[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: [ATM] Mirror Cells - Springs vs. Push/Pull
>From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
>> However, I still don't know what Don's flexural U joint looks like in his
>> collimation cell....
>I guess that you could make those for example by making cuts with a hacksaw
>on opposite sides of the screw, almost meeting eachother at the center.
>Repeat the process 1mm along the screw, but at 90deg angle. The result is a
>cross-coupling which gives some flexing but keeps axial position.....
Thank you! This sounds reasonable, and fairly easy to accomplish!
Tom Krajci
Cloudcroft, New Mexico
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.8/184 - Release Date: 11/27/2005
_______________________________________________
ATM mailing list http://www.atmlist.net/