[ATM] Resource for thin Titanium strips

[artbianconi@blast.net]

Thanks Matt. This helps a great deal!

Art

> Online Metals sells Titanium sheet in 0.020" thickness which is
> just right . You get 4 custom cuts for free per purchase, which 
is
> good , since I wouldn't want to cut Titanium especially when it
> can be done free by the supplier. 20mils ( 0.5mm) is not too 
thin
> to become a dangerous blade in the dark, but thin enough to
> minimize diffraction . Several people using spiders this thin
> reported not noticing diffraction spikes at all .
> 
> best regards,
> matt tudor
> 
> -----Original Message-----
> From: Jerry B. Hillman <JBHillman@ev1.net>
> To: artbianconi@blast.net <artbianconi@blast.net>; Guy 
Brandenburg
> <gfbrandenburg@yahoo.com> Cc: Atm@atmlist.net <Atm@atmlist.net>
> Date: Sunday, November 14, 2004 8:11 PM Subject: Re: [ATM] Re: 
ATM
> Digest, Vol 11, Issue 10
> 
> 
> >Right.  .0007" ribbon, stretched tight.  Would make a good 
scapel
> >but I don't think I want it where I might brush against it in 
the
> >dark, or otherwise. Clear skies, Jerry
> >
> >_______________________________________________
> >ATM mailing list http://www.atmlist.net/
> 
> 
> 


This post and any attachments were tested before being sent and 
found to be virus free.
Our Norton-Symantic virus list is updated daily.



_______________________________________________
ATM mailing list http://www.atmlist.net/