[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Recognising TDE

To: "'Mike Lockwood'" <melockwo@uiuc.edu>, <atm@atmlist.net>
Subject: Re: [ATM] Recognising TDE
From: "James Mulherin" <jcmulherin@opticalmechanics.com>
Date: Tue, 8 Nov 2005 15:45:41 -0600
In-Reply-To: <4370D175.6040404@uiuc.edu>
List-Archive: <http://www.atmlist.net/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net
Thread-Index: AcXkgPsf81WLy70TQruEYTcW3hJH6gALC+gQ

Mike:

 
> A point of terminology - I define the edge as the outer ~1/16" of the
> mirror, and I have never seen a true TUE by this definition.  However,
> I have seen plenty of "turned up outer zones", or undercorrected outer
> zones, 1/4" and wider.
> 
> James, you've made more mirrors than me - ever seen a true TUE by that
> definition?

No, can't say that I have.

James

James Mulherin
Optical Mechanics, Inc.
jcmulherin@opticalmechanics.com
www.opticalmechanics.com
Tel: (319) 351-3960
Fax: (319) 351-3943


_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Recognising TDE
  - From: "Jeff Baldwin" <bald@centurytel.net>

References:
- Re: [ATM] Recognising TDE
  - From: Mike Lockwood <melockwo@uiuc.edu>

Prev by Author: Re: [ATM] Recognising TDE
Next by Author: [ATM] File attachments
Prev by thread: Re: [ATM] Recognising TDE
Next by thread: Re: [ATM] Recognising TDE
Index(es):
- Author
- Thread