- From: Bill Marriott <btk@pacbell.net>
- Re: ATM secondary thickness
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM focal legnth ..?
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM Mirrors - cleaning fluids
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM 21" f/6 report: status and questions
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM 21" f/6 report: status and questions
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM 21" f/6 report: status and questions
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Update on Grinder
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Eyepiece Selection
- From: "Bill T." <twentiethwave@hotmail.com>
- ATM Spin Casting Experiments
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Battery information
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Star testing with a smaller secondary
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM pitch lap problem (?)
- From: "Bill T." <twentiethwave@hotmail.com>
- ATM Trying to make a Spherical Surace and It's NOT WORKING!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM stupid mistake!!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM : Foucault Request
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM proper grinding
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM pitch lap problem (?)
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM WOOHOO!!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Trying to make a Spherical Surace
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM secondary position
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Constructing with Small Aluminum Parts
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM newbie with dumb question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 8" f3.8 -- Worthy project?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM electronics question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Polishing help
- From: "Bob May" <bobmay@nethere.com>
- Re: Re[2]: ATM 8" f3.8 -- Worthy project?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM help me interpret my focal length tests
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM polishing help
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Third time unlucky....
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM What kind of edge?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Focault tester dimensions questions
- From: "Bob May" <bobmay@nethere.com>
- Re: Re[2]: ATM 8" f3.8 -- Worthy project?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Crayford focuser question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Crayford focuser question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Focault LED is 2 volt. Batteries deliver 3 volts.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Down and dirty mirror stand ideas needed.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Figuring Stroke Question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Push glass / Lose Weight
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM TDE
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Third time unlucky....
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Figuring Stroke Question >>> In simple English :-)
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Breaking an Achromat
- From: "Bob May" <bobmay@nethere.com>
- ATM Re: About that Foucault tester
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM A Different Figuring Question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM fine grit & simple stands
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Alt Balance and Eyepieces
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Coma Correctors (was 8" f3.8 -- Worthy project)
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Date: Sun, 29 Oct 2000 12:44:45 -0800
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Schiefspiegler - looking for very basic advice/info
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Site with photos of Focault images needed
- From: "Bob May" <bobmay@nethere.com>
- Re: Re[4]: ATM 8" f3.8 -- Worthy project?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM A question on Metal tool design........
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Anybody still have the sundial spreadsheet
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Coma Correctors (was 8" f3.8 -- Worthy project)
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Focault scale for 18 threads/inch?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Commerical mirrors (again), etc.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM A question on Metal tool design........
- From: "Bob May" <bobmay@nethere.com>
- ATM DSC
- From: Brad <brad@escapees.com>
- Re: ATM Fiber light source - a burning issue
- From: Brad <brad@escapees.com>
- Re: ATM Concrete moulds could be DANGEROUS
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Concrete moulds could be DANGEROUS
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Concrete moulds could be DANGEROUS
- From: Brad Davy <bdavy@fred.net>
- ATM Battery information
- From: Brad Davy <bdavy@fred.net>
- RE: ATM Flexed mirrors
- From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
- Re: ATM Coma Correctors (was 8" f3.8 -- Worthy project)
- From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
- Re: ATM Welding
- From: Brian Nestel <blast@aloha.net>
- Re: ATM machine tool questions
- From: "Brian S. Boothman" <bboothman@unitedmold.com>
- ATM designing an astrograf
- ATM Hogging dilemma
- From: "Charles Taylor" <Chucktaylor3@Integrityol.Com>
- Re: ONLINE ATMJ
- From: "Charles Taylor" <Chucktaylor3@Integrityol.Com>
- Re: ATM Un-"dewing" Secondary Color
- From: "Charles Taylor" <Chucktaylor3@Integrityol.Com>
- ATM Making Reticle Eyepieces
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- ATM Greensand
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATM Battery information
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATM Tube material - definitive advice please
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATM Nose Heavy or Tail Heavy?
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- ATM Crayford opinions wanted
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Crayford opinions wanted
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Re: Crayford opinions wanted
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ONLINE ATMJ
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Eyepiece Selection
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Virus problems
- From: "Chuck Hards" <chuckh@companionsystems.com>
- RE: ATM New substance mirrors
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM New substance mirrors
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM New substance mirrors
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Welding
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Welding
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Frankenstein & Sorbothane
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Frankenstein and Sorbothane
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Eyepieces & Stuff
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Eyepieces & Stuff
- From: "Chuck Hards" <chuckh@companionsystems.com>
- RE:ATM machine tool questions
- ATM Copper Alloy Passivation
- ATM Tube material - definitive advice please
- From: "Clive Beale" <happysceptic@freeuk.com>
- ATM Not the poor Man's collimator
- From: Clive Milne <milnecd@yahoo.com>
- ATM Secondary de-center
- From: Clive Milne <milnecd@yahoo.com>
- ATM Aluminium optical substrates.
- From: Clive Milne <milnecd@yahoo.com>
- ATM Computer controlled figuring
- From: Clive Milne <milnecd@yahoo.com>
- ATM Re- Computer controlled figuring (CCF)
- From: Clive Milne <milnecd@yahoo.com>
- RE: ATM secondary thickness
- From: Colin Caissie <optic@gwi.net>
- Re: ATM Air Spaced lens
- From: Colin Caissie <optic@gwi.net>
- Re: ATM Correction to That Darned Diffraction Ring
- From: Colin Caissie <optic@gwi.net>
- Re: ATM Where can I buy a Telrad?
- From: Colin Caissie <optic@gwi.net>
- Re: ATM pitch lap netting
- From: Colin Caissie <optic@gwi.net>
- Re: ATM Refractor designing
- From: Colin Caissie <optic@gwi.net>
- ATM refractor designing
- From: Colin Caissie <optic@gwi.net>
- Re: ATM Refractor designing
- From: Colin Caissie <optic@gwi.net>
- Re: ATM Push glass / Lose Weight
- From: Colin Caissie <optic@gwi.net>
- ATM Re: Eyepiece selection
- From: "Colin Harris" <colinharris4@compuserve.com>
- Re: ATM comments on the Adler flexed-mirror design in current S&T?
- From: Craig Utter <cmutter@bellatlantic.net>
- Re: ATM Clear Mylar?
- From: Craig Utter <cmutter@bellatlantic.net>
- Re: ATM Eyepieces & Stuff
- From: Craig Utter <cmutter@bellatlantic.net>
- Re: ATM Recoating/refiguring mirror
- From: Curt Wittenberg <curtw@scripps.edu>
- Re: ATM Where can I buy a Telrad?
- From: "D & D" <d3stars@teleport.com>
- Re: ATM BVC Mirror Blank? - Berry Kriege book
- From: "Damian Kruger" <djkruger@mpx.com.au>
- Re: Grit application - Re: ATM Video.
- From: Dan Cassaro <dcass@mediaone.net>
- ATM : Making and mounting newtonian diagonals
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Crayford focuser question
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Alt Balance and Eyepieces
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Flexed mirrors
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM Flexed mirrors
- From: Daniel Kahraman <ishtar66@primus.ca>
- Re: ATM Where can I buy a Telrad?
- From: "Dave Bevel" <davebevel@mindspring.com>
- ATM Gamma ray burst and amateur astromers
- From: "Dave Bevel" <davebevel@mindspring.com>
- ATM Digest Version?
- From: "Dave Burniston" <dburniston@sympatico.ca>
- ATM Starting grinding - Advice?
- From: "Dave Del Signore" <atm_list@narnia.toledo.oh.us>
- Re: ATM DSC
- From: "Dave Ek" <ekdave@earthlink.net>
- Re: ATM Constructing with Small Aluminum Parts
- From: Dave Gault <daveg@tpg.com.au>
- ATM Coma Correctors (was 8" f3.8 -- Worthy project)
- From: Dave Gault <daveg@tpg.com.au>
- ATM Classical Cass Collimation
- From: "Dave Gill" <dpgill@raex.com>
- Re: ATM Newtonian with a Tilted Secondary
- From: "Dave Pitou" <dpitou@ix.netcom.com>
- Re: ATM focal legnth ..?
- From: Dave Smith <smithers@ucla.edu>
- ATM Re: [scope-drive] wireless mise as control instruments
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM Epoxy mirrors - a piece of the puzzle
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM Adler flexed-mirror
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM New substance mirrors
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Silver Coatings
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Push glass / Lose Weight
- From: Dave Sopchak <dsopchak@mac.com>
- ATM WWII Binoculars
- From: "David M Groski" <David.M.Groski@usa.dupont.com>
- ATM Illumination
- From: "David S. Manuel, Jr." <dsmanuel@quixnet.net>
- ATM Lens Find?
- From: "David S. Manuel, Jr." <dsmanuel@quixnet.net>
- No Subject
- From: "david thomas" <badsun23@hotmail.com>
- RE: ATM Dual axis controller?
- From: "DBodie" <dbodie@telus.net>
- RE: ATM Dual axis controller?
- From: "DBodie" <dbodie@telus.net>
- ATM Re: David's Questions
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM grinding machine
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Concrete moulds could be DANGEROUS
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Update on Grinder
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Concrete moulds could be DANGEROUS
- From: Dennis Rech <dennisrech@home.com>
- Re: Online ATMJ
- From: Dennis Rech <dennisrech@home.com>
- Re: Online ATMJ
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Grinder speed question
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Focal length
- From: Dennis Rech <dennisrech@home.com>
- ATM DOB construction question
- From: Dennis Woos <wooscons@sover.net>
- Re: ATM DOB construction question
- From: Dennis Woos <wooscons@sover.net>
- ATM Crayford focuser question
- From: Dennis Woos <wooscons@sover.net>
- ATM messages
- From: "Dennis_Bishop"<starlord@QNET.COM>
- ATM First Light (sort of)
- From: "Depack, Ronald" <RDepack@howost.com>
- ATM What kind of edge?
- From: "Depack, Ronald" <RDepack@howost.com>
- RE: ATM Constructing with Small Aluminum Parts
- From: "Depack, Ronald" <RDepack@howost.com>
- Re: ATM Wooden CB245 housing?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Build your own aurora detector.
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM Re: Concrete moulds could be DANGEROUS
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM Re: Concrete moulds could be DANGEROUS
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Concrete moulds could be DANGEROUS
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Wooden CB245 housing?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM comments on the Adler flexed-mirror design in current S&T?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM concrete forms
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Concrete moulds could be DANGEROUS
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Concrete moulds could be DANGEROUS
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM flex mirror and publishing
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Which Carbo to start with
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM flex mirror and publishing
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: Why not a Web-based ATM journal?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Re: [scope-drive] wireless mise as control instruments
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Silver Coatings
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM workshops in Albequerque, Boston
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: RE[2]: ATM Flexed mirrors
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Focuser survey
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM Focuser in Light Path
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM Copper Alloy Passivation
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM Constructing with Small Aluminum Parts
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM Alt Balance and Eyepieces
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM Exact O.D. of 2" Eyepieces
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM Epoxy mirrors - a piece of the puzzle
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM Epoxy mirrors -Revision of scientific notation
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM Focuser survey
- From: Doug & Mikki Hudgins <hudginsclan@mindspring.com>
- Re: ATM Focuser survey
- From: Doug & Mikki Hudgins <hudginsclan@mindspring.com>
- Re: ATM Another poor man collimating
- From: doug kniffen <dk@usmo.com>
- Re: ATM Another poor man collimating
- From: doug kniffen <dk@usmo.com>
- Re: ATM Another poor man collimating
- From: doug kniffen <dk@usmo.com>
- Re: ATM Another poor man collimating
- From: doug kniffen <dk@usmo.com>
- Re: ATM Collimation
- From: doug kniffen <dk@usmo.com>
- Re: ATM Another poor man collimating
- From: doug kniffen <dk@usmo.com>
- Re: ATM Another poor man collimating
- From: doug kniffen <dk@usmo.com>
- Re: ATM Another poor man collimating
- From: doug kniffen <dk@usmo.com>
- Re: ATM Another poor man collimating
- From: doug kniffen <dk@usmo.com>
- Re: ATM Eyepiece Selection
- From: doug kniffen <dk@usmo.com>
- Re: ATM Re: Eyepiece selection
- From: doug kniffen <dk@usmo.com>
- Re: ATM Club newsletters
- From: doug kniffen <dk@usmo.com>
- Re: ATM Updated collimation page
- From: doug kniffen <dk@usmo.com>
- Re: ATM stupid mistake!!
- From: doug kniffen <dk@usmo.com>
- ATM Alt Balance and Eyepieces
- From: Doug Tanaka <dtanaka@seanet.com>
- RE: ATM Alt Balance and Eyepieces
- From: Doug Tanaka <dtanaka@seanet.com>
- RE: ATM Alt Balance and Eyepieces
- From: Doug Tanaka <dtanaka@seanet.com>
- ATM Astigmatism on my 16"
- From: "Douglas S Angle" <Douglas.S.Angle@can.dupont.com>
- ATM polishing help
- From: dt2319 <dt2319@netscapeonline.co.uk>
- ATM polishing help
- From: dt2319 <dt2319@netscapeonline.co.uk>
- Re: ATM polishing help
- From: dt2319 <dt2319@netscapeonline.co.uk>
- ATM secondary position
- From: dt2319 <dt2319@netscapeonline.co.uk>
- ATM Polishing help
- From: dt2319 <dt2319@netscapeonline.co.uk>
- ATM polishing help
- From: dt2319 <dt2319@netscapeonline.co.uk>
- ATM pitch lap netting
- From: "Duncan Radbourne" <duncan.radbourne@tesco.net>
- RE:- ATM Tom Waineo Mirror making Streaming Video
- From: "Dunk B." <Dunk@mad.scientist.com>
- Re: ATM Making Reticle Eyepieces
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM poor man's collimation
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Another poor man collimating
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM comments on the Adler flexed-mirror design in current S&T?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM focuser hole and secondary offset
- From: Dwight Elvey <elvey@hal.com>
- RE: ATM mirror eyepiece?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Wooden CB245 housing?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Cheap Collimation Tricks
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM hot motors
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Crayford opinions wanted
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Rejuvinating Battery
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Hogging dilemma
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Another poor man collimating
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Newtonian with a Tilted Secondary
- From: Dwight Elvey <elvey@hal.com>
- Re[3]: ATM Another poor man collimating
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Epoxy mirrors - a piece of the puzzle
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Re: 10x80 collimation
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Silver Coatings
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Fiber light source - a burning issue
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Star testing with a smaller secondary - off axis?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Illumination
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM stupid mistake!!
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Starting grinding - Advice?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Classical Cass Collimation
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Focal length
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Focal length
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Clear Mylar?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Classical Cass Collimation
- From: Dwight Elvey <elvey@hal.com>
- Re:ATM Classical Cass Collimation
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Classical Cass Collimation
- From: Dwight Elvey <elvey@hal.com>
- RE[2]: ATM DOB construction question
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM 8" f3.8 -- Worthy project?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Copper Alloy Passivation
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM 8" f3.8 -- Worthy project?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM electronics question
- From: Dwight Elvey <elvey@hal.com>
- Re[4]: ATM 8" f3.8 -- Worthy project?
- From: Dwight Elvey <elvey@hal.com>
- Re[4]: ATM 8" f3.8 -- Worthy project?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM 8" f3.8 -- Worthy project?
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Focault tester dimensions questions
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Focault tester dimensions questions
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM 8" f3.8 -- Worthy project?
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Focault tester dimensions questions
- From: Dwight Elvey <elvey@hal.com>
- Re[3]: ATM Focault tester dimensions questions
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM LED 9 volt substitution
- From: Dwight Elvey <elvey@hal.com>
- RE[2]: ATM Flexed mirrors
- From: Dwight Elvey <elvey@hal.com>
- Re[6]: ATM 8" f3.8 -- Worthy project?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Nose Heavy or Tail Heavy?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Focault scale for 18 threads/inch?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Eyepieces & Stuff
- From: Dwight Elvey <elvey@hal.com>
- ATM flexed mirrors
- From: Ed Cohen <ec@arcon.com>
- Re: Re[2]: ATM Crayford opinions wanted
- From: "Ed Erbeck Jr." <ed@crazyedoptical.com>
- Re: ATM aluminizing
- From: "Ed Erbeck Jr." <ed@crazyedoptical.com>
- Re: ATM stupid mistake!!
- From: "Ed Erbeck Jr." <ed@crazyedoptical.com>
- Re: ATM Magazine
- From: "Ed Erbeck Jr." <ed@crazyedoptical.com>
- ATM pitch lap netting
- From: Edwin Spector <ems@lucent.com>
- ATM OT: Cleaning Out
- From: "Fansler, David" <DFansler@TriPathImaging.com>
- Re: ATM Wooden CB245 housing?
- From: Frank Henriquez <frank@ucla.edu>
- Re: ATM Epoxy mirrors - a piece of the puzzle
- From: Frank Henriquez <frank@ucla.edu>
- Re: ATM New substance mirrors
- From: Frank Henriquez <frank@ucla.edu>
- RE: ATM Flexed mirrors
- From: Frank Henriquez <frank@ucla.edu>
- ATM Collimation
- Re: ATM WOOHOO!!
- From: "Garth van Sittert" <garth@mediasupplies.co.za>
- Re: ATM electronics question
- From: "Garth van Sittert" <garth@mediasupplies.co.za>
- Re: ATM Polishing help
- From: "Garth van Sittert" <garth@mediasupplies.co.za>
- ATM what to do with f3 blank?
- From: "Gary McKenzie" <garymck@optusnet.com.au>
- ATM flex mirror glue
- From: "Gary McKenzie" <garymck@optusnet.com.au>
- ATM Adler Responds to Flex Questions
- From: Gary Seronik <gseronik@skypub.com>
- Re: ATM flex mirror and publishing
- From: Gary Seronik <gseronik@skypub.com>
- Re: ATM flex mirror and publishing
- From: Gary Seronik <gseronik@skypub.com>
- Re: ATM Adler flexed-mirror - dumb question
- From: Gary Seronik <gseronik@skypub.com>
- Re: ATM Newtonian with a Tilted Secondary (2 Mirror Folded Newtonian)
- From: Gary Seronik <gseronik@skypub.com>
- Re: ATM Re: Flexed Mirror
- From: Gary Seronik <gseronik@skypub.com>
- Re: ATM Focault LED is 2 volt. Batteries deliver 3 volts.
- From: Gary Seronik <gseronik@skypub.com>
- Re: ATM Alt Balance and Eyepieces
- From: Gary Seronik <gseronik@skypub.com>
- Re: ATM Flexed mirrors
- From: Gary Seronik <gseronik@skypub.com>
- Re: ATM Flexed mirrors
- From: Gary Seronik <gseronik@skypub.com>
- Re: ATM Eyepieces & Stuff
- From: Gary Seronik <gseronik@skypub.com>
- Re: ATM Cutting Yazoo Mills tubes
- From: Gary Seronik <gseronik@skypub.com>
- ATM Air Spaced lens
- From: Gary Woodall <mandoman@ce.mediaone.net>
- Re: ATM Air Spaced lens
- From: Gary Woodall <mandoman@ce.mediaone.net>
- Re: ATM Official First Light on my Lurie-Houghton Telescope
- From: Gary Woodall <mandoman@ce.mediaone.net>
- ATM maker search.
- From: Gary Woodall <mandoman@ce.mediaone.net>
- [Fwd: ATM drive systems]
- From: Gary Woodall <mandoman@ce.mediaone.net>
- Re: ATM Re:Epoxy Mirrors
- From: Gary Woodall <mandoman@ce.mediaone.net>
- ATM Aluminum tubbing
- From: Gary Woodall <mandoman@ce.mediaone.net>
- Re: ATM Aluminum tubbing
- From: Gary Woodall <mandoman@ce.mediaone.net>
- Re: ATM Motor found...
- From: Gary Woods <gwoods@albany.net>
- Re: ATM Focuser in Light Path
- From: George Anderson <georgea@CAM.ORG>
- Re: ATM designing an astrograf
- From: "Giuseppe 'Pippo' Bianco" <giuseppe.bianco@asi.it>
- Re: ATM Eypiece correlation to magnification
- From: "Giuseppe 'Pippo' Bianco" <giuseppe.bianco@asi.it>
- ATM 24 inch Ultra Lite
- From: "Greg Babcock" <gregb@iccom.com>
- Re: ATM Filters
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Making a small dob
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM commercial mirrors -- are they getting better or not?
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM ccd's anybody?
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM commercial mirrors -- are they getting better or not?
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM commercial mirrors -- are they getting better or not?
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Fiber light source - a burning issue
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Fiber light source - a burning issue
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Flexing mirrors
- From: "Harold" <adams@rmci.net>
- ATM seeing conditions
- From: "Harold" <adams@rmci.net>
- RE: ATM Can you build a Telrad?
- From: Heapy Chris CG <Chris.Heapy@astrazeneca.com>
- RE: ATM OT Lathe stuff.
- From: Heapy Chris CG <Chris.Heapy@astrazeneca.com>
- RE: ATM Constructing with Small Aluminum Parts
- From: Heapy Chris CG <Chris.Heapy@astrazeneca.com>
- ATM RE: revelant lines
- From: Hennecke Marcus <Marcus.Hennecke@temic.com>
- ATM Atm- Glass fibers
- Re: ATM Star testing with a smaller secondary
- From: "Howard Banich" <hbanich@teleport.com>
- Re: ATM Frankenstein & Sorbothane
- From: "Howard Banich" <hbanich@teleport.com>
- Re: ATM 8" f3.8 -- Worthy project?
- From: "Howard Banich" <hbanich@teleport.com>
- ATM Reflectivity Testing
- From: Howard Clausing <hclaus@clausing.com>
- ATM Wooden CB245 housing?
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Barlow lens oddity
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- Re: ATM what to do with f3 blank?
- From: Hugues_Laroche@ses-astra.com
- Re: ATM off topic - CCD's
- From: Hugues_Laroche@ses-astra.com
- Re: ATM pitch lap netting
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Can you build a Telrad?
- From: Hugues_Laroche@ses-astra.com
- Re: ATM 21" f/6 report: status and questions
- From: Hugues_Laroche@ses-astra.com
- ATM Aluminium disk
- From: Hugues_Laroche@ses-astra.com
- Re: ATM stupid mistake!!
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Constructing with Small Aluminum Parts
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Constructing with Small Aluminum Parts
- From: Hugues_Laroche@ses-astra.com
- Re: ATM 21" f/6 - Status report and a question
- From: Hugues_Laroche@ses-astra.com
- Re: Re[2]: ATM 8" f3.8 -- Worthy project?
- From: Hugues_Laroche@ses-astra.com
- Re: Re[4]: ATM 8" f3.8 -- Worthy project?
- From: Hugues_Laroche@ses-astra.com
- RE: ATM Flexed mirrors
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Fiber light source - a burning issue
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM Fiber light source - a burning issue
- From: Ian Stirling <root@mauve.demon.co.uk>
- ATM concrete forms
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM concrete forms
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM motor temp
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM hot motors
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM drive systems
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM applying grit
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM Fwd: glass rods
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM word of caution
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM casting rubber mirror-holder
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM attaching small parts
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM fine grit & simple stands
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM Magazine
- ATM cassegrain secondary
- From: James Meenan <jmeenan@erols.com>
- ATM Gulgolz#73
- From: James Meenan <jmeenan@erols.com>
- Re: ATM Illumination
- From: "James O'Malley" <omalleyj@eclipse.net>
- Re: ATM Constructing with Small Aluminum Parts
- From: "James O'Malley" <omalleyj@eclipse.net>
- Re: ATM DOB construction question
- From: "James O'Malley" <omalleyj@eclipse.net>
- ATM Re: Lathe Stuff
- From: James P Crombie <jpcrombie@islandtelecom.com>
- Re: ATM Constructing with Small Aluminum Parts
- From: James P Crombie <jpcrombie@islandtelecom.com>
- Re: SV: ATM eyepiece focal length
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Astigmatism on my 16"
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM 8" f3.8 -- Worthy project?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Focault tester dimensions questions
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Figuring Stroke Question Oops ---Corrections---
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Breaking an Achromat
- From: Jan Bentz <jbentz@inreach.com>
- ATM Re: ... a larger secondary?... more info + which formula?
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM Mirrors - cleaning fluids
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM focuser hole and secondary offset
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM Large telescope question
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM Large telescope question
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM Location of Elevation Bearing Teflon ?
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM stupid mistake!!
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM Re: stupid mistake
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM electronics question
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM electronics question
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM Illumination
- From: Jan van Gastel <janvgastel@wish.net>
- ATM Re: atm-digest V1 #2335, Aluminum mirrors
- From: Jarvis Krumbein <jkoptic@juno.com>
- Re: ATM Alt Balance and Eyepieces
- From: Jay LeBlanc <jaleblan@dakotacom.net>
- Re: ATM Another poor man collimating
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Another poor man collimating
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Motor found...
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Hot motor!
- From: "Jeff Arnold" <scoper10@hotmail.com>
- RE: ATM 21" f/6 report: status and questions
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM 21" f/6 report: status and questions
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Another poor man collimating
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Hogging dilemma
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM machine tool questions
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Another poor man collimating
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Quick tip: Tracking pits during grinding
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM 21" f/6 report: status and questions
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Quick tip: Tracking pits during grinding
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Another poor man collimating
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM ronchi mayday...
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Another poor man collimating
- From: "Jeff Arnold" <scoper10@hotmail.com>
- RE: ATM New substance mirrors
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM New substance mirrors
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Flexed mirrors
- From: jeffmorgan@mindspring.com (Jeff Morgan)
- ATM Nose Heavy or Tail Heavy?
- From: jeffmorgan@mindspring.com (Jeff Morgan)
- ATM Diagonal
- From: "Jerome Jooste" <jeromej@icon.co.za>
- Re: ATM Eypiece correlation to magnification
- From: "Jerome Jooste" <jeromej@icon.co.za>
- Re: ATM Question about secondaries
- From: "Jerome Jooste" <jeromej@icon.co.za>
- ATM Grit size conversion
- From: "Jerome Jooste" <jeromej@icon.co.za>
- ATM subscription
- From: "Jerry Dove" <jdove1@earthlink.net>
- ATM Location of Elevation Bearing Teflon ?
- From: "Jim Dolson" <jdolson@iserv.net>
- Re: ATM Alt Balance and Eyepieces
- From: Jim Fitch <jf@arn.net>
- ATM Star testing with a smaller secondary
- From: "Jim Reid" <jimsci@bellsouth.net>
- Re: ATM Star testing with a smaller secondary - off axis?
- From: "Jim Reid" <jimsci@bellsouth.net>
- ATM Constructing with Small Aluminum Parts
- From: "Jim Reid" <jimsci@bellsouth.net>
- ATM Constructing with Small Aluminum Parts
- From: "Jim Reid" <jimsci@bellsouth.net>
- ATM Tom Waineo Mirror making Streaming Video
- From: "Jim Warner" <warners@bgcc.com>
- Re: ATM Tom Waineo Mirror making Streaming Video
- From: "Jim Warner" <warners@bgcc.com>
- RE: ATM Tom Waineo Mirror making Streaming Video NOW WORKING
- From: "Jim Warner" <warners@bgcc.com>
- RE: ATM Video.
- From: "Jim Warner" <warners@bgcc.com>
- ATM Welding Conduit
- From: Jimmy La Fountain <lafountainj@earthlink.net>
- Re: ATM Fiber light source - a burning issue
- From: Jimmy La Fountain <lafountainj@earthlink.net>
- Re: ATM Update on Grinder
- From: Jmkasunich@ra.rockwell.com
- ATM slightly off topic, but funny
- From: Joe campbell <joe@esper.com>
- ATM Club newsletters
- From: Joe Campbell <joe@esper.com>
- ATMers Website
- From: Joe campbell <joe@esper.com>
- Re: ATM Adler flexed-mirror - dumb question
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM free glass...?
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Flex Program.
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Epoxy mirrors - a piece of the puzzle
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Video.
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Stig.
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Constructing with Small Aluminum Parts
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Constructing with Small Aluminum Parts
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM BVC Mirror Blank?
- From: Joe Mirando <stargazer@atari-users.net>
- Re: ATM BVC Mirror Blank?
- From: Joe Mirando <stargazer@atari-users.net>
- Re: ATM BVC Mirror Blank?
- From: Joe Mirando <stargazer@atari-users.net>
- Re: ATM BVC Mirror Blank? - Berry Kriege book
- From: Joe Mirando <stargazer@atari-users.net>
- Re: ATM BVC Mirror Blank?
- From: Joe Mirando <stargazer@atari-users.net>
- Re: ATM 4" ronchi, day 4
- From: "John D. Upton" <upton@austin.ibm.com>
- RE: ATM Question re: Dahl null test math
- From: "John D. Upton" <upton@austin.ibm.com>
- Re: ATM DSC
- From: John Hutto <jdhutto@yahoo.com>
- Re: ATM DSC
- From: John Hutto <jdhutto@yahoo.com>
- ATM Any comments on these strokes for rough grinding?
- From: "John Murray" <johnm@chello.com.au>
- ATM A question on Metal tool design........
- From: "John Murray" <johnm@chello.com.au>
- ATM Date: Sun, 29 Oct 2000 12:44:45 -0800
- From: "John Sherman" <shermj@netzero.net>
- ATM BKD Hershelian
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM Another poor man collimating
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Classical Cass Collimation
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Copper Alloy Passivation
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Copper Alloy Passivation
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Copper Alloy Passivation
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Copper Alloy Passivation
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Copper Alloy Passivation
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Copper Alloy Passivation
- From: Joseph Johnston <usc@sover.net>
- Re: ATM LED 9 volt substitution
- From: Joseph Johnston <usc@sover.net>
- ATM Re: My Laser Collimators
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Laser Collimators?
- From: Joseph Johnston <usc@sover.net>
- ATM Adler flexed-mirror - dumb question
- From: "Joseph O'Neil" <joneil@multiboard.com>
- ATM Adler flexed-mirror - dumb question
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: ATM Cassegrain Optics
- From: <jrh@nofs.navy.mil>
- Re: ATM Wooden CB245 housing?
- From: <jrh@nofs.navy.mil>
- ATM Silver Coatings
- From: "Justin Kelly" <iustus@home.com>
- Re: ATM Silver Coatings
- From: "Justin Kelly" <iustus@home.com>
- Fw: ATM Aluminum tubbing
- From: "Karen Blodgett" <hercules155@peoplepc.com>
- ATM Exact O.D. of 2" Eyepieces
- From: Karl E Lewis <kal1971@juno.com>
- ATM Kenneth Novak Address?
- From: Karl E Lewis <kal1971@juno.com>
- ATM First Project - An Achromat
- From: Karl E Lewis <kal1971@juno.com>
- ATM Accessing the Archives
- From: Karl E Lewis <kal1971@juno.com>
- ATM Accessing the Archives
- From: Karl E Lewis <kal1971@juno.com>
- ATM Jaegers? Optica B/C
- From: Karl E Lewis <kal1971@juno.com>
- RE: ATM Alt Balance and Eyepieces
- From: "KEATING, RONALD J" <RKEATI1@entergy.com>
- ATM Secondary for 6"f8 attempt 2
- From: "Keir Davis" <kbd@tpg.com.au>
- Re: ATM Secondary for 6"f8 attempt 2
- From: "Keir Davis" <kbd@tpg.com.au>
- ATM Secondary construction....
- From: "Keir Davis" <kbd@tpg.com.au>
- ATM Tool size does matter?
- From: "Keir Davis" <kbd@tpg.com.au>
- ATM Baffled about baffles
- From: "Keir Davis" <kbd@tpg.com.au>
- ATM Third time unlucky....
- From: "Keir Davis" <kbd@tpg.com.au>
- Re: ATM focal legnth ..?
- From: Ken <lowther@worldnet.att.net>
- ATM Build your own aurora detector.
- From: Ken <lowther@worldnet.att.net>
- Re: ATM help me interpret my focal length tests
- From: Ken <lowther@att.net>
- Re: ATM Focault LED is 2 volt. Batteries deliver 3 volts.
- From: Ken <lowther@att.net>
- Re: ATM DIGEST in digest form
- From: Ken <lowther@att.net>
- Re: ATM Gulgolz#73
- From: Ken <lowther@att.net>
- Re: ATM Another poor man collimating
- From: Ken & Teresa Lilja <klilja@atl.mediaone.net>
- RE: ATM Large telescope question
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM 21" f/6 report: status and questions
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM 21" f/6 report: status and questions
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Hogging dilema
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM Quick tip: Tracking pits during grinding
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM Question re: Dahl null test math
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Stepping motors available
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM 21" f/6 - Status report and a question
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM-Pitch base or bases
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM mirror eyepiece?
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- Re: ATM Welding
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- ATM Commerical mirrors (again), etc.
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- ATM drag polishing
- From: "Klaas Honders" <k.honders@worldonline.nl>
- Re: ATM Aluminium disk
- From: Larry Arnold <larry19@home.com>
- Re: ATM Constructing with Small Aluminum Parts
- From: Larry Arnold <larry19@home.com>
- Re: ATM Constructing with Small Aluminum Parts
- From: Larry Arnold <larry19@home.com>
- Re: ATM Constructing with Small Aluminum Parts
- From: Larry Arnold <larry19@home.com>
- Re: ATM Alt Balance and Eyepieces
- From: Larry Arnold <larry19@home.com>
- RE: ATM New to list
- From: "Launie, Kenneth J" <LAUNIEK@polaroid.com>
- Re: ATM comments on the Adler flexed-mirror design in current S&T?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Hogging dilema
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM hogging dilemma : follow-up
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Done hogging. What's next?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Gugoloz 64 newbie question
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM pitch lap problem (?)
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Polishing, then mirror started sticking. Need help!
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Polishing, then mirror started sticking. Need help!
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Focault tester dimensions questions
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Focault tester dimensions questions
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Focault LED is 2 volt. Batteries deliver 3 volts.
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Focault LED is 2 volt. Batteries deliver 3 volts.
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Focault LED is 2 volt. Batteries deliver 3 volts. REDUX
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Down and dirty mirror stand ideas needed.
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM I saw my mirror in the Focault tester!!!!
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM I saw my mirror in the Focault tester!!!!
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM LED 9 volt substitution
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Site with photos of Focault images needed
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Focault scale for 18 threads/inch?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM grinding table page
- From: Les <les@hildenbrandt.com>
- ATM Grinding machine, oops
- From: Les <les@hildenbrandt.com>
- Re: ATM Another poor man collimating
- From: lindberg <lindberg@olywa.net>
- Re: ATM Eyepiece Selection
- From: lindberg <lindberg@olywa.net>
- Re: ATM Another poor man collimating
- From: lindberg <lindberg@olywa.net>
- Re: ATM secondary position
- From: lindberg <lindberg@olywa.net>
- ATM Focal length
- From: lindberg <lindberg@olywa.net>
- ATM Focal length
- From: lindberg <lindberg@olywa.net>
- Re: ATM Focal length
- From: lindberg <lindberg@olywa.net>
- R: ATM designing an astrograf
- From: Lorenzi Marco <mka@sicon-ups.com>
- ATM Push glass / Lose Weight
- From: "luis garcia" <igusus@hotmail.com>
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- From: Mail System Internal Data <MAILER-DAEMON@system.umsystem.edu>
- ATM New to list
- From: "mail.erie.net" <mitchell@erie.net>
- Re: ATM stupid mistake!!
- From: Malcolm J MacDonald <malmac2@juno.com>
- Re: ATM New substance mirrors
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Fiber light source - a burning issue
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM grinding machine
- From: Mark Suchting <masuch@cia.com.au>
- Re: ATM Hot motor!
- Re: ATM Club newsletters
- Re: ATM stupid mistake!!
- Re: ATM Tube material - definitive advice please
- Re: ATM newbie with dumb question
- Re: ATM PVC/ABS couplings - round two
- Re: ATM candle mirror
- ATM 8" f3.8 -- Worthy project?
- From: "Matt Terry" <mterry@tampabay.rr.com>
- ATM Dark skies now!
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- Re: ATM Dark skies now!
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- Re: ATM focal legnth ..?
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- Re: ATM Filters
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- Re: ATM To flex or not to flex
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- Re: ATM Re: Eyepiece selection
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- Re: ATM and your C-8
- From: "me" <natsp@alltel.net>
- RE: ATM Eypiece correlation to magnification
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Recoating/refiguring mirror
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM 21" f/6 report: status and questions
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Secondary de-center
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM polishing help
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM ronchi interpretation...
- From: "Mel Bartels" <mbartels@efn.org>
- RE: Re ATM Seeing objects of interest
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM ronchi mayday...
- From: "Mel Bartels" <mbartels@efn.org>
- publishing articles, was RE: ATM flex mirror and publishing
- From: "Mel Bartels" <mbartels@efn.org>
- RE: Why not a Web-based ATM journal?
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM ronchi mayday...
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Newtonian with a Tilted Secondary
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Another poor man collimating
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM 4" ronchi, day 4
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM New substance mirrors
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Accessing the Archives
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Trying to make a Spherical Surace and It's NOT WORKING!
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Focuser in Light Path
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Stepping motors available
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Stepping motors available
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM DOB construction question
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM help me interpret my focal length tests
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Flexed mirrors
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM 8 inch f/11-12 special considerations?
- From: "Mel Bartels" <mbartels@efn.org>
- ATM Fiber light source - a burning issue
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Constructing with Small Aluminum Parts
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM 8" f3.8 -- Worthy project?
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM electronics question
- From: astro.electronic@t-online.de (Michael Koch)
- ATM Brandon 20mm Coma-Corrector
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM electronics question
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Where can I buy a Telrad?
- From: Michael Lindner <mikel@att.net>
- Re: ATM designing an astrograf
- From: Michael Lindner <mikel@att.net>
- ATM Commercial Grinding Machines???
- From: Michael Lindner <mikel@att.net>
- Re: ATM flex mirror and publishing
- From: Michael Lindner <mikel@att.net>
- Re: ATM flex mirror and publishing
- From: Michael Lindner <mikel@att.net>
- Re: Why not a Web-based ATM journal?
- From: Michael Lindner <mikel@att.net>
- Re: Why not a Web-based ATM journal?
- From: Michael Lindner <mikel@att.net>
- ATM Search Engine
- From: Michael Lindner <mikel@att.net>
- Re: ATM Club newsletters
- From: Michael Lindner <mikel@att.net>
- Re: ATM Club newsletters
- From: Michael Lindner <mikel@att.net>
- Re: ATM Search Engine
- From: Michael Lindner <mikel@att.net>
- Re: ATM Focuser survey
- From: Michael Lindner <mikel@att.net>
- Re: ATM BVC Mirror Blank?
- From: Michael Lindner <mikel@att.net>
- Re: ATM 8" f3.8 -- Worthy project?
- From: Michael Lindner <mikel@att.net>
- Re: ATM Focault tester dimensions questions
- From: Michael Lindner <mikel@att.net>
- Re: ATM Focault tester dimensions questions
- From: Michael Lindner <mikel@att.net>
- Re: ATM Focault tester dimensions questions
- From: Michael Lindner <mikel@att.net>
- Re: ATM Down and dirty mirror stand ideas needed.
- From: Michael Lindner <mikel@att.net>
- Re: ATM Alt Balance and Eyepieces
- From: Michael Lindner <mikel@att.net>
- Re: ATM Schiefspiegler - looking for very basic advice/info
- From: Michael Lindner <mikel@att.net>
- Re: ATM Anybody still have the sundial spreadsheet
- From: Michael Lindner <mikel@att.net>
- Re: ATM Club newsletters
- From: mikeraz@patch.com (Michael Rasmussen)
- Re: ATM RE: Zerodur Polishing
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM RE: Zerodur Polishing
- From: spooner@page.az.net (Michael Spooner)
- ATM Flexing
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM Another poor man collimating
- From: spooner@page.az.net (Michael Spooner)
- ATM Focuser in Light Path
- From: "Mike Danielak" <mdanielak@atl.mediaone.net>
- Re: ATM Focuser in Light Path
- From: "Mike Danielak" <mdanielak@atl.mediaone.net>
- Re: ATM Focuser in Light Path
- From: "Mike Danielak" <mdanielak@atl.mediaone.net>
- Re: ATM comments on the Adler flexed-mirror design in current S&T?
- From: Mike Gerfen <mgerfen@caltech.edu>
- Re: ATM Epoxy mirrors - a piece of the puzzle
- From: Mike Gerfen <mgerfen@caltech.edu>
- RE: ATM Flexed mirrors
- From: Mike Gerfen <mgerfen@caltech.edu>
- ATM Newtonian with a Tilted Secondary
- From: Mike Selfridge <scifiguy@tstonramp.com>
- RE: ATM Newtonian with a Tilted Secondary
- From: Mike Selfridge <scifiguy@tstonramp.com>
- Re: ATM Newtonian with a Tilted Secondary (2 Mirror Folded Newtonian)
- From: Mike Selfridge <scifiguy@tstonramp.com>
- Re: ATM Search Engine
- From: Mike Selfridge <scifiguy@tstonramp.com>
- Re: ATM Newtonian with a Tilted Secondary (2 Mirror Folded Newtonian)
- From: Mike Selfridge <scifiguy@tstonramp.com>
- Re: ATM Eyepieces & Stuff
- From: Mike Selfridge <scifiguy@tstonramp.com>
- ATM PVC ep web page
- From: Mike Warne <mwarne@pixc.com>
- ATM test do not open
- From: Mike Warne <mwarne@pixc.com>
- RE: ATM PVC ep web page
- From: Mike Warne <mwarne@pixc.com>
- Re: ATM Wooden CB245 housing?
- ATM Rejuvinating Battery
- Re: ATM Crayford focuser question
- Re: ATM A question on Metal tool design........
- Re: ATM Laser Collimators?
- Re: ATM Exact O.D. of 2" Eyepieces
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Secondary Holder?
- From: mjc5 <mjc5@psu.edu>
- Re: ATM grinding machine
- From: mjc5 <mjc5@psu.edu>
- Re: ATM poor man's collimation
- From: mjc5 <mjc5@psu.edu>
- Re: ATM pitch lap netting
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Can you build a Telrad?
- From: mjc5 <mjc5@psu.edu>
- Re: ATM comments on the Adler flexed-mirror design in current S&T?
- From: mjc5 <mjc5@psu.edu>
- Re: ATM To flex or not to flex
- From: mjc5 <mjc5@psu.edu>
- Re: ATM To flex or not to flex
- From: mjc5 <mjc5@psu.edu>
- ATM Update on Grinder
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Flexing a Mirror into a Parabola
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Hogging dilema
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Flexing
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Hogging dilemma
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Flexing
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Hogging dilemma
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Tool size does matter?
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Hot motor!
- From: mjc5 <mjc5@psu.edu>
- ATM Collimater tube material found
- From: mjc5 <mjc5@psu.edu>
- Re: ATM The Ideal Astronomy Truck
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Another poor man collimating
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Re:Epoxy Mirrors
- From: mjc5 <mjc5@psu.edu>
- Re: ATM commercial mirrors -- are they getting better or not?
- From: mjc5 <mjc5@psu.edu>
- Re: ATM New substance mirrors
- From: mjc5 <mjc5@psu.edu>
- ATM Why do we use glass? (long)
- From: mjc5 <mjc5@psu.edu>
- Re: ATM New substance mirrors
- From: mjc5 <mjc5@psu.edu>
- Re: ATM New substance mirrors
- From: mjc5 <mjc5@psu.edu>
- Re: ATM The ultimate mirror cell?
- From: mjc5 <mjc5@psu.edu>
- Re: SV: ATM The ultimate mirror cell?
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Tube material - definitive advice please
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Trying to make a Spherical Surace and It's NOT WORKING!
- From: mjc5 <mjc5@psu.edu>
- Re: ATM proper grinding
- From: mjc5 <mjc5@psu.edu>
- ATM Grinder speed question
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Down and dirty mirror stand ideas needed.
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Flexed mirrors
- From: mjc5 <mjc5@psu.edu>
- Re: ATM electronics question
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Flexed mirrors
- From: mjc5 <mjc5@psu.edu>
- Re: ATM electronics question
- From: mjc5 <mjc5@psu.edu>
- ATM worm gear ?
- From: "natsp" <natsp@alltel.net>
- ATM focal legnth ..?
- From: "natsp" <natsp@alltel.net>
- ATM focal legnth ..?
- From: "natsp" <natsp@alltel.net>
- ATM focal legnth...?
- From: "natsp" <natsp@alltel.net>
- Re: ATM Filters
- From: "natsp" <natsp@alltel.net>
- Re: ATM secondary position
- From: "NetHere" <bobmay@nethere.com>
- Re: ATM Frankenstein & Sorbothane
- RE: ATM Search Engine
- From: Nick Cain <nick.cain@navisworks.com>
- SV: ATM poor man's collimation
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM poor man's collimation
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Another poor man collimating
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Another poor man collimating
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Another poor man collimating
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>