Amateur Telescope Makers (ATM) Archive for NOV06 - by author

• Thread Index

• Re: [ATM] mirror box baffle question
  • From: Alexis Cousein <al@sgi.com>
• [ATM] 20incher with segmented and ribbed mirror at 12Kg
  • From: "Andreas Derwahl" <andreas@duda-derwahl.de>
• Re: [ATM] 20incher with segmented and ribbed mirror at 12Kg
  • From: "Andreas Derwahl" <andreas@duda-derwahl.de>
• Re: [ATM] 20incher with segmented and ribbed mirror at 12Kg
  • From: "Andreas Derwahl" <andreas@duda-derwahl.de>
• Re: [ATM] Lateral mirror support test cases measured
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Fwd: Pressing was Re: Oversize tools questions
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: "Bob Drew" <gofast3@hotmail.com>
• [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: "Bob Drew" <gofast3@hotmail.com>
• [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: "Bob Drew" <gofast3@hotmail.com>
• [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: "Bob Drew" <gofast3@hotmail.com>
• Re: [ATM] New to list, I want to make my own mirror
  • From: Brian William Bainbridge <brianb@u.washington.edu>
• [ATM] 22-inch binocular enclosure
  • From: "Bruce Sayre" <sayre@foothill.net>
• [ATM] Last word in minimalism
  • From: "Bruce Sayre" <sayre@foothill.net>
• [ATM] Preparing to trepan for the first time
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• Re: [ATM] Preparing to trepan for the first time
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• Re: [ATM] Preparing to trepan for the first time - Success!
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• Re: [ATM] Shutting Down the Night Sky
  • From: Chris Rowland <chris_group_mail@dsl.pipex.com>
• [ATM] Cementing the core back in place
  • From: "Christopher Dalla Piazza" <dalchri@hotmail.com>
• [ATM] The ding, the inteferogram, and the analysis
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Pressing was Re: Oversize tools questions
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] An update on our mirror.........
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Lateral mirror support test cases measured with interferometer.
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Determining ideal truss tube dimentions
  • From: "Dan Doyle" <starmandan@hotmail.com>
• Re: [ATM] ATM Movie
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Mercury Transit
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] DC Motor for grinding machine question
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Preparing to trepan for the first time
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Shutting Down the Night Sky
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] looking for illustrations of different telescope.
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] looking for illustrations of different telescope.
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] ATM Movie
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] ATM Movie
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] powerpoint file link fixed!
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] SolidWorks 3D Instant Website - Tri-dobFull Assembly
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] mirror box baffle question
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] SM4
  • From: "Dave Tabor" <david@tabor.com>
• [ATM] Fw: looking for illustrations of different telescope.
  • From: "Dave Tabor" <david@tabor.com>
• [ATM] Mercury Transit
  • From: "Dave Tabor" <david@tabor.com>
• Re: [ATM] DC Motor for grinding machine question
  • From: "Dave Tabor" <david@tabor.com>
• Re: [ATM] New to list, I want to make my own mirror
  • From: David Nicholls <dcn@dcnicholls.com>
• Re: [ATM] Documentary film on ATM
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Documentary film on ATM
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] ATM Movie
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] ATM Movie
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Voice coil actuators
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Voice coil actuators
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Voice coil actuators
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] The last public Star Party at Chiefland , Florida
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] An Ancient Computer Surprises Scientists
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] Russell Porter and Griffith coelostat
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Help in moving my secondary
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] DC Motor for grinding machine question
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] DC Motor for grinding machine question
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] DC Motor for grinding machine question
  • From: "Don Clement" <don_clement@charter.net>
• [ATM] Polihing turntable bearings
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Polihing turntable bearings
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] DC Motor for grinding machine question
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] DC Motor for grinding machine question
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] DC Motor for grinding machine question
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Dremel Tools and water
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machinequestion
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Voice coil actuators
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Voice coil actuators
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Metal Laser treatment.
  • From: "Don Clement" <don_clement@charter.net>
• [ATM] Fast Astrograph Considerations
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] New to list, I want to make my own mirror
  • From: Don R Surles <Don.R.Surles-1@usa.dupont.com>
• Re: [ATM] ATM Movie
  • From: Don R Surles <Don.R.Surles-1@usa.dupont.com>
• Re: [ATM] [atm_free] Rush into F3.5
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] mirror box baffle question
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• [ATM] ATM Movie
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] Voice coil actuators
  • From: Frank Billig <Frank.Billig@gmx.de>
• Re: [ATM] DC Motor for grinding machine question
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] DC Motor for grinding machine question
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] DC Motor for grinding machine question
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Shutting Down the Night Sky
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Spectra Systems SureSharp
  • From: George Anderson <tillerman1@videotron.ca>
• [ATM] Oversize tools questions - was Pitch Substitute for very fast mirrors
  • From: GF <gary@rcn.com>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: "Greg Jones" <gregj888@comcast.net>
• [ATM] looking for illustrations of different telescope.
  • From: "Harro Treur" <Harro.Treur@waternet.nl>
• Re: [ATM] ATM Movie
  • From: Otterstedt@t-online.de (Heiner Otterstedt)
• Re: [ATM] SM4
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] SM4
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] looking for illustrations of different telescope.
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] ATM Movie
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] is mirror thermal equilibrium important
  • From: "Jack Swaton @ Starry Host" <jswaton@starryhost.com>
• Re: [ATM] After a layoff of 3 yrs or so.............
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] Polarizing filters versus neutral density filters
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] Voice coil actuators was: DC Motor for grindingmachinequestion
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] The last public Star Party at Chiefland , Florida
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• [ATM] ATM movies!!
  • From: "jamoore47" <JohnMoore47@mail2web.net>
• [ATM] ATM-movies #2.
  • From: "jamoore47" <JohnMoore47@mail2web.net>
• Re: [ATM] SolidWorks 3D Instant Website - Tri-dobFull Assembly
  • From: "jamoore47" <JohnMoore47@mail2web.net>
• Re: [ATM] Edge polish - when to call it good
  • From: "jamoore47" <JohnMoore47@mail2web.net>
• Re: [ATM] Pressing was Re: Oversize tools questions
  • From: Jan Bentz <jbentz@inreach.com>
• [ATM] invitation
  • From: "Jan Grecner" <jan.grecner@telecom.cz>
• [ATM] test
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Preparing to trepan for the first time
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] Spectra Systems SureSharp
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] SM4
  • From: Jeff Rowe <jroweapp@swbell.net>
• Re: [ATM] Shutting Down the Night Sky
  • From: Jeff Rowe <jroweapp@swbell.net>
• Re: [ATM] Shutting Down the Night Sky
  • From: Jeff Rowe <jroweapp@swbell.net>
• Re: [ATM] A bit of hand polishing advice please................
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] A bit of hand polishing advice please................
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] A bit of hand polishing advice please................
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] Obelate, dang,,,
  • From: "j h" <quantemlp@hotmail.com>
• Re: [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Determining ideal truss tube dimentions
  • From: Jim McPherson <jim@eflightproducts.com>
• [ATM] New to list, I want to make my own mirror
  • From: "JM O'Neill" <hanabi@cox.net>
• [ATM] After a layoff of 3 yrs or so.............
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• [ATM] A bit of hand polishing advice please................
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• Re: [ATM] A bit of hand polishing advice please................
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• Re: [ATM] A bit of hand polishing advice please................
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• Re: [ATM] A bit of hand polishing advice please................
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• [ATM] An update on Manuels mirror...........
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• [ATM] An update on our mirror.........
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• Re: [ATM] An update on our mirror.........
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• [ATM] Updated pictures of 8"f6 mirror............
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• Re: [ATM] SM4
  • From: John Lynch <john_lynch2006@yahoo.com>
• Re: [ATM] SM4
  • From: John Lynch <john_lynch2006@yahoo.com>
• [ATM] Polarizing filters versus neutral density filters
  • From: John Lynch <john_lynch2006@yahoo.com>
• Re: [ATM] Best locations for 4-Pt. Wiffletree edge support PLS
  • From: "John Sherman" <atmer@johnspics.com>
• Re: [ATM] mirror box baffle question
  • From: "John Sherman" <atmer@johnspics.com>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "John Sherman" <atmer@johnspics.com>
• Re: [ATM] 20incher with segmented and ribbed mirror at 12Kg
  • From: "John Sherman" <atmer@johnspics.com>
• Re: [ATM] Lateral mirror support test cases measured withinterferometer.
  • From: "John Sherman" <atmer@johnspics.com>
• Re: [ATM] Lateral mirror support test cases measured
  • From: "John Sherman" <atmer@johnspics.com>
• [ATM] The warp factor on the digital setting circle.
  • From: john smith <darkspace1234@yahoo.com>
• Re: [ATM] Help in moving my secondary
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] DC Motor for grinding machine question
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] Pitch Substitute for very fast mirrors
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] New to list, I want to make my own mirror
  • From: "lance clarke" <alaskawolfjoe@hotmail.com>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: [ATM] Preparing to trepan for the first time
  • From: <lenses@adelphia.net>
• Re: [ATM] Preparing to trepan for the first time
  • From: <lenses@adelphia.net>
• [ATM] Documentary film on ATM
  • From: Mahmood Hassan <emhl95@yahoo.com>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• [ATM] Metal Laser treatment.
  • From: "Marco" <marco.miglionico@btinternet.com>
• Re: [ATM] SM4
  • From: "Marinus van der Lugt" <lugt@xs4all.nl>
• Re: [ATM] New to list, I want to make my own mirror
  • From: "Marinus van der Lugt" <lugt@xs4all.nl>
• [ATM] Edge polish - when to call it good
  • From: "Mark" <MarkSKowalski@comcast.net>
• Re: [ATM] New to list, I want to make my own mirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] New to list, I want to make my own mirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] New to list, I want to make my own mirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] mirror box baffle question
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Polarizing filters versus neutral density filters
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Polarizing filters versus neutral density filters
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] mirror box baffle question
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] ATM Dremel diamonds
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] A bit of hand polishing advice please................
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] A bit of hand polishing advice please................
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] is mirror thermal equilibrium important
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] ATM Movie
  • From: matt@considine.net
• [ATM] Fwd: Pressing was Re: Oversize tools questions
  • From: "Matthew Fuchs" <matthew.fuchs@gmail.com>
• Re: [ATM] New to list, I want to make my own mirror
  • From: "Max Mirot" <maxmirot@charter.net>
• Re: [ATM] New to list, I want to make my own mirror
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Documentary film on ATM
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] [atm_free] Rush into F3.5
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] mirror box baffle question
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Oversize tools questions - was Pitch Substitute for very fast mirrors
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Oversize tools questions - was Pitch Substitute forveryfast mirrors
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Oversize tools questions - was PitchSubstituteforveryfast mirrors
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Oversize tools questions - wasPitchSubstituteforveryfastmirrors
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Pressing was Re: Oversize tools questions
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Fwd: Pressing was Re: Oversize tools questions
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Pressing was Re: Oversize tools questions
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Fwd: Pressing was Re: Oversize tools questions
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] 20incher with segmented and ribbed mirror at 12Kg
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• [ATM] What happened to Bob May?
  • From: "Michael Koch" <astroelectronic@t-online.de>
• Re: [ATM] Bob May
  • From: "Michael Koch" <astroelectronic@t-online.de>
• Re: [ATM] New to list, I want to make my own mirror
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] DC Motor for grinding machine question
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] DC Motor for grinding machine question
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] DC Motor for grinding machine question
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] DC Motor for grinding machine question
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] After a layoff of 3 yrs or so.............
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] mirror box baffle question
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] The last public Star Party at Chiefland , Florida
  • From: Michael Lindner <mikell@optonline.net>
• [ATM] Shutting Down the Night Sky
  • From: Michael Wheatley <mwheatley@telus.net>
• Re: [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: Michael Wheatley <mwheatley@telus.net>
• [ATM] Dremel Tools and water
  • From: Michael Wheatley <mwheatley@telus.net>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: Michael Wheatley <mwheatley@telus.net>
• Re: [ATM] Help in moving my secondary
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Fixing oblate sphere (fix oblate spheroid)
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] After a layoff of 3 yrs or so.............
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] DC Motor for grinding machine question
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] DC Motor for grinding machine question
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Cassegrain information page
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] SM4
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Documentary film on ATM
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Obelate, dang,,,
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Edge polish - when to call it good
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: "Mitch" <funnybone101@earthlink.net>
• [ATM] FW: Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] A bit of hand polishing advice please................
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Oversize tools questions - was Pitch Substitute for veryfast mirrors
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Oversize tools questions - was Pitch Substituteforveryfast mirrors
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Oversize tools questions - was PitchSubstituteforveryfastmirrors
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Oversize tools questions -wasPitchSubstituteforveryfastmirrors
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Polarizing filters versus neutral density filters
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] mirror box baffle question
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] looking for illustrations of different telescope.
  • From: Pete <lenses@adelphia.net>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: Pete <lenses@adelphia.net>
• Re: [ATM] Last word in minimalism
  • From: "Peter" <peter@kitgear.com>
• [ATM] DC Motor for grinding machine question
  • From: polaraligned <polaraligned@optonline.net>
• [ATM] Best locations for 4-Pt. Wiffletree edge support PLS
  • From: polaraligned <polaraligned@optonline.net>
• Re: [ATM] SM4
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] SM4
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] New to list, I want to make my own mirror
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Documentary film on ATM
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] DC Motor for grinding machine question
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] DC Motor for grinding machine question
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] DC Motor for grinding machine question
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Polihing turntable bearings
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Shutting Down the Night Sky
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] ATM Dremel diamonds
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Voice coil actuators was: DC Motor for grinding machine question
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: Richard <cnc@cncservo.co.uk>
• [ATM] Successive Approximation
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] 20incher with segmented and ribbed mirror at 12Kg
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] 20incher with segmented and ribbed mirror at 12Kg
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] DC Motor for grinding machine question
  • From: "Robert Mohr" <rmohr@tiwcorp.com>
• [ATM] DC Motor for grinding machine question
  • From: "Rod Brackenridge" <rjbr@gawab.com>
• Re: [ATM] DC Motor for grinding machine question
  • From: "Rod Brackenridge" <rjbr@gawab.com>
• Re: [ATM] DC Motor for grinding machine question
  • From: "Rod Brackenridge" <rjbr@gawab.com>
• [ATM] SM4
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] Help in moving my secondary
  • From: RP Sutton <rp@suttonsonline.us>
• Re: [ATM] Help in moving my secondary
  • From: RP Sutton <rp@suttonsonline.us>
• [ATM] The last public Star Party at Chiefland , Florida
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] ATM Large Binocular Telescope
  • From: "The Alarm Co." <tac@i1.net>
• [ATM] ATM Dremel diamonds
  • From: "The Alarm Co." <tac@i1.net>
• [ATM] Thin slumped mirror blanks.
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] New to list, I want to make my own mirror
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Documentary film on ATM
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Documentary film on ATM
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Bob May
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Mercury Transit
  • From: Tom Conlin <tomc@cs.uoregon.edu>
• Re: [ATM] Pitch Substitute for very fast mirrors
  • From: Tom Fredrickson <newsforfred@comcast.net>
• Re: [ATM] Documentary film on ATM
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Last word in minimalism
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• [ATM] Off topic: humidifier and salt buildup
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• [ATM] Rush into F3.5
  • From: Ukyo Chen <ukyochen888@hotmail.com>
• Re: [ATM] [atm_free] Rush into F3.5
  • From: Ukyo Chen <ukyochen888@hotmail.com>
• Re: [ATM] [atm_free] Rush into F3.5
  • From: Ukyo Chen <ukyochen888@hotmail.com>
• Re: [ATM] [atm_free] Rush into F3.5
  • From: Ukyo Chen <ukyochen888@hotmail.com>
• Re: [ATM] Rush into F3.5
  • From: Ukyo Chen <ukyochen888@hotmail.com>
• [ATM] F2.5 hyperbolic mirror for photograph.
  • From: Ukyo Chen <ukyochen888@hotmail.com>
• Re: [ATM] Documentary film on ATM
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] ATM Movie
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] Voice coil actuators was: DC Motor for grindingmachine question
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] Updated pictures of 8"f6 mirror............
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• [ATM] Bob May
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• [ATM] is mirror thermal equilibrium important
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• [ATM] An Ancient Computer Surprises Scientists
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] Rush into F3.5
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] New to list, I want to make my own mirror
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] New to list, I want to make my own mirror
  • From: William Marriott <bmarriott@pacbell.net>