[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Pitch Substitute for very fast mirrors

To: <atm@atmlist.net>
Subject: Re: [ATM] Pitch Substitute for very fast mirrors
From: "Mel Bartels" <mbartels@bbastrodesigns.com>
Date: Tue, 21 Nov 2006 13:10:10 -0800
Delivered-to: atm_arc@astro.umsystem.edu
Importance: Normal
In-reply-to: <000701c70db0$3ae7bf60$6601a8c0@dmp>
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

> I'm finishing a 13 inch f/3 (39 inch focal length).  I am not experiencing
> any extraordinary problems using Gugolz 55 pitch.
> 
> Just a smart-alex question from a newbie, what size is your tool?


Tool diameter is 15 inches - I use oversized polishing (and occasionally for
figuring) tools.

Mel Bartels


_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- [ATM] Oversize tools questions - was Pitch Substitute for very fast mirrors
  - From: GF <gary@rcn.com>

References:
- Re: [ATM] Pitch Substitute for very fast mirrors
  - From: "Mitch" <funnybone101@earthlink.net>

Prev by Author: Re: [ATM] Pitch Substitute for very fast mirrors
Next by Author: Re: [ATM] Pitch Substitute for very fast mirrors
Previous by thread: Re: [ATM] Pitch Substitute for very fast mirrors
Next by thread: [ATM] Oversize tools questions - was Pitch Substitute for very fast mirrors
Index(es):
- Author
- Thread