[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Re: Maksutov corrector minimum thickness

To: <atm@atmlist.net>
Subject: Re: [ATM] Re: Maksutov corrector minimum thickness
From: "Bob May" <bobmay@nethere.com>
Date: Mon, 15 Nov 2004 09:58:24 -0800
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <20041116.002722.3132.1.vladis.2@juno.com>
Sender: atm-bounces@atmlist.net

Actually Vlad, both pieces need to be about the same thickness.  The
positive element needs the thickness in the center while the negative
element (which has the same curves on it, only in the opposite direction)
needs that thickness at the edge.
Bob May
bobmay@nethere.com
http://nav.to/bobmay
http://bobmay.astronomy.net

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] Re: Maksutov corrector minimum thickness
  - From: vladimir sacek <vladis.2@juno.com>

Prev by Author: Re: [ATM] PLOP 101
Next by Author: Re: [ATM] Grinding Spindle
Prev by thread: [ATM] Re: Maksutov corrector minimum thickness
Next by thread: [ATM] Re: Maksutov corrector minimum thickness
Index(es):
- Author
- Thread