Re: [ATM] glue

[DHA352@aol.com]

In a message dated 11/29/2004 7:00:22 PM Eastern Standard Time,  
purohit9@elp.rr.com writes:

I am  trying to build a wind protector for outdoor observation using PV tubes 
and  4mil clear plastic sheets, and having problem to glue the plastic. 
Gorilla  glue, elmar's glue and guct tape are no good . Could any body suggest the 
glue  which might work.  Krish
..............................................................................
..............................................................................
...............................
....the  U.S. remains the story to beat all  stories.........
_______________________________________________
ATM  mailing list http://www.atmlist.net/



The nylon or sailcloth ideas are good ones, but, if you have already  
invested in the plastic sheets that doesn't help much.  To "glue" plastic  sheeting 
you need the associated solvent.  If you know the type of plastic  search the 
web, if not take a sample to a nearby plastic fabricating shop and  ask what 
solvent to use.  They may be able to sell you a small  amount.  To use it lay 
out two sheets on a CLEAN surface apply a SMALL  amount to both surfaces (I used 
an artist's brush) and use a wallpaper  roller to squeeze the sheets 
together.  Good luck.
 
Don
 
 
_______________________________________________
ATM mailing list http://www.atmlist.net/