Re: [ATM] tile tool sticking

["Norm Prince" <princenorman@bellsouth.net>]

Others on the list could give you better insight into water-grit ratios than 
i can, but i will mention from my experience (which is almost jack) that i 
find i get a good bit of funky-ness and resistence when switching grits no 
mater how on target i think i am as far as spherocity goes...the way i 
explain this is that you can only be spherical within the limits of the grit 
size...that is to say for something like 80 grit...you can only get 
spherical within one 80th of an inch...plus or minus...thats a lot of slop 
when you want to measure 1000ths of an inch...furthermore this effect seems 
to manifest itself in sticking and jerkiness when you start using smaller 
and smaller grits...keep grinding with your 1/3...or normal stroke...it will 
probably work itself out before you read this email...lol...of course this 
is just one inexperienced dude talking to another...so please correct me 
yall if i'm wrong...

Norm Prince

----- Original Message ----- 
From: "horace r davis" <hrd9@juno.com>
To: <atm@atmlist.net>
Sent: Friday, November 02, 2007 21:41 PM
Subject: [ATM] tile tool sticking


>I started with wao 5 after a week break and the tool and mirror keep
> sticking together after two wetting it started to  move smooth does the
> tiles dry out and need to be re socked
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
> 


_______________________________________________
ATM mailing list http://www.atmlist.net/