Re: [ATM] Re: ATM Digest, Vol 11, Issue 10

["matt" <mariusrf@bellsouth.net>]

Online Metals sells Titanium sheet in 0.020" thickness which is just right .
You get 4 custom cuts for free per purchase, which is good , since I
wouldn't want to cut Titanium especially when it can be done free by the
supplier. 20mils ( 0.5mm) is not too thin to become a dangerous blade in the
dark, but thin enough to minimize diffraction . Several people using spiders
this thin reported not noticing diffraction spikes at all .

best regards,
matt tudor

-----Original Message-----
From: Jerry B. Hillman <JBHillman@ev1.net>
To: artbianconi@blast.net <artbianconi@blast.net>; Guy Brandenburg
<gfbrandenburg@yahoo.com>
Cc: Atm@atmlist.net <Atm@atmlist.net>
Date: Sunday, November 14, 2004 8:11 PM
Subject: Re: [ATM] Re: ATM Digest, Vol 11, Issue 10


>Right.  .0007" ribbon, stretched tight.  Would make a good scapel but I
>don't think I want it where I might brush against it in the dark, or
>otherwise.
>Clear skies, Jerry
>
>_______________________________________________
>ATM mailing list http://www.atmlist.net/

_______________________________________________
ATM mailing list http://www.atmlist.net/