ATM Gluing Lexan

[Adam Rosenberg <adamr@synopsys.com>]

Methyl Chloride is the best way to glue lexan and other
acrylics.  There are some acrylic cements available @
Home Depot.  Hobby shops usually have some of this stuff
too.  I also found an ether based adhesive that was pretty
good.  The ether stuff requires excellent ventilation.

One tip, don't get methyl chloride on your skin and if
you do flush it in water immediately.  It dosn't take
much of this stuff in your blood stream to kill you.

Good luck,

Adam R.