[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Telescope making software

To: MARIE STANTON <lgk@rogers.com>
Subject: Re: [ATM] Telescope making software
From: George Anderson <tillerman1@videotron.ca>
Date: Tue, 22 Nov 2005 22:24:13 -0500
Cc: atm@atmlist.net
List-Archive: <http://www.atmlist.net/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <004201c5ef84$1c4e1d10$adc7c745@DESKTOP>
Sender: atm-bounces@atmlist.net

Gerald

Have a look at Satn Kohut's web page on making your own fibreglass tube
http://www.geocities.com/natsp2000/fiberglass-tube.html
As a side note has anyone heard from Stan in the last few years?

George Anderson
Montreal Canada

Clear skies and good health

MARIE STANTON wrote:
> 
> Daniel Fundo:
> 
>  I will probably build a grinding machine in the future, but my first telescope will be an 8".  I just wanted to know the limits of doing it by hand.  I'm going to be doing the tube and dob mount out of fiberglass.  I don't see any companies that sell fiberglass scope tubes, why?
> 
> Gerald
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Telescope making software
  - From: "Peter" <peter@kitgear.com>

References:
- Re: [ATM] Telescope making software
  - From: "MARIE STANTON" <lgk@rogers.com>

Prev by Author: [ATM] Temperature sensing
Next by Author: Re: [ATM] New 16" telescope design
Prev by thread: Re: [ATM] Telescope making software
Next by thread: Re: [ATM] Telescope making software
Index(es):
- Author
- Thread