[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Powder coaters

Thanks. I was planning to cut the holes a bit oversized (~1/8" larger  
in diameter?) and not do any masking. There would still be work to  
clean it, I assume.

And yes, I wasn't planning on installing the liner until after powder  
coating.

Bill

On Nov 16, 2007, at 8:00 AM, Don Ware wrote:

>
> I had a 6" X 15" tube powder coated in southern New Hampshire  
> several years ago.  Cost was about $80.  As a lot of the charge will  
> be for setup, don't think your larger tube will be several times  
> that.  A lot will depend upon how much masking the coater needs to do.
>
> BTW, powder coating involves high heat, so don't do the inside liner  
> until after the powder coating.
>
>
> Don Ware
> http://webpages.charter.net/dware1/

_______________________________________________
ATM mailing list http://www.atmlist.net/