[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: [ATM] re: Working with thin mirrors

To: "Bob May" <bobmay@nethere.com>, <atm@atmlist.net>
Subject: RE: [ATM] re: Working with thin mirrors
From: "Peter" <peter@kitgear.com>
Date: Sat, 27 Nov 2004 16:39:32 -0500
Importance: Normal
In-Reply-To: <007a01c4d442$41fac4e0$1600a8c0@amd>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

Hi,

Thanks for your feedback.

When working large thin mirrors is it best to have a full size lap and MOT
or sub diameter laps with TOT?


Peter

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- RE: [ATM] re: Working with thin mirrors
  - From: Ken Hunter <atm_ken_hunter@yahoo.com>
- RE: [ATM] re: Working with thin mirrors
  - From: mbartels@bbastrodesigns.com

References:
- Re: [ATM] re: Working with thin mirrors
  - From: "Bob May" <bobmay@nethere.com>

Prev by Author: RE: [ATM] Working with Large Thin Mirrors
Next by Author: RE: [ATM] glue
Prev by thread: Re: [ATM] re: Working with thin mirrors
Next by thread: RE: [ATM] re: Working with thin mirrors
Index(es):
- Author
- Thread