[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM ...on homebuilt EQ mounts

To: Gary Woods <gwoods@albany.net>
Subject: Re: ATM ...on homebuilt EQ mounts
From: Gene Horr <genehorr@swbell.net>
Date: Thu, 12 Nov 1998 22:01:50 -0600
CC: Peter <kitgears@kitgear.com>, atm@shore.net
Organization: Southwestern Bell Internet Services
References: <008c01be0d31$09756640$d454fea9@jim> <364B9B78.6349BB13@kitgear.com> <364ba5c9.5053052@mail.albany.net>
Reply-To: Gene Horr <genehorr@swbell.net>
Sender: owner-atm@shore.net

Gary Woods wrote:

> A friend told me that there are 3 grades of Loctite-
> disassemblable with hand tools
> disassemblable with power tools
> disassemblable with thermonuclear devices

Although # 3 is pushing it a little, Loctite is actually easier
to work with than you think.  It loosens up under heat.  If
you can't directly heat the screw head then heat the screwdriver
(please, have a well insulated handle <g>).

Gene Horr
genehorr@swbell.net

References:
- ATM ...on homebuilt EQ mounts
  - From: "Jim Piunti" <jim_piunti@email.msn.com>
- Re: ATM ...on homebuilt EQ mounts
  - From: Peter <kitgears@kitgear.com>
- Re: ATM ...on homebuilt EQ mounts
  - From: gwoods@albany.net (Gary Woods)

Prev by Author: Re: ATM Refurbishing a 10" SCT
Next by Author: ATM looking for polar alignment software
Prev by thread: Re: ATM ...on homebuilt EQ mounts
Next by thread: Re: ATM ...on homebuilt EQ mounts
Index(es):
- Author
- Thread