Re: [ATM] Turned Down Edge (was Varathane)

[Curt Diggs <mokiman_210@yahoo.com>]

While using Monokote is possible I would save that as a last resort, if all else fails.
   
  Unless you have some experience with Monokote or similar coverings I would think twice before trying this. Having covered literally hundreds of model aircraft of every size and description with the stuff for many years, I know that it can be a real pain to get a decent job, expecially over flat or smooth closed surfaces such as telescope tubes. The skills required to get a good covering job with this stuff are not trivial and come only with practice.
   
  Curt Diggs
   
  >Message: 21
>Date: Sun, 11 Nov 2007 16:04:37 -0800
>From: "Bob May" <rmay@nethere.com>
>Subject: Re: [ATM] Turned Down Edge (was Varathane)
>To: <atm@atmlist.net>
>Message-ID: <000e01c824bf$9df9b3c0$ddadfea9@amd>
>Content-Type: text/plain; charset="iso-8859-1"
  >You might want to stop by the model airplane shop and pick up
>some Monocoat or similar stuff and coat it with that.  It's a
>plastic film that you apply to the surface of a wing or such on
>model airplanes and is nice and shiney and does a good job of
>making things nice and beautiful.  You do need to have a smooth
>surface to put it on gho as it will telegraph any defects through
>to the surface.
>Bob May


 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
ATM mailing list http://www.atmlist.net/