[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] re: Working with thin mirrors

To: Ellen Mackenzie <mackenzieconsulting@sympatico.ca>
Subject: Re: [ATM] re: Working with thin mirrors
From: George Anderson <georgea@cam.org>
Date: Sat, 27 Nov 2004 23:11:38 -0500
Cc: atm <atm@atmlist.net>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <003601c4d4bf$af5c2470$0f02a8c0@mackenzio2mm5r>
Sender: atm-bounces@atmlist.net

Lee Valley did carry shellac flakes a few years ago, I am fairly certain
they still carry a few different flavours as they cater more to the
neanderthal (hand tool) rather than the Norm (power everything) crowd.

George Anderson
Clear skies and good health

Ellen Mackenzie wrote:
> 
> Thanks for the tip Woodchuck, I'll give Lee Valley a try, I thought shellac
> had gone the route of raw linseed oil and such because of its' solvent - -
> methyl hydrate - - need a court order to by it. I don't dilute the sealing
> wax, I just heat it up and let it flow on.
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] re: Working with thin mirrors
  - From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>

Prev by Author: Re: [ATM] glass blank
Next by Author: Re: [ATM] re: metal working Titanium
Prev by thread: Re: [ATM] re: Working with thin mirrors
Next by thread: [ATM] RE:EBAY HUGE LENS TELESCOPE CALCULATIONS
Index(es):
- Author
- Thread