Amateur Telescope Makers (ATM) Archive for NOV98 - by author
- ATM Re: atm-digest V1 #1355
- From: Aaron Michael Cohen <alcohen@ix.netcom.com>
- ATM Gluing Lexan
- From: Adam Rosenberg <adamr@synopsys.com>
- Re: ATM Gluing Lexan
- From: Adam Rosenberg <adamr@synopsys.com>
- ATM atm Wood what kind?
- From: Adams <adams@rmci.net>
- ATM atm tube black
- From: Adams <adams@rmci.net>
- ATM atm mirror cell
- From: Adams <adams@rmci.net>
- ATM atm jigsaw circles?
- From: Adams <adams@rmci.net>
- Re: ATM Jigsaw Circles
- From: Adams <adams@rmci.net>
- ATM atm formica
- From: Adams <adams@rmci.net>
- ATM atm junk material
- From: Adams <adams@rmci.net>
- ATM dob alt. bearing size
- From: Adams <adams@rmci.net>
- Re: ATM A few questions
- From: Adams <adams@rmci.net>
- Re: SV: ATM spiders - curved or straight
- From: Adams <adams@rmci.net>
- ATM atm kit source
- From: Adams <adams@rmci.net>
- ATM-removing bad ic's
- ATM PC board and drills
- ATM 20-25-30 inch
- From: "alderlie" <alderliesten.atelier@worldonline.nl>
- ATM 32 INCH GREEN PLATE GLASS
- From: "alderlie" <alderliesten.atelier@worldonline.nl>
- ATM 32 INCH Not melting ,but fusing
- From: "alderlie" <alderliesten.atelier@worldonline.nl>
- ATM hogging out experience
- From: "alderlie" <alderliesten.atelier@worldonline.nl>
- ATM 32 inch plate glass,melting or ..
- From: "alderlie" <alderliesten.atelier@worldonline.nl>
- ATM Mobsby null test
- From: "alderlie" <alderliesten.atelier@worldonline.nl>
- ATM Telescope Making and Kalmbach
- From: "alderlie" <alderliesten.atelier@worldonline.nl>
- ATM To the Dentist for a porcelain mirror ?
- From: "alderlie" <alderliesten.atelier@worldonline.nl>
- Re: Subject: RE: ATM fiber optics
- From: "Alexander Urban" <urban@mpe.mpg.de>
- ATM Focal Ratio question
- From: alphasig@mail.usa.com
- ATM Declination Axis
- From: Andrew.Martyn@dao.defence.gov.au
- ATM Archives updated for October 1998
- From: "Andy Steere" <andy@www.system.missouri.edu>
- Re: ATM SWITCHING from 18" Dobs to 10"-12" SCT: COMMENTS?
- From: Andy Wallace <andywallace@home.com>
- Re: ATM 32 INCH GREEN PLATE GLASS
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Refractor building questions
- From: Anthony Stillman <atmer@flash.net>
- ATM Sagitta
- From: Anthony Stillman <atmer@flash.net>
- ATM Cooling and Equilibrium (short)
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM cassegrain baffles
- From: Anthony Stillman <atmer@flash.net>
- RE: ATM Diffraction Thingie?
- From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
- ATM fiber optics
- From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
- ATM CCD Cookbook (camera window)
- From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
- RE: ATM helium filled OTAs
- From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
- RE: ATM fiber optics
- From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
- ATM TM back issues
- From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
- Re: ATM Page.
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM balancing
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM Absolute Beginner
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM Re: Balancing Long Telescope Tubes
- From: Ari <Ari@birmingham-us.crosswinds.net>
- ATM Stable Way of Mounting Focuser Board
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM Low profile helical focuser
- From: Ari <Ari@birmingham-us.crosswinds.net>
- ATM Cheap Polar Mounting
- From: Ari <Ari@birmingham-us.crosswinds.net>
- ATM GRRRR
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM RC telescope design
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM TM Reprints
- From: Ari <Ari@birmingham-us.crosswinds.net>
- ATM RE: (IAAC) German magazine Interstellarum
- From: "Art Russell" <artrussell@mindspring.com>
- ATM Telescope Making Magazine
- From: "Art Russell" <artrussell@mindspring.com>
- RE: ATM SWITCHING from 18" Dobs to 10"-12" SCT: COMMENTS?
- From: "Art Russell" <artrussell@mindspring.com>
- ATM RE: Picture
- From: "Art Russell" <artrussell@mindspring.com>
- Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [srychnov@uci.edu (Scott Rychnovsky)]]
- From: Arthur Lewis Williams <a.l.williams@psilink.co.uk>
- ATM Telescope Report
- From: "Asaf S.-T." <asaf@maxnm.com>
- ATM Spectroscope for telescope
- From: "Asaf S.-T." <asaf@maxnm.com>
- Re: ATM New Group Member
- From: "Asaf S.-T." <asaf@maxnm.com>
- Re: ATM atmpage.com?
- From: "Asaf S.-T." <asaf@maxnm.com>
- Re: ATM atm Wood what kind?
- From: "Asaf S.-T." <asaf@maxnm.com>
- ATM http://www.atmpage.ml.org
- From: "Asaf S.-T." <asaf@maxnm.com>
- ATM Re: 500 Megabytes?
- From: "Asaf S.-T." <asaf@maxnm.com>
- ATM Read This
- From: "Asaf S.-T." <asaf@maxnm.com>
- ATM Statistics
- From: "Asaf S.-T." <asaf@maxnm.com>
- ATM Re: supplies for making telescopes
- From: "Asaf S.-T." <asaf@maxnm.com>
- ATM How many people?
- From: "Asaf S.-T." <asaf@maxnm.com>
- Re: ATM Another set of newbie questions
- From: "Asaf S.-T." <asaf@maxnm.com>
- Re: ATM co-op web site
- From: "Asaf S.-T." <asaf@maxnm.com>
- ATM I DID IT!
- From: "Asaf S.-T." <asaf@maxnm.com>
- Re: (meteorobs) Re: ATM I DID IT!
- From: "Asaf S.-T." <asaf@maxnm.com>
- ATM A few questions
- From: "Asaf S.-T." <asaf@maxnm.com>
- ATM A few camera questions
- From: Asaf Shtull-Trauring <astropal@yahoo.com>
- ATM Misunderstanding
- From: Asaf Shtull-Trauring <astropal@yahoo.com>
- ATM Optic cleaning
- From: Asaf Shtull-Trauring <astropal@yahoo.com>
- Re: ATM A few camera questions
- From: Asaf Shtull-Trauring <astropal@yahoo.com>
- ATM My project almost destroyed
- From: Asaf Shtull-Trauring <astropal@yahoo.com>
- ATM OT: AstroArchive in November
- From: "astro-archive" <astro-archive@inside.net>
- ATM OT: Astro Archive in December
- From: "astro-archive" <astro-archive@inside.net>
- Re: ATM [Fwd: Dobsonian Assistance]
- Re: ATM Cutting round plywood bearing in half?
- ATM MDF Junk Construction material
- Re: ATM MDF Junk Construction material
- Re: ATM MDF Junk Construction material
- Re: ATM Shrouded In Mystery?
- ATMJ #12
- Re: ATMJ #13
- ATM Re: TM Reprints
- Re: TM & ATMJ #1
- Re: TM & ATMJ #2
- Re: TM & ATMJ #3
- Re: TM & ATMJ #4
- ATM Re: Msg. to Michael 1
- ATM Re: Msg. to Michael 2
- Re: ATM Re: Msg. to Michael 1
- ATM Re: Msg. for Ric et al
- ATM Re: 18-inch Dob vs 10-inch SCT
- ATM Re: OSLO Lt.
- ATM Re:18-inch Dob...
- ATM starting an atm workshop
- From: "banicki" <banicki@suninternet.com>
- Re: ATM starting an atm workshop
- From: "banicki" <banicki@suninternet.com>
- Re: ATM Copyright
- From: "banicki" <banicki@suninternet.com>
- ATM TM-Kalmbach / 6-inch mirror focal length
- From: "banicki" <banicki@suninternet.com>
- [ATM]:Making a PEC from scratch for a C8
- ATM Cave Herring Mirror
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- ATM Thanks for Herring Info
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- ATM new scope... how light can we go ?
- From: "Benoit Schillings" <benoit@be.com>
- ATM Again:Dall-Kirkham and coma correctors...
- From: "Benoit Schillings" <benoit@be.com>
- Re: ATM new scope... how light can we go ?
- From: "Benoit Schillings" <benoit@be.com>
- Re: ATM new scope... how light can we go ?
- From: "Benoit Schillings" <benoit@be.com>
- RE: How large, how exotic (was- ATM Status-- 20" Cassegrain)
- From: "Benoit Schillings" <benoit@be.com>
- RE: How large, how exotic (was- ATM Status-- 20" Cassegrain)
- From: "Benoit Schillings" <benoit@be.com>
- RE: ATM BeOS real time operating system
- From: "Benoit Schillings" <benoit@be.com>
- Re: ATM Measuring MTF
- From: "Benoit Schillings" <benoit@be.com>
- Re: ATM Indexes to Sky & Telescope
- From: "Betsy or Mike Marchand" <bmarchan@mnsi.net>
- ATM optical flats!!!
- From: "Bill Hollenbach" <zasah52@iafrica.com>
- Re: ATM mail bomb
- From: "Bill Hollenbach" <zasah52@iafrica.com>
- Re: ATM Sagitta
- From: "Bill Hollenbach" <zasah52@iafrica.com>
- ATM Spiders
- From: "Bill Hollenbach" <zasah52@iafrica.com>
- Re: ATM Sagitta
- From: "Bill Hollenbach" <zasah52@iafrica.com>
- ATM mirror bevelling
- From: "Bill Hollenbach" <zasah52@iafrica.com>
- Re: adventures of ATM Woman
- From: "Bill Hollenbach" <zasah52@iafrica.com>
- Duplicate Messages? and Re: ATM VIRUS WARNING
- From: Bill McHale <wmchal1@umbc.edu>
- Re: ATM:Lightening plywood panels
- From: Bill McHale <wmchal1@umbc.edu>
- Re: ATM Telescope Design
- From: Bill McHale <wmchal1@umbc.edu>
- Re: ATM Telescope Design
- From: Bill McHale <wmchal1@umbc.edu>
- RE: ATM BeOS real time operating system
- From: Bill McHale <wmchal1@umbc.edu>
- Re: ATM mirror modification
- From: Bill McHale <wmchal1@umbc.edu>
- Re: ATM Kalmbach and TM Magazine
- From: Bill McHale <wmchal1@umbc.edu>
- Re: ATM Chip Question
- From: "Bill Prewitt" <bprewitt@neo.lrun.com>
- ATM first 20"
- From: "Bill Prewitt" <bprewitt@neo.lrun.com>
- ATM Size of slit.
- From: "Birthe & Anders Eisum" <eisum@image.dk>
- ATM Silvering and hogging
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM hogging out troubles
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Cutting round plywood bearing in half?
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Cutting round plywood bearing in half?
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Cutting round plywood bearing in half?
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Cutting round plywood bearing (jigsaw users beware!)
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Junk material/mirror
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM atm'ing, magazines, and the internet
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Chipped mirror
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM SWITCHING from 18" Dobs to 10"-12" SCT: COMMENTS?
- From: BOB PRABOWO <BOB@bahana.co.id>
- ATM Paracorr (coma correctors) for specific focal lenghts
- ATM NASA asks Amateur Astronomers for Help Observing the Leonid Shower
- Re: ATM ...on homebuilt EQ mounts
- From: Brad Davy <bdavy@fred.net>
- ATM "Stiction"
- From: Brad Davy <bdavy@fred.net>
- Re: ATM "Stiction"
- From: Brad Davy <bdavy@fred.net>
- Re: ATM "Stiction"
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Your Favorite Wood Glue?
- From: Brad Davy <bdavy@fred.net>
- ATM Quality of commercial secondary mirrors?
- From: Brant Katkansky <bmk@pobox.com>
- Re: ATM Quality of commercial secondary mirrors?
- From: Brant Katkansky <bmk@pobox.com>
- Re: ATM Quality of commercial secondary mirrors?
- From: Brant Katkansky <bmk@pobox.com>
- Re: ATM atm Wood what kind?
- From: Brant Katkansky <bmk@pobox.com>
- ATM Cutting round plywood bearing in half?
- From: Brant Katkansky <bmk@pobox.com>
- ATM Cutting circles with a router, beginner's perspective
- From: Brant Katkansky <bmk@pobox.com>
- Re: ATM Cutting round plywood bearing in half?
- From: Brant Katkansky <bmk@pobox.com>
- ATM Found a good source for Al tubing
- From: Brant Katkansky <bmk@pobox.com>
- Re: ATM Off topic-meteor shower
- From: Brant Katkansky <bmk@pobox.com>
- Re: ATM Ebony Star and Teflon
- From: Brant Katkansky <bmk@pobox.com>
- Re: ATM Dob Alt bearings
- From: Brant Katkansky <bmk@pobox.com>
- ATM My 12.5" truss tube project on the web
- From: Brant Katkansky <bmk@pobox.com>
- Re: ATM Again:Dall-Kirkham and coma correctors...
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Re: University Optics [Long]
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Again:Dall-Kirkham and coma correctors...
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Re: University Optics [Long] Nagler type eyepieces
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- ATM Paracorr (coma correctors) for specific focal lenghts
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM mirror mirror on the wall
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- ATM Re: RKE's vs. Nags..?
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- ATM OSLO LT and Schmidt Curves
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- ATM Spiders (was A few questions)
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: SV: ATM spiders - curved or straight
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re:SV: ATM spiders - curved or straight
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Sungazing for Newbies?
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Focal Ratio question
- From: Brent Russell <brussel@global.co.za>
- Re: ATM Anodizing Aluminum
- From: Brent Russell <brussel@global.co.za>
- Re: ATM Re: Fork mount for 8" Newtonian, etc.
- From: Brent Russell <brussel@global.co.za>
- Re: ATM VIRUS WARNING
- From: Brian Nestel <blast@aloha.net>
- Re: ATM VIRUS WARNING
- From: Brian Nestel <blast@aloha.net>
- Re: Duplicate Messages? and Re: ATM VIRUS WARNING
- From: Brian Nestel <blast@aloha.net>
- Re: ATM New Group Member
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Mirror Cells
- From: Brian Nestel <blast@aloha.net>
- Re: ATM atm Wood what kind?
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Page.
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Page.
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Copyright
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Re: Source for Al Tubing
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Aluminum solder
- From: Brian Nestel <blast@aloha.net>
- Re: ATM ...on homebuilt EQ mounts
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Refurbishing a 10" SCT
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Sealed Lead Acid Battery Spatial Orientation
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Refurbishing a 10" SCT
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Refurbishing a 10" SCT
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Sealed Lead Acid Battery Spatial Orientation
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Low profile helical focuser
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Kalmbach and TM Magazine
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Kalmbach and TM Magazine
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Telescope Making and Kalmbach
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Telescope Making and Kalmbach
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Aluminum solder
- From: Brian Nestel <blast@aloha.net>
- Re: ATM TM Reprints
- From: Brian Nestel <blast@aloha.net>
- ATM Web site updated with CAD drawings
- From: "Bruce Sayre" <sayre@foothill.net>
- RE: ATM SWITCHING from 18" Dobs to 10"-12" SCT: COMMENTS?
- From: "Bruce Sayre" <sayre@foothill.net>
- RE: ATM 40 Pounder Report ( First light)
- From: "Bruce Sayre" <sayre@foothill.net>
- ATM Six Inch RFT Web Page
- From: Bruce Weertman <brucew@wrq.com>
- Re: ATM spiders - curved or straight
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- Re: ATM A few questions
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- Re: SV: ATM spiders - curved or straight
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- Re: ATM Making Flats
- ATM re: mirror-mirror 8"
- Re: ATM: glass spherometer
- Re: ATM:Lightening plywood panels
- From: Buck Childers <buckchil@sound.net>
- Re: ATM atm Wood what kind?
- From: Buck Childers <buckchil@sound.net>
- Re: ATM Teflon, Delrin, UHMW, Nylon
- From: Buck Childers <buckchil@sound.net>
- Re: ATM Quick tool question
- From: Buck Childers <buckchil@sound.net>
- ATM I book on ebay.
- From: Buck Childers <buckchil@sound.net>
- Another ATM scope sees the light of day....err night :-)
- From: Buck Childers <buckchil@sound.net>
- Re: ATM beginners basic mirror question
- From: Buck Childers <buckchil@sound.net>
- Re: ATM Q re dichroic mirrors for color correcting a lens
- From: "C. & J. Wade" <ceweed@qatar.net.qa>
- Re: ATM atmpage.com
- From: Callum Potter <CallumP@selectst.com>
- RE: ATM Backyard observatories
- From: Callum Potter <CallumP@selectst.com>
- Subject: RE: ATM fiber optics
- From: Callum Potter <CallumP@selectst.com>
- ATM Indexes to Sky & Telescope
- From: Callum Potter <CallumP@selectst.com>
- ATM SWITCHING from 18" Dobs to 10"-12" SCT: COMMENTS?
- From: Carl Woebcke <carlw@telis.org>
- ATM CONCLUSION on SWITCHING from 18" Dobs to SCT
- From: Carl Woebcke <carlw@telis.org>
- Ultimate ATM project.
- From: Cary Chleborad <bennu@ns.net>
- ATM Telescope Making Magazine
- From: Cary Chleborad <bennu@ns.net>
- Re: ATM 40 Pounder Report ( First light)
- From: Cary Chleborad <bennu@ns.net>
- Re: ATM 20-25-30 inch
- From: Cary Chleborad <bennu@ns.net>
- Re: ATM Cutting round plywood bearing in half?
- From: Cary Chleborad <bennu@ns.net>
- ATM Newbie need rough grinding advice
- From: Cathy James <cajames@gte.net>
- ATM Very slllloooowwwwww rough grinding
- From: Cathy James <cajames@gte.net>
- ATM RE: atm-digest V1 #1355
- From: Cathy James <cajames@gte.net>
- FW: ATM VIRUS WARNING
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM Starfinder Drive Improvements
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM Camera Lenses as Eyepieces
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- FW: Re[2]: ATM helium filled OTAs
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM A few questions
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM Cave Herring Mirror
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- ATM leonids
- From: chili <chili_1@yahoo.com>
- Re: ATM Squaring the focuser
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Squaring the focuser
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Squaring the focuser
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM: Metal Mirror Cells
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM: Metal Mirror Cells
- From: Chuck Dethloff <telmor@teleport.com>
- ATM Varnish question
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM spiders - curved or straight
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Length of Aluminum Tubing
- From: Chuck Dethloff <telmor@teleport.com>
- ATM Shrouds still have a purpose
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Shrouds still have a purpose
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Unexciting mounting questions
- From: Chuck Hards <chuckh@companionsystems.com>
- Re: ATM Unexciting mounting questions
- From: Chuck Hards <chuckh@companionsystems.com>
- Re: ATM Unexciting mounting questions
- From: Chuck Hards <chuckh@companionsystems.com>
- Re: ATM:Lightening plywood panels
- From: Chuck Hards <chuckh@companionsystems.com>
- Re: ATM Oblate, TDE, Oblate, TDE etc.
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- Re: ATM Cheap Aluminizing!
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- Re: ATM Digital setting circle units...
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- ATM Gel or not Gel?
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- Re: ATM Cave Herring Mirror
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- Re: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["R R" <wjkkr@hotmail.com>]]
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- Re: Re[2]: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["R R" <wjkkr@hotmail.com>]]
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- Re: ATM SWITCHING from 18" Dobs to 10"-12" SCT: COMMENTS?
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- Re: ATM SWITCHING from 18" Dobs to 10"-12" SCT: COMMENTS?
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- Re: ATM quick figuring ?
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- Re: ATM Woman!
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- Re: ATM Woman part 2
- From: "Chuck Hovatter" <charleshovatter@acelink.net>
- ATM Re: Eq. Platform finished!
- From: "Chuck Shaw" <cshaw@ghg.net>
- Re: ATM Equatorial Platform
- From: cshaw@ghg.net (Chuck Shaw)
- ATM Polishing and temperature
- From: Claude Serquet <claude.serquet@qtgroup.com>
- ATM Re: Ceramic mirrors
- From: "Clint Bach" <clintbach@earthlink.net>
- ATM Dob Driver..II
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM:Lightening plywood panels
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Re: Dall-Kirkham Design
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM 20-25-30 inch
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM new scope... how light can we go ?
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Monel retraction
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Camera Lenses as Eyepieces
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Camera Lenses as Eyepieces
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM TM's # of subscribers
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Again:Dall-Kirkham and coma correctors...
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Re: Temperature of Telescopes, and of People
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Monel retraction
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Thin glass, thick plaster
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: Are binoculars really an advantage? (was Re: ATM 20-25-30 inch)
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Temperature Equalization
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Temperature Equalization
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM helium filled OTAs
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Re: RKE's vs. Nags..?
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: Re[2]: ATM helium filled OTAs
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Aluminum solder
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Torque Tube Mount
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: Re[2]: ATM MDF Junk Construction material
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Junk material/mirror
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM 12.5" first light
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Junk material/mirror
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM RC telescope design
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Junk material/mirror
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Digital setting circle units...
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Cave Herring Mirror
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Schmidt Happens.....
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Re: 18-inch Dob vs 10-inch SCT
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Re: OSLO Lt.
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM junk material
- From: Colt <colt@airmail.net>
- ATM Junk material/mirror
- From: Colt <colt@airmail.net>
- Re: ATM wasJunk material/mirror -now mirror
- From: Colt <colt@airmail.net>
- ATM getting started
- From: Colt <colt@airmail.net>
- RE: ATM Another set of newbie questions
- From: "Cote, David" <DCote@ictgroup.com>
- ATM atmpage.com?
- From: Curtis & Marcie Greer <greerc@icx.net>
- Re: ATM New Group Member
- From: Curtis & Marcie Greer <greerc@icx.net>
- Re: ATM Copyright, Long and Boring
- From: Curtis & Marcie Greer <greerc@icx.net>
- Re: FW: Re[2]: ATM helium filled OTAs
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM Page.
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: RE: ATM Cutting round plywood bearing in half?
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM Equatorial Platform - Errata, spreadsheet, and emailaddress
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM Request for TM back issues
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM Absolute Beginner
- From: Dan Brown <danb@accex.net>
- Re: ATM MDF Junk Construction material
- From: Dan Brown <danb@accex.net>
- Re: ATM General Tool Use and Construction
- From: Dan Brown <danb@accex.net>
- Re: ATM General Tool Use and Construction
- From: Dan Brown <danb@accex.net>
- ATM New web page
- From: Dan Brown <danb@accex.net>
- ATM Grinding/polishing machines
- From: Dan Brown <danb@accex.net>
- Re: ATM General Tool Use and Construction
- From: Dan Brown <danb@accex.net>
- Re: ATM General Tool Use and Construction
- From: Dan Brown <danb@accex.net>
- Re: ATM Dob Alt bearings
- From: Dan Brown <danb@accex.net>
- Re: ATM sources for truss tubes in Bay Area? -- summary
- From: Dan Brown <danb35@earthlink.net>
- Re: ATM A few camera questions
- From: Dan Brown <danb35@earthlink.net>
- Re: ATM A few camera questions
- From: Dan Brown <danb35@earthlink.net>
- Re: ATM Making Flats
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Fw: Contaminants
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Making Flats
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM ...on homebuilt EQ mounts
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM ...on homebuilt EQ mounts
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Junk material/mirror
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Junk material/mirror
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Re: high magnification
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Junk material/mirror
- From: "Dan Chaffee" <dchaffee@gvi.net>
- ATM RE: stick a fork-
- From: "Dan Chaffee" <dchaffee@gvi.net>
- ATM A few materials of choice
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM spiders - curved or straight
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: SV: ATM spiders - curved or straight
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: SV: ATM spiders - curved or straight
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: SV:RE: ATM spiders - curved or straight
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM New on list
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM [Fwd: Planetary Questions]
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Measuring rough grind depth...
- From: "Danie Malan" <DGM@it.sun.ac.za>
- Re: ATM Silvering and hogging
- From: "Danie Malan" <DGM@it.sun.ac.za>
- Re: ATM Dob Alt bearings
- From: "Danie Malan" <DGM@it.sun.ac.za>
- Re: ATM New on list
- From: "Danie Malan" <DGM@it.sun.ac.za>
- ATM Re: Composite Mirrors
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Page.
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM And the Winners Are...
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM General Tool Use and Construction
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Junk material/mirror
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Junk material/mirror
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Re: TM Reprints
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: TM & ATMJ #4
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Your Favorite Wood Glue?
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Fiberglass Finish
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: adventures of ATM Woman
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Important People
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM first 20"
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Schalk-Newtonian or Shafer Mak-Newtonian?
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Re: Dall-Kirkham Design
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Re: Dall-Kirkham Design
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Plastic bottles for abrasive/slurry dispensation
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM "Astroturf" substitutes from Home Depot
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Large mirror pitch laps. How to make
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Re: Shafer-Maksutov
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Page.
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Page.
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Page.
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM TM's # of subscribers
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM TM's # of subscribers
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Re: University Optics [Long] Nagler type eyepieces
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Page.
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Cutting round plywood bearing (jigsaw users beware!)
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM von Hof eyepieces
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Caustic tester questions
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Anti-reflective etching of glass surfaces
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Re: von Hof eyepieces
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Caustic testers
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Off topic-meteor shower
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM TM Reprints
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Reviving TM magazine
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM TM Reprints
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM TM Reprints
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Telescope Making and Kalmbach
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Cave Herring Mirror
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM TM Reprints
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM TM Reprints
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Re: Ceramic Mirror was ...
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM 38"glass/cutting/slumping/etc
- From: "Dave Allmon" <dallmon@swbell.net>
- ATM Fw: Contaminants
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Chip Question
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM:Lightening plywood panels
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM:Lightening plywood panels
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM atmpage.com
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: Re[2]: ATM atmpage.com
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Page.
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Figuring blues for an F2.5
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Page.
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Figuring blues for an F2.5
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Cutting round plywood bearing in half?
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: Re[2]: ATM Page.
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Thin glass, thick plaster
- From: "Dave Allmon" <dallmon@swbell.net>
- Re:ATM 32 INCH Not melting ,but fusing
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Re: Ceramic mirrors
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Thin glass, thick plaster
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Thin glass, thick plaster
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Copyright
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: Re[2]: ATM helium filled OTAs
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Telescope Design
- From: "Dave Allmon" <dallmon@swbell.net>
- ATM CCD Devices
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Re:Gluing lexan
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM Cutting round plywood bearing (jigsaw users beware!)
- From: "Dave Allmon" <dallmon@swbell.net>
- Re: ATM atm junk material
- From: "Dave Allmon" <dallmon@swbell.net>
- ATM Re-greasing equatorial mount
- From: Dave Gill <dpgill@raex.com>
- Re: ATM Re-greasing equatorial mount
- From: Dave Gill <dpgill@raex.com>
- Re: ATM Re: University Optics [Long]
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Your Favorite Wood Glue?
- From: David Bevel <davebevel@mindspring.com>
- ATM D.I.Y. mounts
- From: "David Cumming" <David@dcumming.freeserve.co.uk>
- Re: ATM Cave Herring Mirror
- From: "David H. Lilly" <dhl@sprynet.com>
- Re: ATM Flats & diagonals
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM:Lightening plywood panels
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- ATM: Metal Mirror Cells
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Grinding/polishing machines
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Chipped mirror
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Observation on Chipped Mirror
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Re: Source for Al Tubing
- From: David Reed <dzreed@mail.rdu.bellsouth.net>
- ATM atm eq
- From: David Reed <dzreed@mail.rdu.bellsouth.net>
- ATM ASM/BVC
- From: David Reed <dzreed@mail.rdu.bellsouth.net>
- Re: ATM Magnetometers
- From: "David Reynolds" <davidrey@ij.net>
- Re: ATM DISASTER (Takahashi Cass)
- From: "David Simons" <hmsimons@hotmail.com>
- Re: ATM DISASTER (Takahashi Cass)
- From: "David Simons" <hmsimons@hotmail.com>
- ATM Showers
- From: "Dawie Botes" <DAWIEB@wwg3.uovs.ac.za>
- ATM installing a dec gear
- From: dcartolano@snet.net
- Re: ATM uhhhh tool mess up big time
- ATM Figuring blues for an F2.5
- From: Dean Ketelsen <ketelsen@as.arizona.edu>
- Are binoculars really an advantage? (was Re: ATM 20-25-30 inch)
- From: deepsky <deepsky@usmo.com>
- ATM Ronchi/Foucault Mirror Testing
- From: Dennis <dennis@castle.net>
- Re: ATM Spherometer
- From: Dennis Rech <junkman@olywa.net>
- ATM Focal Ratio Question
- ATM Ceramic Mirror
- ATM mail bomb
- Re: ATM Your Favorite Wood Glue?
- From: Don Halter <dhalter@ghg.net>
- RE: ATM Silvering and hogging
- From: Don Loftus <dloftus@edu15.coe.ufl.edu>
- RE: ATM Telescope Making and Kalmbach
- From: Don Loftus <dloftus@edu15.coe.ufl.edu>
- Re: ATM Refractor building questions
- From: DON morrison <donjenny@senet.com.au>
- RE: ATM Question on rough grinding
- From: Don Ware - CSS <Don.Ware@digital.com>
- RE: ATM Jigsaw Circles
- From: Don Ware - CSS <Don.Ware@digital.com>
- RE: ATM cassegrain baffles
- From: Don Ware - CSS <Don.Ware@digital.com>
- Re: ATM DISASTER (Takahashi Cass)
- From: Donald Clement <clement@inetworld.net>
- Re: ATM DISASTER (Takahashi Cass)
- From: Donald Clement <clement@commquest.com>
- Re: ATM DISASTER (Takahashi Cass)
- From: Donald Clement <clement@commquest.com>
- Re: ATM Components for Mel's Dob driver
- From: Donald Clement <clement@commquest.com>
- Re: Thermal Stabilized (was ATM Large mirrors)
- From: Donald Clement <clement@commquest.com>
- Re: ATM new scope... how light can we go ?
- From: Donald Clement <clement@commquest.com>
- Re: ATM Re: how light can we go ?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Junk material/mirror
- From: Donald Clement <clement@commquest.com>
- Re: ATM Junk material/mirror
- From: Donald Clement <clement@inetworld.net>
- ATM Measuring MTF
- From: Donald Clement <clement@commquest.com>
- ATM Aluminum Tubing in SD
- From: Donald Clement <clement@commquest.com>
- Re: ATM Shrouds still have a purpose
- From: Donald Clement <clement@commquest.com>
- ATM atm@shore.net
- From: Doug Angle <Douglas.S.Angle@can.dupont.com>
- ATM Regreasing
- From: DP Gill <dpgill@raex.com>
- Re: ATM Re-greasing equatorial mount
- From: DP Gill <dpgill@raex.com>
- Re: ATM Starfinder Drive Improvements
- From: "dpitou" <dpitou@ix.netcom.com>
- Re: ATM Re: Fork mount for 8" Newtonian, etc.
- From: "dpitou" <dpitou@ix.netcom.com>
- Re: ATM Declination Axis
- From: "dpitou" <dpitou@ix.netcom.com>
- ATM Catalogs
- Re: ATM Star Test Results - flaring on one side of focus
- Re: ATM TM Reprints
- ATM The R-C and other options
- ATM "Flats" for Autocollimation Null Testing
- Re: ATM Foucault Test Simulator
- Re: ATM 8" CCD camera considerations
- Re: ATM OSLO LT and Schmidt Curves
- Re: SV: ATM spiders - curved or straight
- Re[2]: ATM DISASTER (Takahashi Cass)
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM-removing bad ic's
- From: Dwight Elvey <elvey@hal.com>
- ATM checking rough grind depth
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Mounting thin mirror
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Mounting thin mirror
- From: Dwight Elvey <elvey@hal.com>
- RE[2]: ATM checking rough grind depth
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Can I use this glass?
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM checking rough grind depth
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Focal Ratio question
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM atmpage.com
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM new scope... how light can we go ?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Dobson solar telescope?
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Paraboloid Paranoid
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM helium filled OTAs
- From: Dwight Elvey <elvey@hal.com>
- ATM extended Foucault test
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM extended Foucault test
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM extended Foucault test
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Foucault Tester Light Source Question
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Focal Ratio Question
- From: Dwight Elvey <elvey@hal.com>
- ATM Re: high magnification
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Polishing Machine-Motor Wiring Question
- From: Dwight Elvey <elvey@hal.com>
- ATM atm junk material
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Quick tool question
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Re: Fork mount for 8" Newtonian, etc.
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Re: Fork mount for 8" Newtonian, etc.
- From: Dwight Elvey <elvey@hal.com>
- Re[2]:ATM a few questions
- From: Dwight Elvey <elvey@hal.com>
- RE[2]: ATM Re: Fork mount for 8" Newtonian, etc.
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["R R" <wjkkr@hotmail.com>]]
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Sagitta
- From: Dwight Elvey <elvey@hal.com>
- ATM extending the Foucault test length
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM A few questions
- From: Dwight Elvey <elvey@hal.com>
- Re[4]: ATM lap size was Re: Fork mount for 8" Newtonian, etc.
- From: Dwight Elvey <elvey@hal.com>
- ATM MTF's
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Chipped mirror
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Gugolz pitch, stroke, Ronchi questons
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Q re dichroic mirrors for color correcting a lens
- From: Dwight Elvey <elvey@hal.com>
- Re: Kingsport TN ATM classes
- From: Earl Needham <kd5xb@amsat.org>
- Re: ATM spiders - curved or straight
- From: "Ed Erbeck Jr." <ed@crazyedoptical.com>
- ATM sources for truss tubes in Bay Area?
- From: Ed Falk <Ed.Falk@eng.sun.com>
- ATM circle-cutting jig for router
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM Your Favorite Wood Glue
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM Sagitta
- From: Ed Falk <Ed.Falk@eng.sun.com>
- RE: ATM sources for truss tubes in Bay Area? -- summary
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM black paint to check out
- From: "Ed Hood" <aes@southwind.net>
- Re: ATM Sungazing for Newbies?
- From: "Ed Hood" <aes@southwind.net>
- ATM Mirrors in Russia???
- From: elfe@bigfoot.com (Elfe)
- ATM Aluminium mirrors
- From: elfe@bigfoot.com (Elfe)
- Re: ATM VIRUS WARNING is a hoax
- From: Eli Vandevoorde <elivv@efn.org>
- Re: ATM new scope... how light can we go ?
- From: Eli Vandevoorde <elivv@efn.org>
- ATM Re: how light can we go ?
- From: Eli Vandevoorde <elivv@efn.org>
- ATM Removing spherical aberration thru grinding.
- From: Eli Vandevoorde <elivv@efn.org>
- ATM TM magazine
- From: Eric Allen <ericallen@worldnet.att.net>
- ATM Re: Mirror,mirror
- From: Eric Allen <ericallen@worldnet.att.net>
- ATM Re: Recycling used carbo
- From: Eric Allen <ericallen@worldnet.att.net>
- ATM Re: Quick tool question
- From: Eric Allen <ericallen@worldnet.att.net>
- ATM Re: Purifying Used Carbo
- From: Eric Allen <ericallen@worldnet.att.net>
- ATM Stick a fork in it.
- From: "Eric Newell" <ewnewell@cetlink.net>
- Re: ATM Gluing Lexan
- From: "Ernest S. Tomlinson" <etomlins@k-online.com>
- ATM Torque Tube Mount
- From: "Fansler, David" <DFANSLER@autocyte.COM>
- RE: ATM Newbie need rough grinding advice
- From: "Fields, Jonathan A." <FIELDSJ@coned.com>
- ATM: Parts source for Mel's dob driver
- From: "Fields, Jonathan A." <FIELDSJ@coned.com>
- RE: ATM Paraboloid Paranoia
- From: "Fields, Jonathan A." <FIELDSJ@coned.com>
- RE: ATM Silvering and hogging
- From: "Fields, Jonathan A." <FIELDSJ@coned.com>
- RE: ATM Focuser Range
- From: "Fields, Jonathan A." <FIELDSJ@coned.com>
- FW: ATM Quick tool question
- From: "Fields, Jonathan A." <FIELDSJ@coned.com>
- RE: Another ATM scope sees the light of day....err night :-)
- From: "Fields, Jonathan A." <FIELDSJ@coned.com>
- ATM Lights on bridges
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Lights on bridges
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Sungazing for Newbies?
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM Focusser suggestions?
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Focal Ratio Question
- From: "Frank Ward" <thewards@pop.mindspring.com>
- Re: ATM Focal Ratio Question
- From: "Frank Ward" <thewards@pop.mindspring.com>
- Re: ATM Aluminum solder
- From: "Frank Ward" <thewards@pop.mindspring.com>
- Re: ATM First Steps
- From: "Frank Ward" <thewards@pop.mindspring.com>
- Re: ATM Junk material/mirror
- From: "Frank Ward" <thewards@pop.mindspring.com>
- Re: ATM TM Reprints
- From: "Frank Ward" <thewards@pop.mindspring.com>
- Re: ATM Junk material/mirror
- From: "Frank Ward" <thewards@pop.mindspring.com>
- Re: ATM Re: Fork mount for 8" Newtonian, etc.
- From: "Frank Ward" <thewards@pop.mindspring.com>
- Re: ATM Sungazing for Newbies?
- From: Frank Ward <thewards@pop.mindspring.com>
- ATM Re: Crazy Things
- From: Frank Ward <thewards@pop.mindspring.com>
- Re: ATM Woman Runs Away
- From: Frank Ward <thewards@pop.mindspring.com>
- Re: ATM Foucault Simulator
- From: Frank Ward <thewards@pop.mindspring.com>
- ATM Important People
- From: Frank Ward <thewards@pop.mindspring.com>
- Re: ATM My project almost destroyed
- From: Frank Ward <thewards@pop.mindspring.com>
- ATM cutting circles
- From: gary thomas <thomas@pld.com>
- ATM balancing
- From: gary thomas <thomas@pld.com>
- ATM MDF
- From: gary thomas <thomas@pld.com>
- ATM finder scope
- From: gary thomas <thomas@pld.com>
- Re: ATM Jigsaw Circles
- From: gary thomas <thomas@pld.com>
- ATM exterior MDF
- From: gary thomas <thomas@pld.com>
- ATM 40 Pounder
- From: Gary Wolanski <gary_wolanski@bc.sympatico.ca>
- ATM Shrouded In Mystery?
- From: Gary Wolanski <gary_wolanski@bc.sympatico.ca>
- ATM 40 Pounder Report ( First light)
- From: Gary Wolanski <gary_wolanski@bc.sympatico.ca>
- Re: ATM TM's # of subscribers
- From: gwoods@albany.net (Gary Woods)
- Re: ATM ...on homebuilt EQ mounts
- From: gwoods@albany.net (Gary Woods)
- Re: ATM Failures
- From: gwoods@albany.net (Gary Woods)
- Re: SV: ATM Focal Ratio question
- From: Gene Horr <genehorr@swbell.net>
- Re: ATM Temperature Equalization
- From: Gene Horr <genehorr@swbell.net>
- Re: ATM Re: RKE's vs. Nags..?
- From: Gene Horr <genehorr@swbell.net>
- ATM 'AO'
- From: Gene Horr <genehorr@swbell.net>
- Re: ATM Re: RKE's vs. Nags..?
- From: Gene Horr <genehorr@swbell.net>
- Re: ATM Refurbishing a 10" SCT
- From: Gene Horr <genehorr@swbell.net>
- Re: ATM Refurbishing a 10" SCT
- From: Gene Horr <genehorr@swbell.net>
- Re: ATM ...on homebuilt EQ mounts
- From: Gene Horr <genehorr@swbell.net>
- ATM looking for polar alignment software
- From: Gene Horr <genehorr@swbell.net>
- Re: ATM RC telescope design
- From: Gene Horr <genehorr@swbell.net>
- Re: ATM looking for polar alignment software
- From: Gene Horr <genehorr@swbell.net>
- Re: ATM RC telescope design
- From: Gene Horr <genehorr@swbell.net>
- Re: ATM PA Reticles
- From: Gene Horr <genehorr@swbell.net>
- Re: ATM RC telescope design (ramblings, long)
- From: Gene Horr <genehorr@swbell.net>
- ATM 12" horseshoe mount
- From: "Geoffrey William Dudley" <gdudley@swin.edu.au>
- Re: ATM Unexciting mounting questions
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Unexciting mounting questions
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Copyright
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Battery position
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM helium filled OTAs
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Gluing Lexan
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Re:Gluing lexan
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Gluing Lexan
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Gluing Lexan
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Aluminum solder
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Re:teflon delrin etc
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- ATM First Steps
- From: Gerd Friedrich Herzogenrath <gfh@fh-furtwangen.de>
- Re: ATM A few questions
- From: Gerd Friedrich Herzogenrath <gfh@fh-furtwangen.de>
- Re: ATM Measuring Sagitta
- From: Gert Jan Verhoog <gerti@xs4all.nl>
- ATM Can I use this glass?
- From: Gert Jan Verhoog <gerti@xs4all.nl>
- Re: ATM Dob Alt bearings
- From: Gert Jan Verhoog <gerti@xs4all.nl>
- Re: ATM Junk material/mirror
- From: Gert Jan Verhoog <gerti@xs4all.nl>
- Re: Ultimate ATM project.
- From: Gert Jan Verhoog <gerti@xs4all.nl>
- Re: ATM club rules
- From: gf <gforney@erols.com>
- Re: ATM Making Flats
- From: Gil Stacy <gstacy@premierweb.net>
- Re: ATM "Astroturf" substitutes from Home Depot
- From: Gil Stacy <gstacy@premierweb.net>
- Re: ATM Caustic tester questions
- From: Gil Stacy <gstacy@premierweb.net>
- Kingsport TN ATM classes
- From: Gil Stacy <gstacy@premierweb.net>
- ATM Unexciting mounting questions
- From: Glen Warchol <glenwarchol@sltrib.com>
- ATM Re: unexciting mounting question
- From: Glen Warchol <glenwarchol@sltrib.com>
- Re: ATM "Astroturf" substitutes
- From: Glen Warchol <glenwarchol@sltrib.com>
- Re: ATM Copyright
- From: Glen Warchol <glenwarchol@sltrib.com>
- Re: ATM Telescope Making and Kalmbach
- From: Glen Warchol <glenwarchol@sltrib.com>
- ATM Blackened edges?
- From: Glen Warchol <glenwarchol@sltrib.com>
- Re: ATM Shrouded In Mystery?
- ATM Ebony Star and Teflon
- From: Gordon Baldwin <gbaldw@illuminetss7.com>
- Re: ATM RIP, The Starry Messenger
- From: "Greg Babcock" <gregb@iccom.com>
- Re: ATM Torque Tube Mount
- From: "Greg Babcock" <gregb@iccom.com>
- Re: ATM Shrouded In Mystery?
- From: "Greg Babcock" <gregb@iccom.com>
- Re: ATM Shrouds still have a purpose
- From: "Greg Babcock" <gregb@iccom.com>
- ATM 2 inch filter threads - pitch?
- From: Greg Granville <greg@laser.arl.psu.edu>
- ATM atm Wood what kind?
- From: Greg Granville <greg@laser.arl.psu.edu>
- ATM Status-- 20" Cassegrain, longish
- Re: ATM Status-- 20" Cassegrain, longish
- Fwd: ATM Status-- 20" Cassegrain, longish
- Re: ATM Status-- 20" Cassegrain, longish
- Re: ATM Status-- 20" Cassegrain, longish
- Re: How large, how exotic (was- ATM Status-- 20" Cassegrain)
- ATM (no subject)
- ATM Re: How big how exotic
- Re: ATM How large how exotic
- ATM How Large, How exotic
- Re: ATM How Large, How exotic
- RE: ATM Caustic tester questions
- RE: ATM RC telescope design (ramblings, long)
- Re: ATM RC telescope design (ramblings, long)
- Re: ATM Re: University Optics [Long]
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM 20-25-30 inch
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM Dobson solar telescope?
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM Cutting round plywood bearing in half?
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM Cutting round plywood bearing in half?
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- ATM Re: Make Your Own Eyepieces
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM RC telescope design
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM atm junk material
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM Schmidt Happens.....
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM Re: OSLO Lt.
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: Another ATM scope sees the light of day....err night :-)
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- ATM fork mount
- From: "H-G Lindberg" <hans-goran.lindberg@vasteras.mail.telia.com>
- Re: ATM Re: atm-digest V1 #1355
- From: "Heermance, Martin" <Martin.Heermance@fmr.com>
- Re: ATM Sagitta
- From: "Hennecke, Marcus Dr." <Marcus.Hennecke@vs.dasa.de>
- Re: ATM Sagitta
- From: "Hennecke, Marcus Dr." <Marcus.Hennecke@vs.dasa.de>
- re:ATM Measuring Sagitta
- From: "Howard Banich" <Howard.Banich@nike.com>
- re:Re: ATM A few questions
- From: "Howard Banich" <Howard.Banich@nike.com>
- Re: ATM Black and Decker Workmate for a barrel?
- From: Hugues_Laroche@aia.com
- ATM reply to hogging out troubles
- From: Hugues_Laroche@aia.com
- ATM Diffraction ring or thin TDE?
- From: Hugues_Laroche@ses-astra.com
- Re: ATM RC telescope design
- From: Hugues_Laroche@ses-astra.com
- Re: ATM RC telescope design
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Dob Alt bearings
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Telescope Making and Kalmbach
- From: Hugues_Laroche@ses-astra.com
- Re: ATM stuck mirror and tool
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Chipped mirror
- From: Hugues_Laroche@ses-astra.com
- RE: ATM Sungazing for Newbies?
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Newbie Mirror-Chipper?
- From: Hugues_Laroche@ses-astra.com
- ATM First Light!
- From: "Hutcheson" <jchutch@ne.mediaone.net>
- Re: ATM new scope... how light can we go ?
- From: "Hutcheson" <jchutch@ne.mediaone.net>
- Re: ATM Squaring the focuser
- From: iss@pvtnetworks.net
- Re: ATM Can I use this glass?
- From: iss@pvtnetworks.net
- Re: ATM atm Wood what kind?
- From: iss@pvtnetworks.net
- Re: ATM Focal Ratio question
- From: iss@pvtnetworks.net
- Re: ATM Dobson solar telescope?
- From: iss@pvtnetworks.net
- Re: ATM Cutting round plywood bearing in half?
- From: iss@pvtnetworks.net
- Re: ATM Dobson solar telescope?
- From: iss@pvtnetworks.net
- Re: ATM Camera Lenses as Eyepieces
- From: iss@pvtnetworks.net
- Re: How large, how exotic (was- ATM Status-- 20" Cassegrain)
- From: iss@pvtnetworks.net
- Re: ATM Temperature Equalization
- From: iss@pvtnetworks.net
- Re: ATM Paraboloid Paranoid
- From: iss@pvtnetworks.net
- Re: ATM Re-greasing equatorial mount
- From: iss@pvtnetworks.net
- RE: How large, how exotic (was- ATM Status-- 20" Cassegrain)
- From: iss@pvtnetworks.net
- Re: SV: ATM Paracorr (coma correctors) for specific focal lenghts
- From: iss@pvtnetworks.net
- Re: Re[2]: ATM Paraboloid Paranoid
- From: iss@pvtnetworks.net
- Re: ATM Re-greasing equatorial mount
- From: iss@pvtnetworks.net
- Re: ATM Equatorial Platform - Errata, spreadsheet, and email address
- From: iss@pvtnetworks.net
- Re: ATM Torque Tube Mount
- From: iss@pvtnetworks.net
- Re: ATM RC telescope design
- From: iss@pvtnetworks.net
- Re: ATM RC telescope design
- From: iss@pvtnetworks.net
- Re: ATM RC telescope design
- From: iss@pvtnetworks.net
- ATM Re: HST
- From: iss@pvtnetworks.net
- Re: ATM Concrete Pier Over-Kill?
- From: iss@pvtnetworks.net
- Re: ATM "Flats" for Autocollimation Null Testing
- From: iss@pvtnetworks.net
- Re: ATM Hartmann test info (long)
- From: iss@pvtnetworks.net
- Re: ATM spiders - curved or straight
- From: iss@pvtnetworks.net
- Re: SV: ATM spiders - curved or straight
- From: iss@pvtnetworks.net
- Re: ATM Catalogs
- From: "J. v. Gastel" <m043653@home.vu.nl>
- Re: ATM Quality of commercial secondary mirrors?
- From: "J. v. Gastel" <m043653@home.vu.nl>
- Re: ATM Quality of commercial secondary mirrors?
- From: "J. v. Gastel" <m043653@home.vu.nl>
- Re: ATM 20-25-30 inch
- From: "J. v. Gastel" <m043653@home.vu.nl>
- Re: ATM Equatorial Platform - Errata, spreadsheet, and email address
- From: "J. v. Gastel" <m043653@home.vu.nl>
- Re: ATM Equatorial Platform - Errata, spreadsheet, and email address
- From: "J. v. Gastel" <m043653@home.vu.nl>
- Re: ATM Mirror fix
- From: jerry@cts4.europe.dg.com (j.royston)
- ATM Black and Decker Workmate for a barrel?
- From: jerry@cts4.europe.dg.com (j.royston)
- Re: ATM Chip Question
- From: "Jack Brindle" <jackb@ricochet.net>
- ATM Spherometer
- From: James P Crombie <jpcrombie@pei.sympatico.ca>
- ATM Sky and Tel Article
- From: James P Crombie <jpcrombie@pei.sympatico.ca>
- ATM Dental plaster
- From: James P Crombie <jpcrombie@pei.sympatico.ca>
- ATM Re; 32 INCH Not melting ,but fusing
- From: James P Crombie <jpcrombie@pei.sympatico.ca>
- ATM Dental Stone
- From: James P Crombie <jpcrombie@pei.sympatico.ca>
- ATM Re:Gluing lexan
- From: James P Crombie <jpcrombie@pei.sympatico.ca>
- ATM Lapping machine
- From: James P Crombie <jpcrombie@pei.sympatico.ca>
- ATM Re:teflon delrin etc
- From: James P Crombie <jpcrombie@pei.sympatico.ca>
- ATM Re: prism
- From: James P Crombie <jpcrombie@pei.sympatico.ca>
- Re: ATM Newbie need rough grinding advice
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM mirror mirror on the wall
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM extended Foucault test
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM And the Winners Are...
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Millies-Lacroix spreadsheet
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Stick a fork in it.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM RC telescope design
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM RC telescope design
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM RC telescope design (ramblings, long)
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Foucault Test Simulator
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: SV: ATM spiders - curved or straight
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM MTF's
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM quick figuring ?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Foucault Simulator
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM Regreasing
- From: Jay LeBlanc <jaleblan@dakotacom.net>
- Re: ATM Magnetometers
- From: Jay LeBlanc <jaleblan@dakotacom.net>
- ATM ID of Sigma Stepper?
- From: Jay LeBlanc <jaleblan@dakotacom.net>
- ATM foucault test
- From: Jean Claude Amacher <jamacher@club-internet.fr>
- ATM Thin glass, thick plaster
- From: jgmoreau@lino.com (Jean-Guy Moreau)
- Re: ATM Thin glass, thick plaster
- From: jgmoreau@lino.com (Jean-Guy Moreau)
- Re: ATM Thin glass, thick plaster
- From: jgmoreau@lino.com (Jean-Guy Moreau)
- ATM Ribbed blanks
- From: jgmoreau@lino.com (Jean-Guy Moreau)
- Re: ATM Ribbed blanks
- From: jgmoreau@lino.com (Jean-Guy Moreau)
- ATM Ribbed blanks , CORRECTION
- From: jgmoreau@lino.com (Jean-Guy Moreau)
- Re: ATM Ribbed blanks , CORRECTION
- From: jgmoreau@lino.com (Jean-Guy Moreau)
- RE: ATM Cave Herring Mirror
- From: jgmoreau@lino.com (Jean-Guy Moreau)
- Re: Another ATM scope sees the light of day....err night :-)
- From: jgmoreau@lino.com (Jean-Guy Moreau)
- ATM Stupid question
- From: "Jeff" <jhudson@inreach.com>
- Re: ATM 38"glass/cutting/slumping/etc
- From: "Jeff Baldwin" <bald@gotnet.net>
- ATM: glass spherometer
- From: "Jeff Baldwin" <bald@gotnet.net>
- ATM: burning eyes
- From: "Jeff Baldwin" <bald@gotnet.net>
- ATM: prism
- From: "Jeff Baldwin" <bald@gotnet.net>
- Re: ATM first 20"
- From: Jeff Klink <jklink@calwest.net>
- Re: ATM Re:Gluing lexan
- From: Jeff Klink <jklink@calwest.net>
- Re: ATM Digital setting circle units...
- From: Jeff Klink <jklink@calwest.net>
- Re: ATM Re: Red Cellophane For Digital Setting Circles, Flashlights, etc.
- From: Jeff Klink <jklink@calwest.net>
- ATM Starfinder Drive Improvements
- From: "Jeff MacQuarrie" <jamacq@erols.com>
- RE: ATM CCD Cookbook (camera window)
- From: "Jeff MacQuarrie" <jamacq@erols.com>
- ATM Drive Upgrade
- From: "Jeff MacQuarrie" <jamacq@erols.com>
- ATM Building an 8"...advice needed
- From: "Jeff MacQuarrie" <jamacq@erols.com>
- RE: ATM mail bomb
- From: "Jeff MacQuarrie" <jamacq@erols.com>
- RE: ATM Sungazing for Newbies?
- From: "Jeff MacQuarrie" <jamacq@erols.com>
- Re: ATM "Astroturf" substitutes from Home Depot
- From: Jeff Medkeff <medkeff@c2i2.com>
- Re: ATM "Astroturf" substitutes from Home Depot
- From: Jeff Medkeff <medkeff@c2i2.com>
- ATM SCT Temperature experiments
- From: Jeff Medkeff <medkeff@c2i2.com>