Amateur Telescope Makers (ATM) Archive for MAY97 - by author
- No Subject
- From: Béatrice & Daniel <beatrice.gregoire@club.innet.be>
- ATM substitutes for teflon in dobsons?
- From: Jörg Rudolph <rudolphj@pprz02.hrz.Uni-Marburg.DE>
- Re: ATM Question on SONOTUBES and Dewaxing
- From: akkana@best.com (Akkana)
- Re: ATM Scope-on-Trailer
- From: akkana@best.com (Akkana)
- Re: ATM Earth and Sky Primary Mirror
- From: akkana@best.com (Akkana)
- Re: ATM Astronomy Magazine Mismanagement
- From: akelly@ghg.net (Albert F. Kelly)
- Re: ATM Mel's System
- From: akelly@ghg.net (Albert F. Kelly)
- Re: ATM A contest
- From: akelly@ghg.net (Albert F. Kelly)
- Re: ATM heating pitch
- From: Allan Hollander <adh@geog.ucsb.edu>
- ATM Invisible spider vanes....
- From: "Anderson, Jay" <andeja@mail.va.gov>
- ATM Benefits of a 2" focuser
- From: "Anderson, Jay" <andeja@mail.va.gov>
- ATM Non-reflective paints and materials
- From: "Anderson, Jay" <andeja@mail.va.gov>
- RE: Re ATM Barlow, Focal extender...
- From: "Anderson, Jay" <andeja@mail.va.gov>
- ATM Diffraction limited newt mirrors
- From: "Anderson, Jay" <andeja@mail.va.gov>
- Re: ATM Astronomy Magazine Mismanagement
- From: "Anderson, Jay" <andeja@mail.va.gov>
- RE: ATM Interchangable secondary mirrors
- From: "Anderson, Jay" <andeja@mail.va.gov>
- ATM Archives updated for April 1997
- From: "Andy Steere" <andy@www.system.missouri.edu>
- Re: ATM trial postings of atm-digest to s.a.a.
- From: "Andy Steere" <andy@www.system.missouri.edu>
- Re: ATM Friction roller drives
- From: andydtg@phoenix.net
- Re: ATM Defining Super-Planetary
- From: andydtg@phoenix.net
- Re: ATM lens for finderscope
- From: andydtg@phoenix.net
- Re: ATM Off Axis mask
- From: andydtg@phoenix.net
- Re: ATM Scum
- From: andydtg@phoenix.net
- Re: ATM Tube sag?
- From: andydtg@phoenix.net
- ATM Tube sag?
- From: andydtg@phoenix.net
- Re: ATM Mel's System
- From: andydtg@phoenix.net
- Re: ATM I HATE Dobsonians (THAT got your attention!)
- From: andydtg@phoenix.net
- ATM optical design software
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM Spherizing after rough grinding : when tp stop
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM Pitch lab, microfacetts, optic programs
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM pitch in microwave ovens
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM missing tiles
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM New Mirror
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- ATMs in the microwave
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- ATM Optical Design Software
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM New Mirror
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM Spherizing at the end of rough grinding; Carbo consumption
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- ATM plaster, glue and glass
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- ATM "The New S&T"
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re[2]: ATM "The New S&T"
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM CD Prism
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM Short Usable Eyepiece Range
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: Re[2]: ATM "The New S&T"
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM Earth and Sky Primary Mirror
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM "New" S&T
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM cutting glass
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: Resistors waste energy WAS:ATM DIY LED Flashlight Conversion
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM Making a Telrad finder
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM Telephoto lenses as a small portable telescope...
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- Re: ATM Telephoto lenses as a small portable telescope...
- From: astillma@nit.AirTouch.COM (Anthony Stillman)
- ATM Broke tool
- From: Armando Blanco Perez <ablanco@witss.gdl.iteso.mx>
- RE: ATM 80mm finder rings/tripod head
- From: Art Russell <artrussell@mindspring.com>
- ATM Re-release of TM Magazine
- From: Art Russell <artrussell@mindspring.com>
- ATM FW: Back Issues of Telescope Making Magazine
- From: Art Russell <artrussell@mindspring.com>
- RE: ATM TM Back Issues?
- From: Art Russell <artrussell@mindspring.com>
- RE: ATM atm forming in Atlanta area
- From: Art Russell <artrussell@mindspring.com>
- ATM RE: Changes to Sky & Tel
- From: Art Russell <artrussell@mindspring.com>
- RE: ATM Making sturdy binocular tripods
- From: Art Russell <artrussell@mindspring.com>
- ATM C8 Stepper Drive/ Opto Star-tracker
- From: barry.klein@deltronix.com (Barry Klein)
- ATM S&T CD's.....
- From: barry.klein@deltronix.com (Barry Klein)
- ATM photomultiplier tubes?
- From: barry.klein@deltronix.com (Barry Klein)
- ATM: LED flashlight conv.
- From: barry.klein@deltronix.com (Barry Klein)
- Re: ATM Defining Super-Planetary
- From: beck <rbeck@gate.net>
- ATM TM Mags--outdated??
- From: beck <rbeck@gate.net>
- ATM Homemade mirror
- From: "Bill Prewitt" <bprewitt@newreach.net>
- Re: ATM Looking for mirror cell ideas
- From: "Bill Prewitt" <bprewitt@newreach.net>
- ATM TM #13 look up request for mounting
- From: Billy Rudock <Billy_Rudock@notes.seagate.com>
- Re: ATM Cast iron tools
- From: Billy Rudock <Billy_Rudock@notes.seagate.com>
- Re: ATM Cast iron tools
- From: Billy Rudock <Billy_Rudock@notes.seagate.com>
- ATM JAVA Spot Diagram Applet
- From: rgb@ncube.com (Bob Bond)
- Re: ATM JAVA Spot Diagram Applet
- From: rgb@ncube.com (Bob Bond)
- ATM Diagonal Question
- From: machead@qadas.com (Bob Hazel)
- ATM pitch emergency
- From: Bob Hazel <machead@qadas.com>
- ATM Re: Pitch Emergency
- From: Bob Hazel <machead@qadas.com>
- ATM small rasied center of mirror
- From: Bob Hazel <machead@qadas.com>
- ATM Vendors of secondaries
- From: Bob Hazel <machead@qadas.com>
- ATM Scum
- From: Bob Hazel <machead@qadas.com>
- Re: ATM Scum
- From: Bob Hazel <machead@qadas.com>
- Re: ATM Scum
- From: Bob Hazel <machead@qadas.com>
- ATM Mirror/Foucault readings
- From: Bob Hazel <machead@qadas.com>
- ATM Mirror/Foucault readings
- From: Bob Hazel <machead@qadas.com>
- ATM foucault readings/mirror coatings
- From: Bob Hazel <machead@qadas.com>
- Re: ATM horror story
- From: Bob Hazel <machead@qadas.com>
- ATM figuring/fine grinding.
- From: Bob Hazel <machead@qadas.com>
- Re: ATM Lenses for finders?
- From: Bob Lombardi <blombard@iu.net>
- ATM LED Flashlights
- From: Bob Scholtz <rscholtz@hsonline.net>
- [Fwd: ATM Collimation]
- From: Bob Scholtz <rscholtz@hsonline.net>
- ATM "Birth Announcement"
- From: Brad Davy <bdavy@bigdog.fred.net>
- Re: ATM Diffraction limited newt mirrors
- From: eedbrcu@eede.ericsson.se (Bratislav Curcic)
- ATM R-vV planetary scope
- From: eedbrcu@eede.ericsson.se (Bratislav Curcic)
- Re: ATM Mercury flats
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Defining Super-Planetary
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Defining Super-Planetary
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Building a Cassegarian
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Off axis parabolas
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM HELP! exact 2" eyepiece OD?
- From: Brian Nestel <blast@aloha.net>
- Re: Fwd: ATM Fwd: Question on SONOTUBES and Dewaxing
- From: Brian Nestel <blast@aloha.net>
- ATM Libel,Slander
- From: Brian Nestel <blast@aloha.net>
- Re: ATM "Rocktite " for tile tool
- From: Brian Nestel <blast@aloha.net>
- Re: ATM:Mirror cells and aluminizing
- From: Brian Nestel <blast@aloha.net>
- Re: ATM pitch in microwave ovens
- From: Brian Nestel <blast@aloha.net>
- ATM Carriage returns.
- From: Brian Nestel <blast@aloha.net>
- ATM HST Help
- From: Brian Nestel <blast@aloha.net>
- Re: ATM PC prices continue to drop
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Astrosystems Ultra-low 1.25 to 2 inch adapter
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Additional...
- From: Brian Nestel <blast@aloha.net>
- Re: ATM what mount for fixed observatory
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Dobsonian mount
- From: "Bruce D. Sayre" <sayre@foothill.net>
- ATM Lenses for finders?
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM Lenses for finders?
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM lens for finderscope
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM Off Axis mask
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM Broke tool
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM Done polishing?
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM Forget 7in?
- From: Bruce Swayze <swayze@europa.com>
- ATM Re: Question on SONOTUBES and Dewaxing
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM Mirror questions...
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM Where do I start refiguring?
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM heating pitch
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM cold air sheaths around spiders, etc.
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM missing tiles
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM finder lens
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM Cat food can tool
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM Spherizing at the end of rough grinding; Carbo consumption
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM PC prices continue to drop
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM horror story
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM Randy Johnson, and other amateurs, and RTMC
- From: Bruce Swayze <swayze@europa.com>
- Re: ATM Pipe Fittings
- From: Bruce Swayze <swayze@europa.com>
- ATM RTV and mirror cells
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- ATM Drawing Exchange Format?
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- ATM Re: Drill Press Accessories -Reply
- From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
- ATM Richard Berry's new book!
- From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
- ATM introduction web site.
- From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
- ATM Pitch source
- From: Buck Childers <buckchil@sound.net>
- Re: ATM Lenses for finders?
- From: Buck Childers <buckchil@sound.net>
- ATM RTV and mirror cells
- From: Buck Childers <buckchil@sound.net>
- Re: ATM 13" SCT update
- From: Buck Childers <buckchil@sound.net>
- Re: ATM Off axis mask
- From: Buck Childers <buckchil@sound.net>
- Re: ATM Mirror questions...
- From: Buck Childers <buckchil@sound.net>
- Re: ATM trial postings of atm-digest to s.a.a.
- From: Buck Childers <buckchil@sound.net>
- Re: ATM pitch in microwave ovens
- From: Buck Childers <buckchil@sound.net>
- ATM When to stop polishing with pads?
- From: Buck Childers <buckchil@sound.net>
- Re: ATM Cookbook 245 Cooling
- From: Callum Potter <CallumP@selectst.com>
- ATM Collimation followup.
- From: Carl Brennan <carl@pader-online.de>
- ATM First light. X-point support ?? Why not infinite ??
- From: Carl Brennan <carl@pader-online.de>
- ATM Aluminising in Germany ?
- From: Carl Brennan <carl@pader-online.de>
- Re: ATM Collimation, the Truth?
- From: Carl Brennan <carl@pader-online.de>
- ATM foucault tester
- From: Cary Chleborad <bennu@ns.net>
- ATM finder for cheap, graphic xfer
- From: Charles Broward <afn43753@afn.org>
- Re: ATM Off axis mask
- From: Charles Hull <charlie@astro.washington.edu>
- RE: ATM:Mirror cells and aluminizing
- From: cshaw@ghg.net (Charles W. Shaw)
- ATM Mel's System
- From: cshaw@ghg.net (Charles W. Shaw)
- Re: ATM Mel's System
- From: cshaw@ghg.net (Charles W. Shaw)
- ATM "New" S&T
- From: cshaw@ghg.net (Charles W. Shaw)
- Re: ATM Mel's System
- From: cshaw@ghg.net (Charles W. Shaw)
- RE: ATM Lightweight Composite Mirrors
- From: CHEN@stars.gsfc.nasa.gov
- Re: ATM Lightweight Composite Mirrors
- From: CHEN@stars.gsfc.nasa.gov
- ATM 3 Wormgears and only 1 Worm
- From: cnebark@ix.netcom.com (Chris & Elizabeth Barker)
- ATM Re: Drill Press Accessories
- From: cnebark@ix.netcom.com (Chris & Elizabeth Barker)
- ATM Re: Drill Press Accessories - Correction
- From: cnebark@ix.netcom.com (Chris & Elizabeth Barker)
- ATM Re: Beginners resource for machining?
- From: cnebark@ix.netcom.com (Chris & Elizabeth Barker)
- Re: ATM optica bc
- From: Chris Westland +852 2358-7643 <westland@uxmail.ust.hk>
- Re: ATM Lightweight Composite Mirrors
- From: Chris Westland +852 2358-7643 <westland@uxmail.ust.hk>
- Re: ATM cleaning primary mirror
- From: Christopher Scott <CJScott@worldnet.att.net>
- Re: ATM gearing discussion cont
- From: Chuck Cross <ccross@kerner.com>
- Re: ATM friction
- From: Chuck Dethloff <telmor@teleport.com>
- ATM Floatation cell pads
- From: Chuck Dethloff <telmor@teleport.com>
- re: ATM balancing truss scopes
- From: Chuck Dethloff <telmor@teleport.com>
- ATM Re: Astronomy boycott
- From: Chuck Hull <chull@pacbell.net>
- ATM Is there a FAQ?
- From: CHUCK MORFORD <MORFORD.CHUCK@EPAMAIL.EPA.GOV>
- ATM Fwd: Question on SONOTUBES and Dewaxing
- Fwd: ATM Fwd: Question on SONOTUBES and Dewaxing
- ATM Depressed Zone
- From: Cooper <scooper@robles.callutheran.edu>
- Re: ATM pitch in microwave ovens
- From: Cooper <scooper@robles.callutheran.edu>
- Re: ATM Binoc TV Tubes
- From: Cooper <scooper@robles.callutheran.edu>
- ATM Bearing material or spider vane
- From: Damian Kessler <dkessler@crl.nmsu.edu>
- Re: Resistors waste energy WAS:ATM DIY LED Flashlight Conversion
- From: Dan Brown <brownd@holmes.uchastings.edu>
- Re: ATM Astrosystems Ultra-low 1.25 to 2 inch adapter
- From: Dan Brown <brownd@holmes.uchastings.edu>
- Re: ATM Let's Work on a Basic, Donatable Telescope
- From: Dan Brown <brownd@holmes.uchastings.edu>
- Re ATM Pipe Fittings
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: Re ATM Pipe Fittings
- From: "Dan Chaffee" <dchaffee@gvi.net>
- RE: ATM TM Mags--outdated??
- From: Dan Harriman <kc5gxl@pnx.com>
- Re: ATM Astronomy Magazine Mismanagement
- From: Dan Harriman <kc5gxl@pnx.com>
- ATM Defining Super-Planetary
- From: daniel chaffee <dchaffee@gvi.net>
- Re: ATM Defining Super-Planetary
- From: daniel chaffee <dchaffee@gvi.net>
- Re: ATM small rasied center of mirror
- From: daniel chaffee <dchaffee@gvi.net>
- Re: ATM Defining Super-Planetary
- From: daniel chaffee <dchaffee@gvi.net>
- Re: ATM tool damage
- From: daniel chaffee <dchaffee@gvi.net>
- Re: ATM Off axis mask
- From: daniel chaffee <dchaffee@gvi.net>
- Re: SV: ATM Defining Super-Planetary
- From: daniel chaffee <dchaffee@gvi.net>
- Re: ATM first mirror
- From: daniel chaffee <dchaffee@gvi.net>
- Re: ATM FW: TM mags...continued
- From: Daniel Walker <dwalker@SUL-ROSS-1.SULROSS.EDU>
- Re: ATM Aluminising in Germany ?
- From: Danny Distelmans <Danny.Distelmans@ping.be>
- ATM Re: atm-digest V1 #679
- From: darryl phillips <dphillip@falcon.dist214.k12.il.us>
- ATM Refractor focusers & Observatory Lube
- From: Darryl Stanford <dstanfor@ccsf.cc.ca.us>
- ATM pitch laps help
- From: Darwin Teague <darwin@indy.net>
- ATM heating pitch
- From: Darwin Teague <darwin@indy.net>
- ATM optica bc
- From: Darwin Teague <darwin@indy.net>
- Re: ATM Benefits of a 2" focuser
- From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
- Re: ATM Off Axis mask
- From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
- Re: ATM Scum
- From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
- ATM: Where's Steve?
- From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
- Re: ATM heating pitch
- From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
- Re: ATM missing tiles
- From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
- Re: ATM Minor Mirror Tragedy
- From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
- ATM Re: LED Control
- From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
- Re: ATM Foucault trouble
- From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
- ATM Re: Foucault test
- From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
- ATM True Stellafane Stories(long)
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM True Stellafane Story
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Scum
- From: Dave Sopchak <das@po.cwru.edu>
- ATM HELP! exact 2" eyepiece OD?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM HELP! exact 2" eyepiece OD?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Cassegrain
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM "Rocktite " for tile tool
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM one kit two scopes
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Cast iron tools
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Silver coating VS Aluminum
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM pitch in microwave ovens
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Homemade mirror
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM "The New S&T"
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM making a pitch lap
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Additional...
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Additional...
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM "The New S&T": A suggestion.
- From: Dave Wilkinson <dkw100@york.ac.uk>
- ATM New To List... Have Some Questions!!!
- Re: ATM Carriage returns.
- From: "David B. Toth" <ve3gyq@amsat.org>
- Re: ATM "Say it ain't so!"
- From: "David B. Toth" <ve3gyq@amsat.org>
- RE: ATM "Say it ain't so!"
- From: "David B. Toth" <ve3gyq@amsat.org>
- Re: Re[2]: ATM "The New S&T"
- From: "David B. Toth" <ve3gyq@amsat.org>
- Re: ATM "The New S&T": A suggestion.
- From: "David B. Toth" <ve3gyq@amsat.org>
- Re: ATM "The New S&T"
- From: "David B. Toth" <ve3gyq@amsat.org>
- ATM Collimation
- From: David Brooks <davidbr@microsoft.com>
- ATM ProtoStar Components
- From: David Brooks <davidbr@microsoft.com>
- Re: ATM New Mirror
- From: "David Lilly" <dhl@sprynet.com>
- Re: ATM Re: coatings
- From: "David Lilly" <dhl@sprynet.com>
- Re: ATM foucault readings/mirror coatings
- From: "David Lilly" <dhl@sprynet.com>
- ATM S&T New Format
- From: "David Lilly" <dhl@sprynet.com>
- ATM Introduction
- From: David Sleeter <sleete19@idt.net>
- ATM Drawing Exchange Format?
- From: David Sleeter <sleete19@idt.net>
- ATM Let's Work on a Basic, Donatable Telescope
- From: David Sleeter <sleete19@idt.net>
- ATM Drawing Xchange Format
- From: David Sleeter <sleete19@idt.net>
- ATM Re: Basic Donatable Telescope
- From: David Sleeter <sleete19@idt.net>
- ATM How to Clean Mirrors
- From: David Sleeter <sleete19@idt.net>
- ATM EXCELLENT GREASE
- From: David Sleeter <sleete19@idt.net>
- ATM I HATE Dobsonians (THAT got your attention!)
- From: David Sleeter <sleete19@idt.net>
- RE: ATM microwaves/TV/telescopes
- From: "David V. Fansler" <dfansler@rias.COM>
- ATM newbie:light pollution
- From: DDouglas@bangate.compaq.com
- ATM Mirror Questions now Mirror Thermal Effects
- From: ketelsen@as.arizona.edu (Dean Ketelsen)
- ATM Re: Refractor focusers & Observatory Lube
- From: "Dean W. Armstrong" <d-armstrong@uchicago.edu>
- ATM Battery box connectors
- From: Dennis Hoofnagle <dhoof@az.com>
- Re: ATM DIY LED Flashlight Conversion
- From: Dennis Hoofnagle <dhoof@az.com>
- Re: ATM "The New S&T"
- From: Dennis Hoofnagle <dhoof@az.com>
- ATM make my first telescope
- From: Dennis Kung <dkg@idirect.com>
- ATM coatings
- From: Dennis Kung <dkg@idirect.com>
- ATM one kit two scopes
- From: Dennis Kung <dkg@idirect.com>
- ATM focal length
- From: Dennis Kung <dkg@idirect.com>
- Re[4]: ATM Battery Considerations
- Re: ATM Let's Work on a Basic, Donatable Telescope
- From: dheeraj devgun <devgun@linkindia.com>
- ATM Schupmann and laser interferometer
- From: Dick Tremaine <dick@tremaine.com>
- Re: ATM focal length
- From: Dick Tremaine <dick@tremaine.com>
- ATM Question about mirrors
- From: "Diego Alejandro Protas" <shadowcaster@abaconet.com.ar>
- ATM DIY LED Flashlight Conversion
- From: Don_Dohanik@firstavenue.com (Don Dohanik)
- RE: ATM TM Mags--outdated??
- From: Don Loftus <dloftus@edu15.coe.ufl.edu>
- ATM, mirror grinding talk
- From: Don Loftus <dloftus@edu15.coe.ufl.edu>
- Re: Resistors waste energy WAS:ATM DIY LED Flashlight Conversion
- From: don.h.young@lmco.com
- RE: ATM Resistors
- From: don.h.young@lmco.com
- Re: ATM Cookbook 245 Cooling
- From: Donald Clement <clement@cqt.com>
- Re: ATM baffled
- From: Donald Clement <clement@cqt.com>
- ATM Nextel Velvet Coating
- From: Donald Clement <clement@INETWORLD.NET>
- ATM Sandpaper baffles
- From: Donald Clement <clement@cqt.com>
- ATM Re: sandpaper
- From: Donald Clement <clement@cqt.com>
- ATM Nextel not
- From: Donald Clement <clement@cqt.com>
- Re: What size Drill Press for ATM?
- From: Donald Clement <clement@INETWORLD.NET>
- Re: ATM TM Mags--outdated??
- From: Donald Clement <clement@INETWORLD.NET>
- ATM TM reprints
- From: Donald Clement <clement@INETWORLD.NET>
- Re: ATM Cast iron tools
- From: Donald Clement <clement@INETWORLD.NET>
- Re: ATM pitch in microwave ovens
- From: Donald Clement <clement@cqt.com>
- ATM "The New S&T"
- From: Donald Clement <clement@INETWORLD.NET>
- Re: ATM The New S&T
- From: Donald Clement <clement@cqt.com>
- Re: ATM Making sturdy binocular tripods
- From: Donald Clement <clement@INETWORLD.NET>
- Re: Resistors waste energy WAS:ATM DIY LED Flashlight Conversion
- From: Donald Clement <clement@cqt.com>
- Re: ATM Making a Telrad finder
- From: Donald Clement <clement@cqt.com>
- ATM A Tube Full of Worms!!!
- From: Donn Starkey <dstarkey@solaris1.mysolution.com>
- ATM Repub of TM Mag
- From: Donn Starkey <dstarkey@solaris1.mysolution.com>
- Re: ATM Re: coatings
- From: "Douglas H. Bock" <dougbock@kode.net>
- ATM Response To P.A. Clausing and the group about mirror coating.
- From: "Douglas H. Bock" <dougbock@kode.net>
- Re: ATM Re: coatings & such + question ( long )
- From: "Douglas H. Bock" <dougbock@kode.net>
- Re: ATM Additional...
- From: "Douglas H. Bock" <dougbock@kode.net>
- Re: ATM Scope-on-Trailer
- From: "Dr. James E. Gort" <gort@sonetis.com>
- ATM TV screen glass for mirrors
- From: hennecke@dbag.ulm.DaimlerBenz.COM (Dr. Marcus Hennecke)
- Re: ATM Lenses for finders?
- From: Ed Cook <edrico@ncn.net>
- ATM Focuser
- From: Ed Cook <edrico@ncn.net>
- Re: ATM greetings and questions
- From: Ed Cook <edrico@ncn.net>
- ATM Cass Secondary
- From: Ed Cook <edrico@ncn.net>
- Re: ATM The New S&T
- From: Ed Cook <edrico@ncn.net>
- Re: ATM RE: atm pipe fittings
- From: Ed Cook <edrico@ncn.net>
- An ATM D-K
- From: Ed Cook <edrico@ncn.net>
- Re: ATM RE: atm pipe fittings
- From: Ed Cook <edrico@ncn.net>
- Re: ATM RTV and mirror cells
- Re: ATM plate glass
- Re: FW: ATM TV screen glass for mirrors
- RE: ATM RTMC
- ATM Cut round glass-discs/square mirrors
- From: "Emil Johnsen" <emiljo@online.no>
- Re: ATM Lightweight Composite Mirrors
- From: "Emil Johnsen" <emiljo@online.no>
- ATM Computer video for CCD
- From: "Esparza, Luis" <LEsparza@harman.com>
- Re: ATM Computer video for CCD
- From: "Esparza, Luis" <LEsparza@harman.com>
- Re: ATM Mirror questions...
- From: "Esparza, Luis" <LEsparza@harman.com>
- ATM 18 point Mirror mount
- From: "Esparza, Luis" <LEsparza@harman.com>
- Re: ATM TM Reprints
- From: "Esparza, Luis" <LEsparza@harman.com>
- ATM Stuck Tool : (
- From: "Esparza, Luis" <LEsparza@harman.com>
- Re: ATM Off axis mask
- From: espector@mlswc.uk.lucent.com
- ATM Aligning Secondary stalk
- From: espector@mlswc.uk.lucent.com
- ATM DIY LED Flashlight Conversion
- From: espector@mlswc.uk.lucent.com
- ATM Homemade refractor
- From: FRANK J ANGELINI <angelfj@erols.com>
- Re:ATM sonotube hunt
- From: Frank Shaffer <frank@iolanthe.gsfc.nasa.gov>
- ATM Re: The "New" Sky and Telescope
- From: Frank Shaffer <frank@iolanthe.gsfc.nasa.gov>
- ATM MicroGuider parts
- From: Frank Shaffer <frank@iolanthe.gsfc.nasa.gov>
- Re: ATM cutting glass
- From: Frank Shaffer <frank@iolanthe.gsfc.nasa.gov>
- ATM Glare stop sizing in refractor
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- Re: ATM Glare stop sizing in refractor
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- Re: ATM Glare stop sizing in refractor
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- Re: ATM tiny multi-position switches
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- ATM "Say it ain't so!"
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- Re: ATM "The New S&T"
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- Re: ATM Re: coatings
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- Re: ATM The New S&T
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- Re: ATM The New S&T
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- ATM Vibration damping
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- Re: ATM Telephoto lenses as a small portable telescope...
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- Re: ATM Dob Driver
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- Re: ATM Pipe Fittings
- From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
- Re: ATM Re: coatings (was Dielectric Coatings)
- From: Gary Myers <gmyers@CetLink.Net>
- Re: ATM Re: Coatings - broken mirrors
- From: Gary Myers <gmyers@CetLink.Net>
- Re: ATM Re: coatings (was Dielectric Coatings)
- From: Gary Myers <gmyers@CetLink.Net>
- Re: ATM Re: coatings (was Dielectric Coatings)
- From: Gary Myers <gmyers@CetLink.Net>
- ATM Coatings : closure
- From: Gary Myers <gmyers@CetLink.Net>
- Re: ATM Collimation
- From: Gary Myers <gmyers@CetLink.Net>
- Re: ATM Collimation
- From: Gary Myers <gmyers@CetLink.Net>
- Re: ATM Defining Super-Planetary
- From: Gary Seronik <gseronik@direct.ca>
- Re: ATM sonotube hunt
- From: Gary Seronik <gseronik@direct.ca>
- ATM Coatings
- From: Gary Seronik <gseronik@direct.ca>
- ATM Re: Salt Spray & Coatings
- From: Gary Seronik <gseronik@direct.ca>
- ATM The New S&T
- From: Gary Seronik <gseronik@direct.ca>
- Re: Resistors waste energy WAS:ATM DIY LED Flashlight Conversion
- From: Gary Seronik <gseronik@direct.ca>
- Re: ATM "The New S&T"
- From: Gary Seronik <gseronik@direct.ca>
- Re: ATM DIY LED Flashlight Conversion
- From: gwoods@albany.net (Gary Woods)
- Re: ATM Drawing Exchange Format?
- From: gwoods@albany.net (Gary Woods)
- Re: ATM C8 Stepper Drive/ Opto Star-tracker
- From: "Gene A. Lucas" <geneluca@ix.netcom.com>
- Re: ATM Lenses for finders?
- From: "Gene A. Lucas" <geneluca@ix.netcom.com>
- Re: ATM RTV and mirror cells
- From: "Gene A. Lucas" <geneluca@ix.netcom.com>
- Re: ATM True Stellafane Stories(long)
- From: "Gene A. Lucas" <geneluca@ix.netcom.com>
- Re: ATM Nextel not
- From: "Gene A. Lucas" <geneluca@ix.netcom.com>
- Re: ATM Tube sag?
- From: "Gene A. Lucas" <geneluca@ix.netcom.com>
- Re: ATM cold air sheaths around spiders, etc.
- From: "Gene A. Lucas" <geneluca@ix.netcom.com>
- Re: ATM "The New S&T"
- From: "Gene A. Lucas" <geneluca@ix.netcom.com>
- Re: ATM Telrad Flashing Circuit
- From: George Korody <GKorody@prodigy.net>
- Re: ATM substitutes for teflon in dobsons?
- From: George Korody <GKorody@prodigy.net>
- Re: ATM Scope-on-Trailer
- From: George Korody <GKorody@prodigy.net>
- Re: ATM Re: coatings & such + question ( long )
- From: George Korody <GKorody@prodigy.net>
- Re: ATM cleaning primary mirror
- From: George Pentsas <gp@csd.abdn.ac.uk>
- Re: ATM Lenses for finders?
- From: Gil Stacy <gstacy@premierweb.net>
- Re: ATM TM Mags--outdated??
- From: Gil Stacy <gstacy@premierweb.net>
- Re: ATM Spherizing at the end of rough grinding; Carbo consumption
- From: Gil Stacy <gstacy@premierweb.net>
- Re: ATM The New S&T
- From: Gil Stacy <gstacy@premierweb.net>
- Re: ATM making a pitch lap
- From: Gil Stacy <gstacy@premierweb.net>
- Re: ATM Additional...
- From: Gil Stacy <gstacy@premierweb.net>
- Re: ATM Mirrors & Draino
- From: Gil Stacy <gstacy@premierweb.net>
- ATM club
- From: "Glen Bankston" <microsys@alltel.net>
- ATM sandpaper
- From: "Glen Bankston" <microsys@alltel.net>
- ATM first lap
- From: "Glen Bankston" <microsys@alltel.net>
- ATM lap better
- From: "Glen Bankston" <microsys@alltel.net>
- ATM first mirror
- From: "Glen Bankston" <microsys@alltel.net>
- ATM story
- From: "Glen Bankston" <microsys@alltel.net>
- ATM fiberglass tube
- From: "Glen Bankston" <microsys@alltel.net>
- ATM carbo
- From: "Glen Bankston" <microsys@alltel.net>
- ATM fiberglass
- From: "Glen Bankston" <microsys@alltel.net>
- ATM grit
- From: "Glen Bankston" <microsys@alltel.net>
- ATM Color CCD and focuser
- From: "Glen Bankston" <microsys@alltel.net>
- ATM foucault test
- From: "Glen Bankston" <microsys@alltel.net>
- ATM horror story
- From: "Glen Bankston" <microsys@alltel.net>
- ATM Foucault test ignorance
- From: "Glen Bankston" <microsys@alltel.net>
- ATM LED's
- From: "Glen Bankston" <microsys@alltel.net>
- ATM Foucault trouble
- From: "Glen Bankston" <microsys@alltel.net>
- ATM computerized dob
- From: "Glen Bankston" <microsys@alltel.net>
- ATM Foucault
- From: "Glen Bankston" <microsys@alltel.net>
- ATM The Telescope Making series
- From: Gord Seifert <gseifert@uniserve.com>
- Re: ATM The Telescope Making series
- From: Gord Seifert <gseifert@uniserve.com>
- ATM The Telescope Making series
- From: Gord Seifert <gseifert@uniserve.com>
- ATM Where do I start refiguring?
- From: Gord Seifert <gseifert@uniserve.com>
- ATM Just got my kit.
- From: Gordon Baldwin <gbaldw@usin.com>
- ATM Flat tool on Curved blank?
- From: Gordon Baldwin <gbaldw@usin.com>
- ATM Telescopics 10" F 5
- From: Greg Furtman <gfurtman@Spacestar.Net>
- ATM Cutting Tube in Two
- From: Greg Furtman <gfurtman@Spacestar.Net>
- Re: ATM Re: hot plants
- From: Greg Furtman <gfurtman@Spacestar.Net>
- Re: ATM newbie:light pollution
- From: Greg Furtman <gfurtman@Spacestar.Net>
- ATM Astronomy Magazine & Telescope Making
- From: Greg Furtman <gfurtman@Spacestar.Net>
- Re: ATM PC prices continue to drop
- From: Greg Furtman <gfurtman@Spacestar.Net>
- Re: ATM Rain-X
- From: Greg Furtman <gfurtman@Spacestar.Net>
- Re: ATM Re: Refractor focusers & Observatory Lube
- From: Greg Furtman <gfurtman@Spacestar.Net>
- Re: ATM Some polishing questions
- From: Greg Furtman <gfurtman@Spacestar.Net>
- Re: ATM Staining of glass?
- From: Greg Furtman <gfurtman@Spacestar.Net>
- ATM gear reducers
- From: Greg Granville <greg@laser.arl.psu.edu>
- ATM re: gear reducers
- From: Greg Granville <greg@laser.arl.psu.edu>
- Re: ATM heating pitch
- From: Greg Granville <greg@laser.arl.psu.edu>
- ATM ProtoStar spider/diagonal ?
- From: Greg Granville <greg@laser.arl.psu.edu>
- Re: ATM !Dumb questions
- re: ATM Building a Cassegarian
- ATM Planetary Cassegrain-- f 30, (long)
- Re: ATM Planetary Cassegrain
- Re: ATM Planetary Cassegrain
- ATM microwaves/TV/telescopes
- ATM DIY LED Flashlight Conversion
- ATM Resistor "problem"
- RE: ATM TM reprints, updates?
- From: "Grooms, Billie L" <Bill.Grooms@pss.boeing.com>
- ATM Inscription on willman bell blanks
- From: gperry@gaia.arc.nasa.gov (Guillaume Perry)
- ATM Spherizing after rough grinding : when tp stop
- From: gperry@gaia.arc.nasa.gov (Guillaume Perry)
- ATM Re:thanks for your answer on spherizing
- From: gperry@gaia.arc.nasa.gov (Guillaume Perry)
- Re[4]: ATM Battery Considerations
- From: "Hansen, Scott A" <Scott.A.Hansen@jci.com>
- ATM Spherizing after rough grinding : when tp stop
- From: "Hansen, Scott A" <Scott.A.Hansen@jci.com>
- Re: ATM Interchangable secondary mirrors
- From: "Hansen, Scott A" <Scott.A.Hansen@jci.com>
- Re: ATM making a pitch lap
- From: "Hansen, Scott A" <Scott.A.Hansen@jci.com>
- Re[2]: ATM making a pitch lap
- From: "Hansen, Scott A" <Scott.A.Hansen@jci.com>
- Re: ATM Re: coatings
- From: hclaus@clausing.com
- ATM Re: coatings & such + question ( long )
- From: hclaus@clausing.com
- ATM Additional...
- From: hclaus@clausing.com
- Re: ATM Coating Stains
- From: hclaus@clausing.com
- Re: ATM Mirrors & Draino
- From: hclaus@clausing.com
- ATM Outcome
- From: hclaus@clausing.com
- Re: ATM AutoTrack 2200
- From: hermperez@worldnet.att.net (Herm Perez)
- ATM How to built your own Dobsonian
- From: "J.M. van 't Kruis" <kruis@worldonline.nl>
- ATM Your the best!!!
- From: "J.M. van 't Kruis" <kruis@worldonline.nl>
- ATM Mirror defects
- From: rgjfh@micro.lucent.com (J_F_HETMANSKI)
- ATM Third Light.... Thanks Howard...
- From: Jack Schmidling <arf@mc.net>
- ATM Big Finder Lenses
- From: Jack Schmidling <arf@mc.net>
- ATM Barlow, Focal extender...
- From: Jack Schmidling <arf@mc.net>
- ATM Offset Mask and humble pie
- From: Jack Schmidling <arf@mc.net>
- ATM Diffraction Limited 16"
- From: Jack Schmidling <arf@mc.net>
- ATM Cassegrain
- From: Jack Schmidling <arf@mc.net>
- ATM Astronomy and TM
- From: Jack Schmidling <arf@mc.net>
- ATM Astro Mag and Tact
- From: Jack Schmidling <arf@mc.net>
- ATM on saa
- From: Jack Schmidling <arf@mc.net>
- ATM Metal Tools
- From: Jack Schmidling <arf@mc.net>
- ATM Sling Support
- From: Jack Schmidling <arf@mc.net>
- ATM Chat stuff
- From: Jack Schmidling <arf@mc.net>
- ATM Refractor Fever, a Cure
- From: Jack Schmidling <arf@mc.net>
- ATM ref
- From: Jack Schmidling <arf@mc.net>
- ATM Refractor Fever, a Cure
- From: Jack Schmidling <arf@mc.net>
- ATM Good Grief
- From: Jack Schmidling <arf@mc.net>
- ATM Refractor Fever
- From: Jack Schmidling <arf@mc.net>
- ATM Mirror Cell, Floatation
- From: Jack Schmidling <arf@mc.net>
- ATM Yerkes Trip Report
- From: Jack Schmidling <arf@mc.net>
- ATM Ohm's Law
- From: Jack Schmidling <arf@mc.net>
- ATM Pipe Fittings
- From: Jack Schmidling <arf@mc.net>
- ATM Dob Driver
- From: Jack Schmidling <arf@mc.net>
- ATM Re: atm pipe fittings
- From: Jack Schmidling <arf@mc.net>
- ATM Barlows?
- From: jklutts@up.net (James A. Klutts)
- ATM Telrads
- From: jklutts@up.net (James A. Klutts)
- Re: ATM Mirror questions...
- From: "James E. Gort" <gort@sonetis.com>
- Re: ATM Mirror questions...
- From: "James E. Gort" <gort@sonetis.com>
- Re: ATM the ongoing resistor saga
- From: "James E. Gort" <gort@sonetis.com>
- ATM JMI Mototrak V Problems
- From: "James F. Heilman" <heilman@netside.com>
- Re: ATM PC prices continue to drop
- From: "James F. Heilman" <heilman@netside.com>
- Re: ATM "Rocktite " for tile tool
- From: "James F. Heilman" <heilman@netside.com>
- Re: ATM RE: atm pipe fittings
- From: "James F. Heilman" <heilman@netside.com>
- Re: ATM RE: atm pipe fittings
- From: "James F. Heilman" <heilman@netside.com>
- ATM Sanding fiberglass tube
- From: James Krushlucki <jkrushl@unibase.Unibase.COM>
- ATM grinding Machines
- From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
- ATM Scope Trailer
- From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
- Re: ATM Mercury flats
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Foucault Accuracy
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM small rasied center of mirror
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Building a Cassegrain
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Mirror questions...
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM Sun's altaz.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM first mirror
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Where do I start refiguring?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Hyperbolizing
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM heating pitch
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Spherizing at the end of rough grinding; Carboconsumption
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Mirror/Foucault readings
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM RC cass design.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM foucault readings/mirror coatings
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM How to test
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM RC cass reference & testing.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM RMS Conversion ( crude)
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Homemade refractor
- From: "Jan R. Sugalski" <afn19866@afn.org>
- Re: ATM Grinding Refractor Objectives
- From: "Jan R. Sugalski" <afn19866@afn.org>
- ATM Various questions about mirror making
- From: Zikovsky@Technologist.Com (Janik Zikovsky)
- ATM Silver coating VS Aluminum
- From: Zikovsky@Technologist.Com (Janik Zikovsky)
- ATM Inexpensive eyepieces
- From: Zikovsky@Technologist.Com (Janik Zikovsky)
- ATM Interchangable secondary mirrors
- From: Zikovsky@Technologist.Com (Janik Zikovsky)
- ATM Darksky association
- From: zikovsky@geocities.com (Janik Zikovsky)
- ATM Making a Telrad finder
- From: zikovsky@geocities.com (Janik Zikovsky)
- ATM Re: atm-digest V1 #701
- From: Jason Santos <jsantos@primenet.com>
- ATM Updated TM?
- From: jaleblan@primenet.com (Jay LeBlanc)
- ATM DYI LED light
- From: jaleblan@primenet.com (Jay LeBlanc)
- RE: ATM Making sturdy binocular tripods
- From: jaleblan@primenet.com (Jay LeBlanc)
- Re: ATM Off Axis mask
- From: Jean Marc Becker <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM Mirror questions...
- From: Jean Marc Becker <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM pitch laps help
- From: Jean Marc Becker <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM Determining good tool/mirror contact.
- From: Jean Marc Becker <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM Hyperbolizing
- From: Jean Marc Becker <Jean-Marc.Becker@wanadoo.fr>
- Re: FW: ATM TV screen glass for mirrors
- From: Jean Marc Becker <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM Off axis mask
- From: Jeff <jeffr@phonetech.com>
- What size Drill Press for ATM?
- From: Jeff Crilly <jeff@communities.com>
- ATM stepper motors from floppy drives...
- From: Jeff Crilly <jeff@communities.com>
- ATM 80/20
- From: Jeff Crilly <jeff@communities.com>
- Re: ATM TV screen glass for mirrors
- From: Jeff Crilly <jeff@communities.com>
- Re: ATM Refractor Fever, a Cure
- From: Jeff Crilly <jeff@communities.com>
- ATM Telephoto lenses as a small portable telescope...
- From: Jeff Crilly <jeff@communities.com>
- ATM Cooling fans?...
- From: Jeff Crilly <jeff@communities.com>
- Re: ATM Telephoto lenses as a small portable telescope...
- From: Jeff Crilly <jeff@communities.com>
- Re: ATM Making a Telrad finder
- From: Jeff Crilly <jeff@communities.com>
- RE: ATM STOP IT!!
- From: jeff.powers@jadebbs.com
- ATM Re: Steady Cam
- From: Jerry <jerryu@sprintmail.com>
- ATM re: Video Camera
- From: Jerry <jerryu@sprintmail.com>
- ATM CD Prism
- From: Jerry <jerryu@sprintmail.com>
- ATM Cat food can tool
- From: Jerry <jerryu@sprintmail.com>
- ATM Telescope Making Series
- From: Jerry Upchurch <jerryu@sprintmail.com>
- ATM Epson printer
- From: Jerry Upchurch <jerryu@sprintmail.com>
- ATM cutting glass
- From: Jerry Upchurch <jerryu@sprintmail.com>
- ATM Schmidt Camera from SCT parts?
- From: Jim Bandy <jbandy@airmail.net>
- Re: ATM Collimation
- From: "Jim Fly" <jfly@hiwaay.net>
- Re: ATM autocollimator
- From: "Jim Fly" <jfly@hiwaay.net>
- Re: ATM Dob Driver
- From: "Jim Fly" <jfly@hiwaay.net>
- Re: ATM Dob Driver
- From: "Jim Fly" <jfly@hiwaay.net>
- ATM gearing discussion cont
- From: Jim McKay <james.mckay@yale.edu>
- ATM Split ring mount
- From: Jim McKay <james.mckay@yale.edu>
- ATM publications
- From: Jim McKay <james.mckay@yale.edu>
- Re: ATM Color CCD
- From: "John A. Maxwell" <jmax@toad.net>
- ATM Autocollimators
- From: John Akers <jakers@cyllene.uwa.edu.au>
- Re: ATM Re: TM Magazine
- From: "John D. Gwinner" <gwinner@northnet.org>
- Re: ATM trial postings of atm-digest to s.a.a.
- From: "John D. Gwinner" <gwinner@northnet.org>
- Re: FW: ATM TV screen glass for mirrors
- From: "John D. Gwinner" <gwinner@northnet.org>
- Re: ATM CD Prism
- From: "John D. Gwinner" <gwinner@northnet.org>
- Re: ATM Spherizing at the end of rough grinding; Carboconsumption
- From: "John D. Gwinner" <gwinner@northnet.org>
- Re: ATM DIY LED Flashlight Conversion
- From: "John D. Gwinner" <gwinner@northnet.org>
- Re: Resistors waste energy WAS:ATM DIY LED Flashlight Conversion
- From: "John D. Gwinner" <gwinner@northnet.org>
- Re: Resistors waste energy WAS:ATM DIY LED FlashlightConversion
- From: "John D. Gwinner" <gwinner@northnet.org>
- Re: Resistors waste energy WAS:ATM DIY LED Flashlight Conversion
- From: "John D. Gwinner" <gwinner@northnet.org>
- ATM Re: Resistors, Energy, and flashlights
- From: "John D. Gwinner" <gwinner@northnet.org>
- ATM: SI Units
- From: "John D. Gwinner" <gwinner@northnet.org>
- Re: ATM Fast Figuring
- From: John Garland <jgarland@morgan.ucs.mun.ca>
- Re: ATM Mirror/Foucault readings
- From: John Garland <jgarland@morgan.ucs.mun.ca>
- Re: ATM Drawing Exchange Format?
- From: John Garland <jgarland@morgan.ucs.mun.ca>
- Re: ATM Telephoto lenses as a small portable telescope...
- From: John Garland <jgarland@morgan.ucs.mun.ca>
- Birth of the ATM e-Journal
- From: "John Graves" <john.graves@nashville.com>
- Re: ATM Cass Secondary
- From: "John Graves" <john.graves@nashville.com>
- ATM greetings and questions
- From: ic089@cleveland.Freenet.Edu (John H. Svensson)
- ATM sonotube hunt
- From: ic089@cleveland.Freenet.Edu (John H. Svensson)
- ATM Sonotubes again
- From: ic089@cleveland.Freenet.Edu (John H. Svensson)
- Re: ATM Computer video for CCD
- From: John Maxwell <jmax@toad.net>
- Re: ATM Off axis mask
- From: John Maxwell <jmax@toad.net>
- Re: ATM Offset Mask and humble pie
- From: John Maxwell <jmax@toad.net>
- ATM Determining good tool/mirror contact.
- From: John Maxwell <jmax@toad.net>
- Re: ATM pitch in microwave ovens
- From: John Maxwell <jmax@toad.net>
- ATM Spherizing at the end of rough grinding; Carbo consumption
- From: John Maxwell <jmax@toad.net>
- Re: ATM "Rocktite " for tile tool
- From: John Veazey <veazey@ridgecrest.ca.us>
- ATM Fast Figuring
- From: John Veazey <veazey@ridgecrest.ca.us>
- Re: ATM Telescope mounts
- From: "Jon H. Peterson" <jon@osisoft.com>
- ATM plate glass
- From: Jonathan Lavoie <jlavoie@infoteck.qc.ca>
- Re: ATM Carriage returns.
- From: Jonathan Lavoie <jlavoie@infoteck.qc.ca>
- ATM Alignment with polar alignment scope on mount
- From: jmch@cosmos.tid.es (Jose Maria Chercoles Sanchez)
- Re: ATM project idea
- From: jmch@cosmos.tid.es (Jose Maria Chercoles Sanchez)
- Re: ATM LED Flashlight
- ATM Done polishing?
- From: Ken and Teresa Lilja <klilja@enteract.com>
- RE: ATM Gear Reducers
- From: Ken Carter <kencar@worldnet.att.net>
- RE: ATM Re: TM Magazine
- From: Ken Carter <kencar@worldnet.att.net>
- RE: ATM on saa
- From: Ken Carter <kencar@worldnet.att.net>
- RE: ATM "Say it ain't so!"
- From: Ken Carter <kencar@worldnet.att.net>
- RE: ATM mercury flats
- From: Ken Launie <launiek@cliffy.polaroid.com>
- ATM Off axis parabolas
- From: Ken Launie <launiek@cliffy.polaroid.com>
- Re: ATM pitch emergency
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Benefits of a 2" focuser
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Collimation JSO Schmitt Camera
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Scum
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Scum
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Fwd: Question on SONOTUBES and Dewaxing
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Poncet Platform * ANNOUNCEMENT *
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM one kit two scopes
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Cast iron tools
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Determining good tool/mirror contact.
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM pitch in microwave ovens
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM pitch in microwave ovens
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM pitch in microwave ovens
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM heating pitch
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Just got my kit.
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Some polishing questions
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Spherizing at the end of rough grinding; Carbo consumption
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Spherizing at the end of rough grinding; Carboconsumption
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Mirror making video.
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM "The New S&T": A suggestion.
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Re: coatings & such + question ( long )
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Darksky association
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM "The New S&T"
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM undercorrection
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Making a Telrad finder
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Telephoto lenses as a small portable telescope...
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Dob Driver
- From: Ken Lowther <s0109366@cc.ysu.edu>
- ATM Re: Coatings - broken mirrors
- From: Kevin Alexander <kevalex@concentric.net>
- ATM Earth and Sky Primary Mirror
- From: Kevin Bong <kbong@carroll1.cc.edu>
- ATM RE: atm pipe fittings
- From: Kevin Bong <kbong@carroll1.cc.edu>
- Re: ATM baffled
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM Re: atm-digest V1 #613
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM Invisible spider vanes....
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM Mercury flats
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM Computer video for CCD
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: What size Drill Press for ATM?
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM Barlow, Focal extender...
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM Mirror questions...
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM pitch laps help
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM Cast iron tools
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM heating pitch
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM [Fwd: Re: Equatorial mount musings]
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM ref
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM Re:Mirror cells and aluminizing
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM finder lens
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM Sanding fiberglass tube
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM DIY LED Flashlight Conversion
- From: kevin@aquilagroup.com (Kevin Ferguson)
- ATM How to Fix a Droopy Dob.
- From: kevin@aquilagroup.com (Kevin Ferguson)
- Re: ATM Foucault trouble
- From: kevin@aquilagroup.com (Kevin Ferguson)
- ATM Telescope mounts
- From: Kip Larsen <kip@crl.com>
- RE: ATM:Mirror cells and aluminizing
- From: Klaus-Peter Schroeder <schroder@weizen.physik.TU-Berlin.DE>
- RE: ATM Refractor Fever, a Cure
- From: Klaus-Peter Schroeder <schroder@weizen.physik.TU-Berlin.DE>
- ATM past and future publications
- From: Kreig McBride <kmcbride@memes.com>
- Re: ATM Source for 1/4" Low Profile Focusers?
- From: Kreig McBride <kmcbride@memes.com>
- ATM sucking floss
- From: Kreig McBride <kmcbride@memes.com>
- ATM microwaves/TV/telescopes
- From: Kreig McBride <kmcbride@memes.com>
- Re: ATM Scope-on-Trailer
- From: Kreig McBride <kmcbride@memes.com>
- ATM *RTMC Report*
- From: Kreig McBride <kmcbride@memes.com>
- Re: ATM Mercury flats
- From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
- Re: ATM Cutting Tube in Two
- From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
- Re: ATM RTV and mirror cells
- From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
- Re: ATM Off axis parabolas
- From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
- Re: ATM Planetary Cassegrain-- f 30
- From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
- Re: ATM heating pitch
- From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
- Re: ATM pitch in microwave ovens
- From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
- Re: ATM pitch in microwave ovens
- From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
- Re: ATM Some polishing questions
- From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
- Re: ATM Glare stop sizing in refractor
- From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
- Re: ATM Staining of glass?
- From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
- ATM Some polishing questions
- From: Kyle Barger <kbarger@haverford.edu>
- Re: ATM Mercury flats
- From: "Lawrence D. Lopez" <lopez@mv.mv.com>
- Re: ATM Mercury flats
- From: "Lawrence D. Lopez" <lopez@mv.mv.com>
- Re: ATM Mercury flats
- From: "Lawrence D. Lopez" <lopez@mv.mv.com>
- Re: ATM HELP! exact 2" eyepiece OD?
- From: "Lawrence D. Lopez" <lopez@mv.mv.com>
- ATM coatings
- Re: ATM Re: coatings
- ATM Coating Stains
- Re: ATM plate glass
- Re: ATM Annealing
- Re: ATM Rotating Tube Ideas
- From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
- ATM Defining Super-Planetary; masks, etc.
- From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
- ATM TM Mags--outdated??
- From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
- ATM cast iron c/weight substitute for Astro Physics
- From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
- ATM cold air sheaths around spiders, etc.
- From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
- ATM enhanced coating worksheet....
- From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
- ATM Jeff Schroeder's 11 inch refractor
- From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
- Re: ATM Glare stop sizing in refractor
- From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
- Re: ATM portable dob
- From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
- Re: ATM Sanding fiberglass tube
- From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
- Re: ATM Astrosystems Ultra-low 1.25 to 2 inch adapter
- From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
- ATM aluminising in germany
- From: "Mag. Wolfgang Birkfellner" <wbirk@mamba.bmtp.akh-wien.ac.at>
- ATM Qs about Aluminum Tools for first mirror!
- From: Malte John <malte@poweronline.net>
- Re: ATM DIY LED Flashlight Conversion
- From: Malte John <malte@poweronline.net>
- Re: Resistors waste energy WAS:ATM DIY LED Flashlight Conversion
- From: Malte John <malte@poweronline.net>
- ATM glass tool versus tile tool
- From: Rien.Lugt@space-elec.dofn.de (Marinus van der Lugt RST16)
- Re: ATM glass tool versus tile tool
- From: Rien.Lugt@space-elec.dofn.de (Marinus van der Lugt RST16)
- Re: ATM How to test
- From: Rien.Lugt@space-elec.dofn.de (Marinus van der Lugt RST16)
- Re: ATM the ongoing resistor saga
- From: "Mark A. Wicks" <mwicks@odo.gmi.edu>
- ATM Looking for mirror cell ideas
- From: mcola@netexp.net (Mark Colasante)
- Re: ATM Dielectric Coatings
- From: Mark Cowan <cowanm@open.org>
- ATM Re: coatings (was Dielectric Coatings)
- From: Mark Cowan <cowanm@open.org>
- Re: ATM "The New S&T": A suggestion.
- From: Mark Cowan <cowanm@open.org>
- Re: ATM making a pitch lap
- From: Mark Cowan <cowanm@open.org>
- Re: ATM Epoxy for plaster tools
- From: Mark Cowan <cowanm@open.org>
- Re: ATM, mirror grinding talk
- From: Mark Cowan <cowanm@open.org>
- ATM Newbie Questions
- From: Mark Daugherty <mdd@iquest.net>
- ATM Short Usable Eyepiece Range
- From: Mark Daugherty <mdd@iquest.net>
- Re: ATM New To List... Have Some Questions!!!
- From: "Mark Salter" <salter7@pe.net>
- ATM Off axis mask
- From: Mark Squicquero <canf_ms@access.ohio.gov>
- ATM Newt program
- From: Mark Squicquero <canf_ms@access.ohio.gov>
- No Subject
- From: mark.kaye@sympatico.ca
- Re: ATM Astronomy Magazine Mismanagement
- From: "Marty Morris" <mmorris@hns.com>
- RE: What size Drill Press for ATM?
- From: "Mathew A. Marulla" <atm@tiac.net>
- RE: ATM HELP! exact 2" eyepiece OD?
- From: "Mathew A. Marulla" <atm@tiac.net>
- RE: ATM Astronomy Magazine Mismanagement
- From: "Mathew A. Marulla" <atm@tiac.net>
- RE: ATM Telescope mounts
- From: "Mathew A. Marulla" <atm@tiac.net>
- RE: ATM greetings and questions
- From: "Mathew A. Marulla" <atm@tiac.net>
- RE: ATM Poncet Platform * ANNOUNCEMENT *
- From: "Mathew A. Marulla" <atm@tiac.net>
- RE: ATM Jamieson mount?
- From: "Mathew A. Marulla" <atm@tiac.net>
- ATM TM Back Issues?
- From: Matt & Belinda Tarlach <tarlach@earthlink.net>
- ATM When is a sling needed?
- From: Matt & Belinda Tarlach <tarlach@earthlink.net>
- Re: ATM heating pitch
- From: Matt & Belinda Tarlach <tarlach@earthlink.net>
- Re: ATM heating pitch
- From: Matt & Belinda Tarlach <tarlach@earthlink.net>
- ATM Re: RTMC Optical Testing Demonstration
- From: Matt & Belinda Tarlach <tarlach@earthlink.net>
- Re: ATM Mirror Cell, Flotation
- From: Matt & Belinda Tarlach <tarlach@earthlink.net>
- ATM Astrosystems Ultra-low 1.25 to 2 inch adapter
- From: Matt & Belinda Tarlach <tarlach@earthlink.net>
- ATM [Fwd: ]
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: Help with atm-digest]
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM C8 Stepper Drive/ Opto Star-tracker
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Ajay Talwar <ajayt@del2.vsnl.net.in>]]
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Defining Super-Planetary
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM True Stellafane Stories(long)
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Scott Berfield <sberfield@e-planet.com>]]
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM tool damage
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Question about mirrors
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Done polishing?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM JMI Mototrak V Problems
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Mirror questions...
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Mirror questions...
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Mirror questions...
- From: Mel Bartels <mbartels@efn.org>
- ATM atm gearing
- From: Mel Bartels <mbartels@efn.org>
- ATM Cheap Drives - The Long Winding Learning Curve
- From: Mel Bartels <mbartels@efn.org>
- ATM TM reprints, updates?
- From: Mel Bartels <mbartels@efn.org>
- ATM kalmbach replies
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Encoders for DSC
- From: Mel Bartels <mbartels@efn.org>
- ATM gearing discussion cont
- From: Mel Bartels <mbartels@efn.org>
- ATM TM, an alternative to
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Newbie Questions
- From: Mel Bartels <mbartels@efn.org>
- re: ATM Astronomy and TM
- From: Mel Bartels <mbartels@efn.org>
- ATM PC prices continue to drop
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Is there a FAQ?
- From: Mel Bartels <mbartels@efn.org>
- ATM trial postings of atm-digest to s.a.a.
- From: Mel Bartels <mbartels@efn.org>
- ATM job opportunites in optics
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Where do I start refiguring?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM TM Back Issues?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Various questions about mirror making
- From: Mel Bartels <mbartels@efn.org>
- ATM atm list digests available
- From: Mel Bartels <mbartels@efn.org>
- ATM atm forming in Atlanta area
- From: Mel Bartels <mbartels@efn.org>
- [Fwd: Re: RTMC and the ATM List- It's Almost Showtime!]
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: Re: Equatorial mount musings]
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Re: RTMC Optical Testing Demonstration
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM missing tiles
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM New Mirror
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Fast Figuring
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM New Mirror
- From: Mel Bartels <mbartels@efn.org>
- ATM foucault test webpage
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Some polishing questions
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [davidgb@nt.com]]
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM New Mirror
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Spherizing at the end of rough grinding; Carbo consumption
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [rgb@postman.ncube.com (Bob Bond)]]
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM PC prices continue to drop
- From: Mel Bartels <mbartels@efn.org>
- ATM [what to do?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Interchangable secondary mirrors
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM optica bc
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM What diagonal and focuser dimensions?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM PC prices continue to drop
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Mirror Cell, Floatation
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Mirror/Foucault readings
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM "The New S&T"
- From: Mel Bartels <mbartels@efn.org>
- ATM Sky and Tel change
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Flat tool on Curved blank?
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["Larry W. Phillips" <lwp@akgu01.ak.lucent.com>]]
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM JAVA Spot Diagram Applet
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Mel's System
- From: Mel Bartels <mbartels@efn.org>
- ATM S&T
- From: Mel Bartels <mbartels@efn.org>
- ATM coatings and manufacturers
- From: Mel Bartels <mbartels@efn.org>
- ATM Randy Johnson, and other amateurs, and RTMC
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Drawing Exchange Format?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Collimation
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Let's Work on a Basic, Donatable Telescope
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Foucault trouble
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Very wide field eyepieces
- From: Mel Bartels <mbartels@efn.org>
- ATM atm activities at TSP
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM project idea
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Coating Stains
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Dave <davel@nojunk.cc.usu.edu>]]
- From: Mel Bartels <mbartels@efn.org>
- ATM coating disagreement, and other threads: comment from list owner
- From: Mel Bartels <mbartels@efn.org>
- ATM undercorrection
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Coating Stains
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Cooling fans?...
- From: Mel Bartels <mbartels@efn.org>
- ATM Galaxy Optics - the future
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM RE: atm pipe fittings
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Dob Driver
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Idea: Voice Synthesized Grand Tour
- From: Mel Bartels <mbartels@efn.org>
- Re: Fwd: ATM Dob Driver
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM focal length
- From: Mel Bartels <mbartels@efn.org>
- No Subject
- From: michael chibnik <chibnikm@std.teradyne.com>
- Re: ATM Inexpensive eyepieces
- From: michael chibnik <chibnikm@std.teradyne.com>
- Re: ATM Mel's System
- From: michael chibnik <chibnikm@std.teradyne.com>
- Re: ATM Re: atm-digest V1 #701
- From: Michael Juengling <mjuengling@worldnet.att.net>
- Re: ATM RE: atm pipe fittings
- From: Michael Juengling <mjuengling@worldnet.att.net>
- ATM 102mm howitzer shell packing tubes
- From: mkoloski@orednet.org (Michael Koloski)
- ATM Dumb questions
- From: mkoloski@orednet.org (Michael Koloski)
- ATM lens for finderscope
- From: mkoloski@orednet.org (Michael Koloski)
- ATM Format change for Sky and Telescope
- From: mkoloski@orednet.org (Michael Koloski)
- ATM "Rocktite " for tile tool
- From: mkoloski@orednet.org (Michael Koloski)
- ATM S&T format
- From: mkoloski@orednet.org (Michael Koloski)
- ATM what mount for fixed observatory
- From: mkoloski@orednet.org (Michael Koloski)
- Re: ATM Homemade refractor
- From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
- Re: Re[4]: ATM Battery Considerations
- From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
- Re: ATM Aperture Stops and Seeing
- From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
- Re: ATM Epson printer
- From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
- ATM How to test
- From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
- ATM Jamieson mount?
- From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
- ATM Forget 7in? 80mm lens Cap
- From: mpacker@stars.sfsu.edu (Michael Packer)
- Re: ATM Planetary Cassegrain
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM Hyperbolizing
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM RC cass design
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Mirror/Foucault readings
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM FW: Back Issues of Telescope Making Magazine
- From: Michael Pendley <mycall@sandia.gov>
- Re: ATM Astronomy Magazine Mismanagement
- From: schmidt@coyote.csusm.edu (Michael Schmidt)
- ATM RTMC
- From: schmidt@coyote.csusm.edu (Michael Schmidt)
- ATM Universal Photonics Polishing Agents
- From: schmidt@coyote.csusm.edu (Michael Schmidt)
- Re: ATM Let's Work on a Basic, Donatable Telescope
- From: schmidt@coyote.csusm.edu (Michael Schmidt)
- Re: ATM Coating Stains
- From: schmidt@coyote.csusm.edu (Michael Schmidt)
- ATM Herschelian Reflex Finder
- From: schmidt@coyote.csusm.edu (Michael Schmidt)
- ATM Herschelian Reflex Finder update
- From: schmidt@coyote.csusm.edu (Michael Schmidt)
- ATM Rotating Tube Ideas
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM Defining Super-Planetary; masks, etc.
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM first lap
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM Tube sag?
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM RTMC Loose ends and the Testing Demo
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM Minor Mirror Tragedy
- From: "Mike " <mikeaber@earthling.net>
- Re: ATM Spherizing at the end of rough grinding; Carboconsumption
- From: "Mike " <mikeaber@earthling.net>
- Re: ATM Collimation
- From: "Mike " <mikeaber@earthling.net>
- Re: ATM Carriage returns.
- From: "Mike Abercrombie" <mikeaber@earthling.net>
- Re: ATM Astronomy Magazine & Telescope Making
- From: "Mike Marchand" <marchanm@kent.net>
- Re: ATM HELP! exact 2" eyepiece OD?
- From: "Mike Marchand" <marchanm@kent.net>
- Re: ATM "The New S&T"
- From: "Mike Marchand" <marchanm@kent.net>
- Re: ATM Re: Coatings - broken mirrors
- From: "Mike Marchand" <marchanm@kent.net>
- Re: ATM "The New S&T"
- From: "Mike Marchand" <marchanm@kent.net>
- Re: ATM finder for cheap, graphic xfer
- From: "Mike Marchand" <marchanm@kent.net>
- Re: ATM the ongoing resistor saga
- From: "Mike Sabin" <msabin@cdc.net>
- ATM Re: atm-digest V1 #674
- From: minotar7@neosplice.com
- Re: ATM Coating Stains
- From: Nancy_D'Antuono@brown.edu
- ATM Mystery Mirror
- From: "Nathan L. Allen" <nathan@ebs330.eb.uah.edu>
- ATM 8 inch mirror
- From: "Nathan L. Allen" <nathan@ebs330.eb.uah.edu>
- Re: ATM pitch in microwave ovens
- From: "Nathan L. Allen" <nathan@ebs330.eb.uah.edu>
- Re: ATM "Say it ain't so!"
- From: Neil Pegg <Neil.Pegg@src.bae.co.uk>
- ATM Scope-on-Trailer
- From: Nick Liepins <nliepins@willamette.edu>
- ATM AutoTrack 2200
- From: Nick Liepins <nliepins@willamette.edu>
- Re: ATM Dobsonian mount
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Defining Super-Planetary
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Collimation followup.
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Off axis parabolas
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- Re ATM Barlow, Focal extender...
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Offset Mask and humble pie
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Off axis parabolas
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Tube sag?
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Tube sag?
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Diffraction Limited 16"
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Mirror Cell, Floatation
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- Re: ATM DIY LED Flashlight Conversion
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- Re: ATM DIY LED Flashlight Conversion
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- ATM autocollimator
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- Mirror suppliers and the new gallery of ATM projects
- From: "Olle Eriksson" <olle.eriksson@norrkoping.mail.telia.com>
- ATM Different altitude-bearings for a Dobsonian mounting
- From: "Olle Eriksson" <olle.eriksson@norrkoping.mail.telia.com>
- ATM What diagonal and focuser dimensions?
- From: "Olle Eriksson" <olle.eriksson@norrkoping.mail.telia.com>
- ATM Using cardboard to build scopoe
- From: Patrick & Bronwyn Scharf <scharfpb@eis.net.au>
- Re: Re[2]: ATM Battery Considerations
- Re: Re[4]: ATM Battery Considerations
- Re: Re[4]: ATM Battery Considerations
- Re: ATM Mirror questions now Mirror Termal Effects
- Re: ATM "The New S&T"
- Re: ATM RE: atm pipe fittings
- From: Paul & Meg Noah <noah024@ibm.net>
- Re: ATM Earth and Sky Primary Mirror
- From: Paul Gonzalez <pgonzalez@monmouth.com>
- Re: ATM portable dob
- From: Paul Gonzalez <pgonzalez@monmouth.com>
- Re: ATM Earth and Sky Primary Mirror
- From: Paul Gonzalez <pgonzalez@monmouth.com>
- Re: ATM led flashlight conversion
- From: Paul Gonzalez <pgonzalez@monmouth.com>
- ATM Dobsonian mount
- From: Paul Mullin <pmullin@worldnet.att.net>
- ATM Buying mirrors
- From: Paulo Manuel Simoes - LEF <pss@students.si.fct.unl.pt>
- ATM Building a Cassegarian
- From: Paulo Manuel Simoes - LEF <pss@students.si.fct.unl.pt>
- ATM RTMC events report
- From: Peter Abrahams <telscope@europa.com>
- Re: ATM Dielectric Coatings
- From: notpete@scn.org (Peter Hirtle)
- Re: ATM Mel's System
- From: notpete@scn.org (Peter Hirtle)
- ATM S&T and telescope making
- From: notpete@scn.org (Peter Hirtle)
- Re:ATM PC prices continue to drop
- From: "Peter J. Thomas" <pjthomas@snet.net>
- ATM Mini Mag-Lite with an LED
- From: "Peter J. Thomas" <pjthomas@snet.net>
- ATM Very wide field eyepieces
- From: Peter or Marian Robinson <41beaver@vicnet.net.au>
- ATM Re: TM Magazine
- ATM Amateur Astronomy magazine
- ATM Astronomy Magazine Mismagement OFF TOPIC
- From: Pshankland@flakeysol.com
- ATM Magazines
- From: Pshankland@flakeysol.com
- ATM Share the Ride from Pacific Northwest?
- From: Randy Johnson <randyj@nwlink.com>
- ATM Share the Ride to RTMC from Pacific Northwest?
- From: Randy Johnson <randyj@nwlink.com>
- Re: ATM pitch laps help
- From: Randy Johnson <randyj@nwlink.com>
- RTMC and the ATM List- It's Almost Showtime!
- From: Randy Johnson <randyj@nwlink.com>
- ATM RTMC Loose ends and the Testing Demo
- From: Randy Johnson <randyj@nwlink.com>
- ATM Mirror Making Amongst the Trees at RTMC
- From: Randy Johnson <randyj@nwlink.com>
- ATM pitch in microwave ovens
- From: Redwad <redwad@telebyte.net>
- Re: ATM pitch in microwave ovens
- From: Redwad <redwad@telebyte.net>
- ATM A contest
- From: Redwad <redwad@telebyte.net>
- Re: ATM Mercury flats
- From: ab866@freenet.durham.org (ric rokosz)
- Re: ATM Defining Super-Planetary
- From: ab866@freenet.durham.org (ric rokosz)
- ATM Stellar Spectrometer
- From: ab866@freenet.durham.org (ric rokosz)
- Re: ATM TM Mags--outdated??
- From: ab866@freenet.durham.org (ric rokosz)
- Re: ATM "The New S&T": A suggestion.
- From: ab866@freenet.durham.org (ric rokosz)
- ATM Galaxy going out of business?
- From: ab866@freenet.durham.org (ric rokosz)
- Re: ATM undercorrection
- From: ab866@freenet.durham.org (ric rokosz)
- Re: ATM Coating Stains
- From: "Richard H. Jarnagin" <afn31987@afn.org>
- Re: ATM Coating Stains
- From: "Richard H. Jarnagin" <afn31987@afn.org>
- Re: ATM Off axis mask
- From: "Richard Keppler" <rkeppler@telusplanet.net>
- Re: ATM Off Axis mask
- From: "Richard Keppler" <rkeppler@telusplanet.net>
- Re: ATM Offset Mask and humble pie
- From: "Richard Keppler" <rkeppler@telusplanet.net>
- Re: ATM The New S&T
- From: "Richard Keppler" <rkeppler@telusplanet.net>
- Re: ATM Astrosystems Ultra-low 1.25 to 2 inch adapter
- From: "Richard Keppler" <rkeppler@telusplanet.net>
- Re: ATM Collimation
- From: "Richard Keppler" <rkeppler@telusplanet.net>
- Re: ATM Re: coatings & such + question ( long )
- From: "Richard Keppler" <rkeppler@telusplanet.net>
- Re: ATM Very wide field eyepieces
- From: "Richard Keppler" <rkeppler@telusplanet.net>
- Re: ATM Additional...
- From: "Richard Keppler" <rkeppler@telusplanet.net>
- Re: ATM Invisible spider vanes....
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Mercury flats
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Mercury flats (OFF TOPIC)
- From: Richard Schwartz <richas@idt.net>
- ATM Re: hot plants
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Lenses for finders?
- From: Richard Schwartz <richas@idt.net>
- Fwd: Re: ATM Lenses for finders?
- From: Richard Schwartz <richas@idt.net>
- Re: ATM small rasied center of mirror
- From: Richard Schwartz <richas@idt.net>
- Re: ATM 13.75" Biscuit cutter
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Off axis mask
- From: Richard Schwartz <richas@idt.net>
- Re: ATM HELP! exact 2" eyepiece OD?
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Scum
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Aperture Stops and Seeing
- From: Richard Schwartz <richas@idt.net>
- Re: ATM first lap
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Fwd: Question on SONOTUBES and Dewaxing
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Mirror questions...
- From: Richard Schwartz <richas@idt.net>
- Fwd: Re: ATM Mirror questions...
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Mirror questions...
- From: Richard Schwartz <richas@idt.net>
- ATM Help! (Binocular Repair)
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Mirror questions...
- From: Richard Schwartz <richas@idt.net>
- ATM Fwd: Mail failure Attention Sean Scott!
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Planetary Cassegrain
- From: Richard Schwartz <richas@idt.net>
- ATM Astronomy Magazine Mismanagement
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Astronomy Magazine Mismanagement
- From: Richard Schwartz <richas@idt.net>
- Re: ATM pitch laps help
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Cassegrain
- From: Richard Schwartz <richas@idt.net>
- Re: ATM pitch laps help
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Mirror Questions now Mirror Thermal Effects
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Tube sag?
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Spherizing at the end of rough grinding; Carboconsumption
- From: Richard Schwartz <richas@idt.net>
- Re: Re[2]: ATM Re: coatings (was Dielectric Coatings)
- From: Richard Schwartz <richas@idt.net>
- Re: ATM The New S&T
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Flat tool on Curved blank?
- From: Richard Schwartz <richas@idt.net>
- Re: ATM "The New S&T"
- From: Richard Schwartz <richas@idt.net>
- Re: ATM DIY LED Flashlight Conversion
- From: Richard Schwartz <richas@idt.net>
- ATM RTMC - Itching to Come Home
- From: Richard Schwartz <richas@idt.net>
- ATM Resistors
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Drawing Exchange Format?
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Let's Work on a Basic, Donatable Telescope
- From: Richard Schwartz <richas@idt.net>
- Re: ATM cutting glass
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Resistors
- From: Richard Schwartz <richas@idt.net>
- ATM Fwd: Returned mail: Host unknown (Name server: antares.m42.nwscc.sea06.navy.mil:
- From: Richard Schwartz <richas@idt.net>
- Re: ATM making a pitch lap
- From: Richard Schwartz <richas@idt.net>
- ATM BBS Help Needed
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Magazine
- From: rwalker@flint.org (richard walker)
- ATM led flashlight conversion
- From: rwalker@flint.org (richard walker)
- ATM portable dob
- ATM Stop it!!
- ATM Atm cleaning mirrors
- ATM Annealing
- From: "Rick" <acrohead@ix.netcom.com>
- ATM Building a Cassegarian
- From: rhill@LPL.Arizona.EDU (Rik Hill)
- ATM Building a Cassegarian
- From: rhill@LPL.Arizona.EDU (Rik Hill)
- ATM Building a Cassegarian
- From: rhill@LPL.Arizona.EDU (Rik Hill)
- Re: ATM Computer video for CCD
- From: rhill@LPL.Arizona.EDU (Rik Hill)
- Re: ATM Cassegrain
- From: rhill@LPL.Arizona.EDU (Rik Hill)
- ATM aperture stops again
- From: rhill@LPL.Arizona.EDU (Rik Hill)
- Re: ATM pitch in microwave ovens
- From: rhill@LPL.Arizona.EDU (Rik Hill)
- Re: ATM pitch in microwave ovens
- From: rhill@LPL.Arizona.EDU (Rik Hill)
- Re: ATM pitch in microwave ovens
- From: rhill@LPL.Arizona.EDU (Rik Hill)
- Re: ATM Cass Secondary-BSC Optics
- From: rhill@LPL.Arizona.EDU (Rik Hill)
- ATM Re: coatings & such
- From: rhill@LPL.Arizona.EDU (Rik Hill)
- Re: ATM Mercury flats
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Mercury flats
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM 3 Wormgears and only 1 Worm
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM True Stellafane Stories(long)
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Homemade refractor
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- ATM 13" SCT update
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM 13" SCT long
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Collimation JSO Schmitt Camera
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- ATM 13.75" Biscuit cutter
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: What size Drill Press for ATM?
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: Re ATM Barlow, Focal extender...
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Done polishing?
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Scum
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM HELP! exact 2" eyepiece OD?
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Mirror questions...
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM TM Mags--outdated??
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Mirror questions...
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Planetary Cassegrain
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Tube sag?
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Tube sag?
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Telescope mounts
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM 18 point Mirror mount
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Magazine
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM grinding Machines
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Magazine
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM trial postings of atm-digest to s.a.a.
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- ATM Cast iron tools
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Cast iron tools
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM heating pitch
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Metal Tools
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM pitch in microwave ovens
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Tube sag?
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Beginners resource for machining?
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Jamieson mount?
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Flat tool on Curved blank?
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM "The New S&T"
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM "The New S&T": A suggestion.
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM DIY LED Flashlight Conversion
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- ATM RMS Conversion ( crude)
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM "The New S&T"
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: SV: ATM RMS Conversion ( crude)
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Re: coatings & such
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Schmidt Camera from SCT parts?
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Foucault trouble
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Stop it!!
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM, mirror grinding talk
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM RE: atm pipe fittings
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM what mount for fixed observatory
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Stop it!!
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM I HATE Dobsonians (THAT got your attention!)
- From: PFAFF2@delphi.com (Robert C. Pfaff)
- Re: ATM Invisible spider vanes....
- From: RDuvall@pixworks.com (Robert Duvall)
- ATM *** SOFTWARE ANNOUNCEMENT***
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Mercury flats (OFF TOPIC)
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Mirror questions...
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Question about mirrors
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Question about mirrors
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Offset Mask and humble pie
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Aperture Stops and Seeing
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Mirror questions...
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM stepper motors from floppy drives...
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Mirror questions now Mirror Termal Effects
- From: RDuvall@pixworks.com (Robert Duvall)
- ATM Thermal Effects on Mirrors
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Mirror questions...
- From: RDuvall@pixworks.com (Robert Duvall)
- RE: ATM Mirror questions...
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Mirror questions...
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Mirror Questions now Mirror Thermal Effects
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM The Telescope Making series
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Tube sag?
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Mirror questions now Mirror Termal Effects
- From: RDuvall@pixworks.com (Robert Duvall)
- ATM Poncet Platform * ANNOUNCEMENT *
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Magazine
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Aligning Secondary stalk
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM pitch in microwave ovens
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Mirror/Foucault readings
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM horror story
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Mel's System
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Flat tool on Curved blank?
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM testing method
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM making a pitch lap
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: Resistors waste energy WAS:ATM DIY LED Flashlight Conversion
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Foucault trouble
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Re: Foucault test
- From: RDuvall@pixworks.com (Robert Duvall)
- ATM Re: Foucault
- From: RDuvall@pixworks.com (Robert Duvall)
- Re: ATM Dumb questions
- From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
- ATM RE: Jeff Schroder's 11" refractor
- From: ceragioli@UH.EDU (Roger C. Ceragioli)
- Re: ATM substitutes for teflon in dobsons?
- From: rutherfordt@ten-nash.ten.k12.tn.us
- ATM finder lens
- From: rutherfordt@ten-nash.ten.k12.tn.us
- Re: ATM 80/20
- From: "S.Duncan" <swduncan@worldnet.att.net>
- ATM missing tiles
- From: Scott <smarsh@mail.geocities.com>
- ATM making a pitch lap
- From: Scott <smarsh@mail.geocities.com>
- ATM testing method
- From: Scott <smarsh@mail.geocities.com>
- ATM cleaning primary mirror
- From: Scott <smarsh@mail.geocities.com>
- ATM Poalr alignment reticle
- From: Scott Berfield <berfield@pacbell.net>
- Re: ATM portable dob
- From: Scott Berfield <berfield@pacbell.net>
- ATM S&T back issues
- From: Scott Berfield <berfield@pacbell.net>
- ATM project idea
- From: Scott Berfield <berfield@pacbell.net>
- ATM Encoders for DSC
- From: Scott Berfield <berfield@pacbell.net>
- Re: ATM pitch in microwave ovens
- From: Scott Berfield <berfield@pacbell.net>
- Re: ATM Binoc TV Tubes
- From: Scott Berfield <berfield@pacbell.net>
- ATM Project idea
- From: Scott Berfield <berfield@pacbell.net>
- Re: ATM ProtoStar Components
- From: Scott Berfield <berfield@pacbell.net>
- Re: ATM Planetary Cassegrain-- f 30
- From: Scott Cooke <scottc@sprintmail.com>
- Re: ATM ProtoStar spider/diagonal ?
- From: Scott Cooke <scottc@sprintmail.com>
- Re: ATM Star Lap Spreadsheet - improved version
- From: Scott Milligan <wavedude@tiac.com>
- Re: ATM True Stellafane Story
- From: Scott Milligan <wavedude@tiac.com>
- Re: ATM Off axis parabolas
- From: Scott Milligan <wavedude@tiac.com>
- ATM Re: correcting spherical aberration in a C-11
- From: Scott Milligan <wavedude@tiac.com>
- Re: ATM Scum
- From: Scott Milligan <wavedude@tiac.com>
- ATM Re: telescope designs
- From: Scott Milligan <wavedude@tiac.com>
- Re: ATM Mirror Shape Change At Thermal Equil.
- From: Scott Milligan <wavedude@tiac.com>
- Re: ATM Mirror Questions now Mirror Thermal Effects
- From: Scott Milligan <wavedude@tiac.com>
- Re: ATM Planetary Cassegrain-- f 30
- From: Scott Milligan <wavedude@tiac.com>
- ATM Re: telescope designs-A partial Retraction
- From: Scott Milligan <wavedude@tiac.com>
- Re: ATM Cass Secondary
- From: Scott Milligan <wavedude@tiac.com>
- ATM Re: medial article at http://www.stellafane.com/mill1.htm
- From: Scott Milligan <wavedude@tiac.com>
- ATM New Mirror
- From: Scott Rychnovsky <srychnov@uci.edu>
- Re: ATM New Mirror
- From: Scott Rychnovsky <srychnov@uci.edu>
- Re: ATM Flat tool on Curved blank?
- From: Scott Rychnovsky <srychnov@uci.edu>
- Re: ATM Coating Stains
- From: Scott Rychnovsky <srychnov@uci.edu>
- ATM The Telescope Making Magazine
- From: Sean Scott <sscott@prxm.com>
- RE: ATM Mirror questions...
- From: Sean Scott <sscott@prxm.com>
- RE: ATM Mirror questions...
- From: Sean Scott <sscott@prxm.com>
- ATM FW: TM mags...continued
- From: Sean Scott <sscott@prxm.com>
- RE: ATM TM Mags--outdated??
- From: Sean Scott <sscott@prxm.com>
- FW: ATM Telescope mounts
- From: Sean Scott <sscott@prxm.com>
- FW: ATM TV screen glass for mirrors
- From: Sean Scott <sscott@prxm.com>
- ATM microwaves/TV/telescopes/Cat Food
- From: Sean Scott <sscott@prxm.com>
- ATM Beginners resource for machining?
- From: Sean Scott <sscott@prxm.com>
- ATM The New S&T
- From: Sean Scott <sscott@prxm.com>
- FW: ATM "The New S&T": A suggestion.
- From: Sean Scott <sscott@prxm.com>
- ATM Epoxy for plaster tools
- From: Sean Scott <sscott@prxm.com>
- ATM Machine tools - thanks!
- From: Sean Scott <sscott@prxm.com>
- ATM Collimation
- From: Sean Scott <sscott@prxm.com>
- ATM coatings
- From: Silvio Jaconelli <RHWD40@WACCVM.corp.mot.com>
- ATM Re: Coatings - broken mirrors
- From: Silvio Jaconelli <RHWD40@WACCVM.corp.mot.com>
- Re: ATM Mercury flats
- From: Spencer Roedder <roedder@roedder.com>
- Re: ATM Mercury flats
- From: Spencer Roedder <roedder@roedder.com>
- Re: Re[4]: ATM Battery Considerations
- From: Spencer Roedder <roedder@roedder.com>
- Re: ATM pitch laps help
- From: Spencer Roedder <roedder@roedder.com>
- Re: ATM Scope-on-Trailer
- From: Spencer Roedder <roedder@roedder.com>
- Re: ATM Scope-on-Trailer
- From: Spencer Roedder <roedder@roedder.com>
- Fwd: ATM Dob Driver
- ATM Pitch lab, microfacetts, optic programs
- From: Stefan Beck <100547.256@compuserve.com>
- ATM Magazine / Journal
- From: Stefan Beck <100547.256@compuserve.com>
- Re: ATM Cookbook 245 Cooling
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Dumb questions
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Lenses for finders?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Homemade refractor
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM lens for finderscope
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Where to find Newt?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM True Stellafane Stories(long)
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM tool damage
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Tube Sag
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Forget 7in? 80mm lens Cap
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Epson printer
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM TM Mags--outdated??
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Is there a FAQ?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- ATM trial postings of atm-digest to s.a.a. (long)
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM plate glass
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Cast iron tools
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Cast iron tools
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Amateur Astronomy magazine
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM heating pitch
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Determining good tool/mirror contact.
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM heating pitch
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Grinding Refractor Objectives
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM TV screen glass for mirrors
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Cast iron tools
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM pitch in microwave ovens
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM New Mirror
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM pitch in microwave ovens
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM New Mirror
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM New Mirror
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Spherizing at the end of rough grinding; Carboconsumption
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM LED Flashlight
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM "Say it ain't so!"
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM "The New S&T"
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM DIY LED Flashlight Conversion
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM horror story
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Aluminising in Germany ?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM horror story
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM New To List... Have Some Questions!!!
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Mel's System
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM S&T and telescope making
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM cutting glass
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM undercorrection
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM RE: atm pipe fittings
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Herschelian Reflex Finder update
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Idea: Voice Synthesized Grand Tour
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM led flashlight conversion
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Diagonal Question
- From: Steve Bell <sb635@delphi.com>
- Re: ATM Defining Super-Planetary
- From: Steve Bell <sb635@delphi.com>
- Re: ATM Off axis mask
- From: Steve Bell <sb635@delphi.com>
- Re: ATM Question about mirrors
- From: Steve Bell <sb635@delphi.com>
- Re: ATM Diffraction limited newt mirrors
- From: Steve Bell <sb635@delphi.com>
- Re: ATM Refractor Fever, a Cure
- From: Steve Bell <sb635@delphi.com>
- Re: ATM Refractor Fever, a Cure
- From: Steve Bell <sb635@delphi.com>
- Re: ATM Mel's System
- From: Steve Bell <sb635@delphi.com>
- Re: ATM RMS Conversion ( crude)
- From: Steve Bell <sb635@delphi.com>
- Re: ATM undercorrection
- From: Steve Bell <sb635@delphi.com>
- ATM Collimation, the Truth?
- From: Steve Bell <sb635@delphi.com>
- ATM Dielectric Coatings
- From: Steve Follett <sfollett@wco.com>
- ATM Pitch lab, microfacetts, optic programs
- From: Steve Meyering <smeyerin@pe.net>
- ATM Mirror Shape Change At Thermal Equil.
- From: Steve Scampini <scampini@hp-mpg.an.hp.com>
- ATM Binoc TV Tubes
- From: Steve Scampini <scampini@hp-mpg.an.hp.com>
- ATM Foucault Accuracy
- From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
- Re: ATM True Stellafane Story
- From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
- ATM Aperture Stops and Seeing
- From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
- ATM Re: Sonotube and Dewaxing
- From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
- ATM Re: Telescope Making, Outdated?
- From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
- Re: ATM Different altitude-bearings
- From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
- ATM Re: Spheroidal Mirrors
- From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
- ATM Re:
- From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
- Re: ATM Lenses for finders?
- From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
- ATM plaster of Paris (was "in the microwave")
- From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
- ATM tiny multi-position switches
- From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
- Re: ATM tiny multi-position switches
- From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
- Re: ATM DIY LED Flashlight Conversion
- From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
- Re: ATM Astrosystems Ultra-low 1.25 to 2 inch adapter
- From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
- Re: ATM Re: Resistors, Energy, and flashlights
- From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
- Re: Resistors waste energy WAS:ATM DIY LED Flashlight Conversion
- From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
- Re: ATM Herschelian Reflex Finder
- From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
- Re: ATM Epoxy for plaster tools
- From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
- Re: ATM Herschelian Reflex Finder
- From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
- ATM Where to find Newt?
- From: SWDUNCAN@qtiworld.com
- ATM Mirror questions...
- From: SWDUNCAN@qtiworld.com
- ATM Tube Sag
- From: SWDUNCAN@qtiworld.com
- Re: ATM Mirror questions...
- From: SWDUNCAN@qtiworld.com
- ATM Tube sag?
- From: SWDUNCAN@qtiworld.com
- ATM Tube sag?
- From: SWDUNCAN@qtiworld.com
- Re: ATM Tube sag?
- From: SWDUNCAN@qtiworld.com
- Re: ATM Tube sag?
- From: SWDUNCAN@qtiworld.com
- Re: ATM Tube sag?
- From: SWDUNCAN@qtiworld.com
- Re: ATM Tube sag?
- From: SWDUNCAN@qtiworld.com
- Re: SV: ATM Tube sag?
- From: SWDUNCAN@qtiworld.com
- Re: ATM LED Flashlight
- From: SWDUNCAN@qtiworld.com
- ATM Batch reply and comments
- From: tasimmons@CCGATE.HAC.COM
- ATM Collimation JSO Schmitt Camera
- From: Ted Dobosz <edobosz@tig.com.au>
- ATM Aligning Secondary stalk
- From: thomrob@iamerica.net
- ATM, mirror grinding talk
- From: thomrob@iamerica.net
- ATM Magazine
- From: "Toivola,Bert" <toivola@mail.labmed.washington.edu>
- ATM Gear Reducers
- From: Tom Alexander <toma@apk.net>
- ATM Mirror making video.
- From: Tom Alexander <toma@apk.net>
- ATM Lightweight Composite Mirrors
- From: Tom Cathey <K1JJ@snet.net>
- ATM Idea: Voice Synthesized Grand Tour
- From: Tom Cathey <K1JJ@snet.net>
- ATM Staining of glass?
- From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
- Re: ATM Defining Super-Planetary
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Scum
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Done polishing?
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM HELP! exact 2" eyepiece OD?
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- ATM Aluminum tool - first impressions
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Planetary Cassegrain-- f 30
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Telescope mounts
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM heating pitch
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Inexpensive eyepieces
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Hyperbolizing
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM pitch in microwave ovens
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- ATM Grit series - too few or too many?
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Some polishing questions
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Interchangable secondary mirrors
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Mirror/Foucault readings
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Glare stop sizing in refractor
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Mirror/Foucault readings
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM New To List... Have Some Questions!!!
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM Flat tool on Curved blank?
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM How to test
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM How to test
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- ATM Making sturdy binocular tripods
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: ATM S&T format
- From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
- Re: [Fwd: Re: ATM Spiders and Metal Ribbon for vanes]
- From: Tom.Stock@gsbsc.gensig.com
- ATM Secondary holder design (thanks!)
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM Benefits of a 2" focuser
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM Off axis mask
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM Building a Cassegarian
- From: Tom.Stock@gsbsc.gensig.com
- Re[2]: ATM Off axis mask
- From: Tom.Stock@gsbsc.gensig.com
- Re[2]: ATM Scum
- From: Tom.Stock@gsbsc.gensig.com
- ATM Source for 1/4" Low Profile Focusers?
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM Astronomy Magazine Mismanagement
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM TM, an alternative to
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM Cast iron tools
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM Cat food can tool
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM sonotube hunt
- From: Tom.Stock@gsbsc.gensig.com
- Re[2]: ATM Re: coatings (was Dielectric Coatings)
- From: Tom.Stock@gsbsc.gensig.com
- ATM Optical Cat Food Cans for Sale
- From: Tom.Stock@gsbsc.gensig.com
- Re[2]: ATM "The New S&T"
- From: Tom.Stock@gsbsc.gensig.com
- Re[2]: ATM "The New S&T"
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM "New" S&T
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM Staining of glass?
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM Let's Work on a Basic, Donatable Telescope
- From: Tom.Stock@gsbsc.gensig.com
- Re: ATM 245 Cookbook Cooling
- From: "Tony Cecce, Corning, NY" <CECCE_AJ@corning.com>
- ATM Mercury flats.
- From: Travis Morien <phantom@tartarus.uwa.edu.au>
- ATM Rain-X
- From: Travis Morien <phantom@tartarus.uwa.edu.au>
- ATM the ongoing resistor saga
- From: Travis Morien <phantom@tartarus.uwa.edu.au>
- Re: ATM heating pitch
- ATM Grinding Refractor Objectives
- Re: ATM Re: coatings
- Re: ATM Re: Salt Spray & Coatings
- Re: ATM plaster of Paris (was "in the microwave")
- Re: ATM RE: atm pipe fittings
- Re: ATM what mount for fixed observatory
- ATM INFO on Askanai 1000 f/6.3 mirror
- From: aa688@cleveland.Freenet.Edu (William Franko)
- ATM INFO on Askania Mirror temp. compensator
- From: aa688@cleveland.Freenet.Edu (William Franko)
- ATM Re: cardboard tubes
- From: "William H. Shamblin,Jr." <wshamblin@ac.net>
- ATM:Mirror cells and aluminizing
- From: "William H. Shamblin,Jr." <wshamblin@ac.net>
- ATM Re:Mirror cells and aluminizing
- From: "William H. Shamblin,Jr." <wshamblin@ac.net>
- Re: ATM sucking floss
- From: "William H. Shamblin,Jr." <wshamblin@ac.net>
- ATM atm:Magazine complaints
- From: "William H. Shamblin,Jr." <wshamblin@ac.net>
- ATM tool damage
- From: Yvan Blom <yvan@belnet.be>
Mail converted by MHonArc 2.1.0