[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Pitch Substitute for very fast mirrors

To: <atm@atmlist.net>
Subject: Re: [ATM] Pitch Substitute for very fast mirrors
From: "Greg Jones" <gregj888@comcast.net>
Date: Wed, 22 Nov 2006 10:42:04 -0800
Delivered-to: atm_arc@astro.umsystem.edu
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

At one of the Bellingham workshops there was a presentation that discussed fast mirrors.  Seems like the lap was built up from the tool substrate, layer of rubber, thin metal (SS or brass) then pitch.  Anyone out there remember the presentation, or better yet have a copy?


Greg Jones
http://home.comcast.net/~dac20/dac_001.htm
_______________________________________________
ATM mailing list http://www.atmlist.net/

Prev by Author: [ATM] Oversize tools questions - was Pitch Substitute for very fast mirrors
Next by Author: [ATM] looking for illustrations of different telescope.
Previous by thread: Re: [ATM] Pitch Substitute for very fast mirrors
Next by thread: [ATM] Polarizing filters versus neutral density filters
Index(es):
- Author
- Thread