ATM_May95 by author

• Messages sorted by: [ date ][ thread ][ subject ]

Starting: Sun 26 Jun 1994 - 07:29:54 PDT
Ending: Thu 01 Jun 1995 - 09:08:43 PDT
Messages: 534

• Aart Olsen
  • Re: atm V1 #128 Wed, 31 May 1995 10:20:00 -0500
  • Re: flat strategy Tue, 9 May 1995 12:41:56 -0500
  • Re: Home made glass Tue, 9 May 1995 08:50:58 -0500
  • flat strategy Mon, 8 May 1995 12:48:38 -0500
  • Re: Autoguider reference Tue, 2 May 1995 08:45:45 -0500
  • Re: Photographic scope choices? Mon, 1 May 1995 17:16:34 -0500
  • Re: Autoguider reference Mon, 1 May 1995 09:42:55 -0500
• Alan Kilian
  • Kilian's Mirror: Off to the aluminizer. Sun, 28 May 1995 01:08:52 -0100
  • Kilian's Mount: Bearing spacing. Less or More? Tue, 2 May 1995 00:43:48 GMT
• alfiesty@scruznet.com
  • Stepper Driver for Mel Bartels ALTAZ Thu, 4 May 1995 19:48:36 -0700
• Alfonso R Navarro
  • Re: ccd video camera - suggestions? Mon, 15 May 1995 22:58:27 -0400 (EDT)
• Andy Homeyer
  • Re: RTMC schedule Wed, 3 May 1995 14:22:46 -0701
• Andy Steere
  • Attention RTMC Attendees! Thu, 18 May 1995 11:39:20 -0500 (CDT)
  • Re: ATTN: RTMC Attendees Wed, 3 May 1995 11:30:48 -0500 (CDT)
  • Re: Kilian's Mount: Bearing spacing. Less or More? Wed, 3 May 1995 10:27:27 -0500 (CDT)
• awoodhull@hamp.hampshire.edu
  • RE: Lead Acid Storage Batteries Wed, 22 Jun 94 03:14:24 GMT
• Benson.L.Branch@att.com
  • focuser wobble Wed, 31 May 95 10:12:06 EDT
• Bill Marriott
  • Fizeau Inferometer Upgrade Tue, 16 May 1995 21:13:31 -0700
  • Re: Pitch Mat Fri, 12 May 1995 17:53:23 -0700
  • Re: Tell Pyrex from Silica Thu, 11 May 1995 22:57:57 -0700
  • Fwd: Tropical Pitch / various attempts..... Sun, 7 May 1995 21:24:55 -0700
  • Re: In need of advice on split-ring mount Thu, 4 May 1995 17:27:02 -0700
  • Split-Ring Equi/Uploading CADs Wed, 3 May 1995 23:00:32 -0700
  • Fwd: Grinding elliptical flats Wed, 3 May 1995 22:51:17 -0700
  • Fwd: In need of advice on split-ring mount Wed, 3 May 1995 22:34:00 -0700
• Bill Marriott
  • Re: polishing pads Thu, 25 May 1995 21:10:52 -0700
  • Re: Suggestions for grind table wanted Wed, 24 May 1995 20:59:14 -0700
• Bill Thomas
  • 30" mirror cell parameters - pads.txt [1/1] Tue, 30 May 95 23:57:46 PST
• Bob Bond
  • A couple of examples Fri, 19 May 1995 15:35:09 -0700
  • Re: Ronchi calibration Wed, 17 May 1995 10:59:53 -0700
  • Ronchi calibration Tue, 16 May 1995 10:26:10 -0700
  • Re: batteries Fri, 5 May 1995 14:24:02 -0700
  • Re: batteries Thu, 4 May 1995 09:52:29 -0700
  • Re: coma, coma, coma Mon, 1 May 1995 11:20:08 -0700
• Bob Lombardi
  • Re: batteries Fri, 5 May 1995 07:47:16 -0400 (EDT)
• Bob Luffel
  • Re: collimation Thu, 11 May 95 10:17:34 MDT
  • Re: collimation Thu, 11 May 95 9:51:07 MDT
  • Re: Coma /Collimation Tue, 9 May 95 20:43:28 MDT
  • Re: Spectacle Protection Tue, 9 May 95 20:14:12 MDT
  • Re: Coma /Collimation Tue, 9 May 95 17:07:43 MDT
  • Re: Squaring on the focuser Tue, 9 May 95 17:02:42 MDT
  • Re: 7` LONG TUBE FOR 8" MIRRO Tue, 9 May 95 15:13:11 MDT
  • Re: Coma /Collimation Mon, 8 May 95 18:08:20 MDT
  • Re: 7` LONG TUBE FOR 8" MIRRO Mon, 8 May 95 11:18:30 MDT
  • Re: Coma /Collimation Mon, 8 May 95 11:04:38 MDT
  • Re: batteries Thu, 4 May 95 17:13:26 MDT
  • Re: Eyepieces (was coma, ...) Wed, 3 May 95 11:18:20 MDT
  • Re: coma, coma, coma Tue, 2 May 95 10:01:50 MDT
  • Re: Parametric Optics/Secondary Suppliers Mon, 1 May 95 18:31:09 MDT
  • Re: Kilian's mount: Parts are getting p Mon, 1 May 95 10:38:00 MDT
• Bob Madden
  • Re: flat subjects (fwd) Fri, 12 May 1995 19:56:54 -0700 (PDT)
  • Follow-up on the eyes Thu, 11 May 1995 16:17:10 -0700 (PDT)
  • Re: Fiberglass tubes Tue, 9 May 1995 09:11:49 -0700 (PDT)
  • Re: Fiberglass tubes and altitude bearings Mon, 8 May 1995 19:37:58 -0700 (PDT)
  • Re: 7` LONG TUBE FOR 8" MIRRO Mon, 8 May 1995 17:41:57 -0700 (PDT)
  • Re: Focusers(was: Crayford focuser) Mon, 8 May 1995 17:32:15 -0700 (PDT)
  • re:RTMC power Mon, 8 May 1995 17:28:07 -0700 (PDT)
  • Re: Coma /Collimation Mon, 8 May 1995 12:54:53 -0700 (PDT)
  • Re: more on ATM books Mon, 8 May 1995 12:48:15 -0700 (PDT)
  • Re: Fiberglass tubes Sun, 7 May 1995 11:28:28 -0700 (PDT)
  • Re: 7` LONG TUBE FOR 8" MIRRO Sat, 6 May 1995 09:57:21 -0700 (PDT)
  • Re: Coma /Collimation Fri, 5 May 1995 20:37:24 -0700 (PDT)
  • Re: Kilian's Mount: Bearing spacing. Less or More? Fri, 5 May 1995 20:25:47 -0700 (PDT)
  • Re: Texereau data reduction Fri, 5 May 1995 15:25:39 -0700 (PDT)
  • Re: batteries Fri, 5 May 1995 09:24:31 -0700 (PDT)
  • Re: Split-Ring Equi/Uploading Fri, 5 May 1995 09:16:23 -0700 (PDT)
  • Re: Split-Ring Equi/Uploading Fri, 5 May 1995 08:55:37 -0700 (PDT)
  • Re: Steve Scampinis Dob Article archived Thu, 4 May 1995 08:10:57 -0700 (PDT)
  • Re: TSP Wed, 3 May 1995 22:38:13 -0700 (PDT)
  • Re: Eyepieces thread Wed, 3 May 1995 22:29:33 -0700 (PDT)
  • Re: RTMC schedule Wed, 3 May 1995 22:25:35 -0700 (PDT)
  • Re: RTMC schedule Wed, 3 May 1995 22:13:53 -0700 (PDT)
  • Re: Grinding elliptical flats Wed, 3 May 1995 22:08:01 -0700 (PDT)
  • Re: your mail Wed, 3 May 1995 08:05:05 -0700 (PDT)
  • Re: Dob FAQs Tue, 2 May 1995 15:43:21 -0700 (PDT)
  • Re: Telscope Making Magazine Tue, 2 May 1995 15:40:08 -0700 (PDT)
  • Re: Bobbing for jokes. Tue, 2 May 1995 08:12:34 -0700 (PDT)
  • Re: your mail Mon, 1 May 1995 21:37:34 -0700 (PDT)
  • Re: Ronchi Test Mon, 1 May 1995 20:27:31 -0700 (PDT)
  • Re: Grinding a flat Mon, 1 May 1995 20:24:28 -0700 (PDT)
  • Grinding a flat Mon, 1 May 1995 15:02:16 -0700 (PDT)
  • Re: Kilian's mount: Parts are getting p Mon, 1 May 1995 14:43:30 -0700 (PDT)
  • Re: What I'd like to see Mon, 1 May 1995 14:24:46 -0700 (PDT)
  • Re: Ronchi Test Mon, 1 May 1995 14:14:06 -0700 (PDT)
  • Re: your mail Mon, 1 May 1995 09:04:28 -0700 (PDT)
• Bratislav Curcic
  • Re: Curved Spiders Fri, 19 May 95 11:52:08 EST
  • Re: The Sonotube debate Fri, 19 May 95 11:27:05 EST
  • Re: The Sonotube debate Fri, 19 May 95 11:27:05 EST
  • Re: Fizeau Inferometer Upgrade Thu, 18 May 95 10:12:27 EST
  • Re: Curved spiders Wed, 17 May 95 12:56:33 EST
  • Re: Ronchi calibration Wed, 17 May 95 12:46:46 EST
  • Re: Fiberglass tube update Wed, 17 May 95 12:38:54 EST
  • Re: flat strategy Tue, 9 May 95 09:57:05 EST
  • Re: Split-Ring Equi/Uploading CADs Mon, 8 May 95 10:32:28 EST
  • Re: Grinding a flat Wed, 3 May 95 09:22:08 EST
  • Eyepieces (was coma, ...) Wed, 3 May 95 08:31:29 EST
  • Re: Star Test Question Tue, 2 May 95 09:46:45 EST
  • Re: Star Test Question Tue, 2 May 95 09:42:58 EST
  • Re: Grinding a flat Tue, 2 May 95 09:35:58 EST
  • Re: Photographic scope choices? Tue, 2 May 95 09:29:09 EST
  • Re: Star Test Question Mon, 1 May 95 11:48:50 EST
• Brian Drummond
  • tube counterweights Thu, 18 May 1995 14:05:27 -0800
  • small shed observatory Wed, 10 May 1995 14:35:09 -0800
  • Re: ATTN: RTMC Attendees Wed, 10 May 1995 14:28:00 -0800
• Bruce Schurmann
  • Re: NO SUBJECT (is Dob Tale) Wed, 03 May 1995 22:37:14 -0400
• c21rag@kocrsv01.delcoelect.com
  • Rechargeable Battery Source Wed, 10 May 1995 08:45:21 -0400 (CDT)
  • Re: batteries Fri, 5 May 1995 14:50:37 -0400 (CDT)
  • Re: Battery fix Fri, 5 May 1995 10:01:11 -0400 (CDT)
• Callum J. Potter
  • Re: curved spiders Wed, 17 May 95 13:54:55 BST
• Chris Knight
  • Re: Dob FAQs Tue, 2 May 95 16:37 PDT
• Christopher Kovacs
  • Re: Dob FAQs Tue, 2 May 1995 15:07:15 -0700 (PDT)
• Chuck Grant
  • Re: difference between various catadioptric designs Wed, 24 May 95 04:23:55 -0700
  • Re: Curved Spiders Thu, 18 May 95 13:57:27 -0700
  • Re: Curved spiders Tue, 16 May 95 11:36:04 -0700
  • 1.25" to 2" eyepiece adapter Thu, 11 May 95 11:07:01 -0700
  • Re: collimation Thu, 11 May 95 10:37:17 -0700
  • RE: Home made glass Thu, 11 May 95 10:31:53 -0700
  • Re: Lens support ? Wed, 10 May 95 14:52:36 -0700
  • cheshire Wed, 10 May 95 14:44:04 -0700
  • Re: Lens support ? and wide-angle failure tale Wed, 10 May 95 11:39:33 -0700
  • Re: Coma /Collimation Tue, 9 May 95 10:17:06 -0700
  • Re: Coma /Collimation Tue, 9 May 95 07:37:22 -0700
  • Re: Coma /Collimation Mon, 8 May 95 14:25:15 -0700
  • Re: Coma /Collimation Mon, 8 May 95 14:02:37 -0700
  • Re: Crayford focuser Mon, 8 May 95 10:53:49 -0700
  • Re: Aperture Mask Mon, 8 May 95 08:22:24 -0700
  • Re: Crayford focuser Mon, 8 May 95 07:16:36 -0700
  • Re: Coma /Collimation Sat, 6 May 95 03:08:34 -0700
  • Re: batteries,charging Fri, 5 May 95 23:52:23 -0700
  • Re: Coma /Collimation Fri, 5 May 95 22:54:32 -0700
  • Re: Coma /Collimation Fri, 5 May 95 22:37:20 -0700
  • Re: batteries Thu, 4 May 95 15:43:11 -0700
  • RTMC schedule Wed, 3 May 95 11:10:59 -0700
  • Re: Star Test Question Tue, 2 May 95 02:24:55 -0700
  • Bobbing for jokes. Tue, 2 May 95 02:08:46 -0700
  • Re: Autoguider reference Mon, 1 May 95 19:29:57 -0700
  • Re: coma, coma, coma Mon, 1 May 95 19:10:28 -0700
  • Re: Ronchi Test Mon, 1 May 95 18:25:09 -0700
  • Re: Grinding a flat Mon, 1 May 95 18:12:09 -0700
• Chuck Tribolet
  • Re: batteries (fwd) Mon, 8 May 95 08:07:56 PDT
• CSTOM@stmarytx.edu
  • Re: small shed observatory Thu, 18 May 1995 23:17:37 -0600 (CST)
  • Re: ccd video camera - suggestions? Wed, 17 May 1995 17:59:43 -0600 (CST)
  • Re: Polar Alignment 'Scope Mon, 08 May 1995 16:09:05 -0600 (CST)
  • Re: Eyepieces thread Fri, 05 May 1995 08:35:59 -0600 (CST)
  • Re: RTMC schedule Thu, 04 May 1995 08:28:26 -0600 (CST)
  • Re: TSP Thu, 04 May 1995 08:22:31 -0600 (CST)
  • Re: Eyepieces (was coma, ...) Wed, 03 May 1995 08:50:14 -0600 (CST)
  • Re: Eyepieces (was coma, ...) Tue, 02 May 1995 22:27:57 -0600 (CST)
• Dan Doner
  • RE: Home made glass Thu, 11 May 1995 11:45:51 -0600 (MDT)
  • Re: Home made glass Tue, 9 May 1995 10:42:21 -0600 (MDT)
• Dan Feldkhun
  • More Sonotubes Thu, 18 May 95 23:38:10
  • Re: Split-Ring Equi/Uploading Fri, 5 May 95 16:32:21
  • Re: In need of help on split-ring Fri, 5 May 95 16:15:25
  • clarification on split-ring mnt. post Thu, 4 May 95 18:50:23
  • In need of advice on split-ring mount Wed, 3 May 95 19:45:16
• Dave
  • Re: Spectacle Protection Tue, 09 May 1995 20:45:13 -0400
  • Re: 7` LONG TUBE FOR 8" MIRRO Mon, 8 May 1995 21:34:32 -0400
• DAVE MCCARTER
  • Re: Spectacle Protection Tue, 9 May 1995 22:28:20 -0400 (EDT)
  • Re: Melting Glass Tue, 9 May 1995 22:20:23 -0400 (EDT)
  • Re: your mail Wed, 3 May 1995 20:20:11 -0400 (EDT)
  • RE: coma, coma, coma Mon, 1 May 1995 14:27:40 -0400 (EDT)
  • Best of ATM Mon, 1 May 1995 14:19:06 -0400 (EDT)
  • Re: Suggestions for a beginner wanted Mon, 1 May 1995 14:04:06 -0400 (EDT)
• David Boll
  • Focusers Fri, 26 May 95 9:21:56 PDT
  • f-ratios, secondaries, and the Vignetting program Fri, 26 May 95 9:05:20 PDT
  • Tubes, FOV, vignetting Sat, 20 May 95 7:57:10 PDT
  • The Sonotube debate Wed, 17 May 95 14:57:14 PDT
  • Fiberglass tube update Tue, 16 May 95 9:04:33 PDT
  • O. D. of 2" eyepiece? Thu, 11 May 95 9:35:59 PDT
  • Re: Focusers(was: Crayford focuser) Mon, 8 May 95 21:50:10 PDT
  • Fiberglass tubes and altitude bearings Mon, 8 May 95 17:27:54 PDT
  • Fiberglass tubes Sun, 7 May 95 9:00:39 PDT
• dbell@cup.portal.com
  • Re: Sundials Fri, 19 May 95 13:15:27 PDT
• Dean Ketelsen
  • Re: Home made glass Tue, 9 May 1995 15:25:14 -0700
  • Re: Home made glass Tue, 9 May 1995 10:51:05 -0700
  • Re: Grinding elliptical flats Wed, 3 May 1995 10:23:26 -0700
  • Re: Eyepieces (was coma, ...) Tue, 2 May 1995 21:34:35 -0700
  • Ronchi Null Test Mon, 1 May 1995 11:12:42 -0700
• Don Loftus
  • Re: Home made glass 9 May 1995 15:19:48 U
  • Battery fix 5 May 1995 08:25:42 U
• Doug Ferrell
  • Ferrell's mirror: Rough grinding begins! Mon, 15 May 1995 16:27:47 PDT
  • Re: Dob FAQs Tue, 2 May 1995 15:15:31 PDT
• Dowd, Kevin
  • Re: !! ABOUT ATM DIGEST !! Thu, 11 May 95 08:49:00 PDT
• Eason, Dale
  • Re: Removing Aluminum coatings. Tue, 30 May 95 15:40:00 CDT
  • mirror figuring question Wed, 24 May 95 15:57:00 CDT
  • Eason's telescope 1st light. and Data reduction program Mon, 22 May 95 17:37:00 CDT
  • Tip for joining balsa wood sheets Mon, 08 May 95 13:50:00 CDT
  • Re: Texereau data reduction Fri, 05 May 95 13:39:00 CDT
  • Eason's Telescope, Gosh its better Mon, 01 May 95 17:04:00 CDT
  • Willmann-Bell says no to data reduction program upload Mon, 01 May 95 13:47:00 CDT
• Edwin Spector
  • Re: Curved Spiders Fri, 19 May 95 09:19:11 BST
  • Re: Curved Spiders Thu, 18 May 95 09:26:37 BST
  • Re: List eaten by Langeliers ! Wed, 17 May 95 16:38:03 BST
  • Re: Problems!! Wed, 17 May 95 15:25:31 BST
  • Spectacle Protection Tue, 9 May 95 13:18:48 BST
  • Re: batteries Fri, 5 May 1995 14:24:02 -0700
  • Re: batteries Fri, 5 May 95 16:11:17 BST
  • Re: Battery fix - Raising the Dead Fri, 5 May 95 15:36:30 BST
• Eric S. Johansson
  • Re: batteries Thu, 04 May 1995 20:49:54 -0400
• Francis J. O'Reilly
  • RTMC test set-up 20 May 95 19:48:15 EDT
  • Westchester Amateur Astronomers 03 May 95 21:49:33 EDT
  • 4.25" kits 01 May 95 23:34:46 EDT
• Frank Sienkiewicz
  • ccd video camera - suggestions? Mon, 15 May 1995 15:50:51 -0400
  • new or improved guidescope for C14? Wed, 10 May 1995 17:25:39 -0400
• Fred Quarnstrom
  • Re: Fiberglass tube update Tue, 16 May 1995 13:50:39 -0700 (PDT)
  • How to use ATM index Fri, 5 May 1995 11:24:18 -0700 (PDT)
• G. Pearson
  • Subject: Tubes, FOV, vignetting Sun, 21 May 1995 16:44:14 -0500
  • rubber gasket material Sat, 20 May 1995 18:57:13 -0500
  • non-slip surface? Thu, 18 May 1995 23:01:16 -0500
  • Re: building a sundial Thu, 18 May 1995 19:50:18 -0500
  • Re: Fiberglass tube update Wed, 17 May 1995 16:54:24 -0500
  • Re: atm-digest Wed, 10 May 1995 18:21:48 -0500
  • Re: Spectacle Protection Tue, 9 May 1995 17:49:35 -0500
  • Re: Fiberglass tubes Mon, 8 May 1995 08:37:15 -0500
  • batteries Wed, 3 May 1995 23:16:10 -0500
• Gary Coffman
  • Re: Lead Acid Storage Batteries Wed, 22 Jun 1994 06:09:35 GMT
  • Re: Lead Acid Storage Batteries Wed, 22 Jun 1994 06:09:35 GMT
• Geoff Dudley
  • Printing/plotting curved ronchi lines 26 May 95 13:12:46 EDT
  • altaz.zip.. where is it located? 3 May 95 11:21:56 EDT
• GRANT TUDOR
  • RCPT: altaz.zip.. where is it located? Wed, 3 May 1995 17:07:37 GMT+1000
• Greg Granville
  • polishing pads Thu, 25 May 1995 14:25:59 -0400 (EDT)
  • Re: Coma /Collimation Wed, 10 May 1995 13:44:13 -0400 (EDT)
• GregJ888@aol.com
  • Re: Fiberglass tubes Wed, 10 May 1995 02:36:17 -0400
  • Re: Fiberglass tubes Tue, 9 May 1995 02:15:11 -0400
  • Re: Autoguider reference Wed, 3 May 1995 02:39:34 -0400
• Henry T. Van Gemert
  • Re: Spectacle Protection Thu, 11 May 95 10:36 EDT
  • Re: your mail Sun, 7 May 95 21:22 EDT
  • Re: your mail Tue, 2 May 95 22:17 EDT
  • Re: Suggestions for a beginner wanted Tue, 2 May 95 22:00 EDT
• HOFFMAN@wmich.edu
  • Identifying glass Fri, 12 May 1995 22:50:12 -0400 (EDT)
  • Re: Spectacle Protection Wed, 10 May 1995 13:09:24 -0400 (EDT)
  • Re: Home made glass Wed, 10 May 1995 13:02:49 -0400 (EDT)
  • Re: Home made glass Wed, 10 May 1995 12:35:29 -0400 (EDT)
  • Re: batteries (fwd) Mon, 08 May 1995 18:01:49 -0400 (EDT)
  • Re: Grinding elliptical flats Thu, 04 May 1995 16:36:10 -0400 (EDT)
  • Re: coma, coma, coma Tue, 02 May 1995 13:03:10 -0400 (EDT)
  • Re: Telscope Making Magazine Tue, 02 May 1995 12:44:30 -0400 (EDT)
• I AM NOT AN ANIMAL
  • Re: What I'd like to see Mon, 1 May 1995 12:54:47 -0600
• Jaakko T Oksa
  • Re: atm V1 #127 Mon, 29 May 1995 21:33:59 +0300 (EET DST)
  • Re: difference between various catadioptric designs Wed, 24 May 1995 11:56:31 +0300 (EET DST)
  • Re: Aperture Mask Tue, 9 May 1995 15:35:22 +0300 (EET DST)
  • Focusers(was: Crayford focuser) Mon, 8 May 1995 20:34:31 +0300 (EET DST)
• Jan R. Sugalski
  • Re: Grinding elliptical flats Thu, 4 May 1995 08:30:21 -0400 (EDT)
  • Re: Grinding a flat Tue, 2 May 1995 01:17:09 -0400 (EDT)
  • Re: Grinding a flat Tue, 2 May 1995 01:09:02 -0400 (EDT)
  • Re: Star Test Question Tue, 2 May 1995 01:01:22 -0400 (EDT)
  • Re: Star Test Question Mon, 1 May 1995 20:17:54 -0400 (EDT)
  • Re: Star Test Question Mon, 1 May 1995 08:33:40 -0400 (EDT)
• Janice Anthes [Sun New Mexico SE]
  • PROMO: COMPETITIVE UPGRADE TO SPARCprinter E Tue, 2 May 1995 14:54:54 -0600
• jfh@rguxa.att.com
  • Re: your mail 3 May 95 09:29:00 -0400
  • Re: What I'd like to see 1 May 95 15:46:00 -0400
  • Re: Star Test Question 1 May 95 11:11:00 -0400
• Jonathan Newell
  • Re: Tell Pyrex from Silica Thu, 11 May 1995 11:41:33 -0400 (EDT)
• Jorge Saravia Rios
  • Re: difference between various catadioptric designs Tue, 23 May 1995 14:58:52 -0400
  • An article about Field Rotation Tue, 02 May 1995 15:04:36 -0400
• Ken Florentino
  • Re: batteries,charging Fri, 5 May 1995 00:01:39 -0600 (MDT)
• Ken Kociolek
  • Pitch Mat Fri, 12 May 95 06:27:11 CDT
• Kerwin Robert
  • Removing aluminum coatings? Thu, 25 May 95 08:37:00 MST
• Kevin Dowd
  • Re: The Sonotube debate Thu, 18 May 1995 06:49:43 -0701
  • Re: building a sundial Thu, 18 May 1995 06:36:29 -0700
  • Re: Fiberglass tubes Thu, 11 May 1995 11:23:29 -0700
  • Re: Fiberglass Tubes Tue, 9 May 1995 12:30:17 -0700
  • Re: Kilian's Mount: Bearing spacing. Less or More? Fri, 5 May 1995 11:43:35 -0700
• L W Phillips
  • GEM Shaft Size 8 May 95 13:08:57 -0400
  • Fiberglass tubes 7 May 95 22:37:03 -0400
  • Re: Texereau data reduction 4 May 95 17:11:18 -0400
• Larry Russell
  • Hockey Puck Dobs feet Sun, 7 May 1995 22:28:20 -0400
  • Re: batteries Thu, 4 May 1995 14:03:02 -0400
  • Re: batteries Thu, 4 May 1995 14:03:02 -0400
• Lou Sanchez-Chopitea
  • atm V1 #127 Tue, 30 May 1995 09:08:08 -0700
  • RE: Home made glass Thu, 11 May 1995 11:57:30 -0700
  • RE: Home made glass Thu, 11 May 1995 11:54:17 -0700
  • RE: Home made glass Wed, 10 May 1995 15:39:10 -0700
• M. N. Lovellette
  • Re: Home made glass Tue, 9 May 1995 10:34:39 -0700
  • Re: Split-Ring Equi/Uploading CADs Thu, 4 May 1995 15:44:33 -0400
• Mark A. Wicks
  • Grinding elliptical flats Tue, 2 May 1995 16:57:58 -0400
  • Parametric Optics/Secondary Suppliers Mon, 1 May 1995 17:09:25 -0400
• Mark Suchting
  • Re: flat strategy Tue, 9 May 1995 15:43:50 +1200 (EST)
  • Re: Dobsonian binoculars Tue, 2 May 1995 13:41:47 +1200 (EST)
  • Flat testing by Ritchey Test Tue, 2 May 1995 13:32:15 +1200 (EST)
  • Re: Star Test Question Tue, 2 May 1995 10:57:42 +1200 (EST)
• Mark VandeWettering
  • See y'all at RTMC Tue, 23 May 1995 07:44:44 -0700
  • Re: Tubes, FOV, vignetting Sat, 20 May 1995 20:02:52 -0700
  • Re: Fiberglass tube update Tue, 16 May 1995 10:14:54 -0700
  • Re: Figuring advice needed Fri, 12 May 1995 10:37:38 -0700
  • Re: Follow-up on the eyes Thu, 11 May 1995 17:12:25 -0700
  • Re: Lens support ? Wed, 10 May 1995 15:54:57 -0700
  • Re: Home made glass Tue, 9 May 1995 11:50:59 -0700
  • Melting Glass Tue, 9 May 1995 10:13:39 -0700
  • Re: Texereau data reduction Fri, 5 May 1995 12:13:01 -0700
  • Re: Steve Scampinis Dob Article archived Thu, 4 May 1995 12:20:35 -0700
  • Re: Star Test Question Tue, 2 May 1995 11:28:34 -0700
  • Re: Ronchi Null Test Tue, 2 May 1995 11:16:42 -0700
  • Re: Grinding a flat Tue, 2 May 1995 11:09:20 -0700
  • Re: Ronchi Test Mon, 1 May 1995 21:16:37 -0700
  • Re: Photographic scope choices? Mon, 1 May 1995 13:23:22 -0700
  • Re: coma, coma, coma Mon, 1 May 1995 12:51:51 -0700
  • Re: coma, coma, coma Mon, 1 May 1995 10:58:52 -0700
  • Re: Star Test Question Mon, 1 May 1995 08:01:07 -0700
• Marketing
  • re: Surplus Optics: Mass/NH Area? Tue, 9 May 95 10:41:13 PDT
• Mel Bartels
  • 30" cell design Wed, 31 May 95 11:21:04 PDT
  • Re: atm V1 #123 Sun, 21 May 95 11:04:28 PDT
  • Re: atm V1 #121 Thu, 18 May 95 17:40:39 PDT
  • focuser squaring on Thu, 11 May 95 08:51:36 PDT
  • collimation Wed, 10 May 95 16:57:12 PDT
  • tipped focuser collimation Tue, 9 May 95 16:34:10 PDT
  • Re: Coma /Collimation Tue, 9 May 95 16:08:36 PDT
  • Re: Coma /Collimation Tue, 9 May 95 08:31:55 PDT
  • Re: Home made glass Mon, 8 May 95 22:11:54 PDT
  • Re: Kilian's Mount: Bearing spacing. Less or More? Mon, 8 May 95 11:03:50 PDT
  • Re: Aperture Mask Mon, 8 May 95 11:03:32 PDT
  • Re: Aperture Mask Mon, 8 May 95 11:03:32 PDT
  • re:RTMC power Mon, 8 May 95 11:03:19 PDT
  • Re: Crayford focuser Sun, 7 May 95 17:28:18 PDT
  • Re: One more beginner question Sat, 6 May 95 22:06:05 PDT
  • Re: Kilian's Mount: Bearing spacing. Less or More? Fri, 5 May 95 16:02:17 PDT
  • Re: Kilian's Mount: Bearing spacing. Less or More? Fri, 5 May 95 15:58:03 PDT
  • RTMC Thu, 4 May 95 16:35:11 PDT
  • Re: Split-Ring Equi/Uploading CADs Thu, 4 May 95 10:04:51 PDT
  • Re: batteries Wed, 3 May 95 23:30:28 PDT
  • Re: no subject (file transmission) Wed, 3 May 95 12:34:17 PDT
  • Re: no subject (file transmission) Wed, 3 May 95 12:34:17 PDT
  • Re: Kilian's Mount: Bearing spacing. Less or More? Wed, 3 May 95 12:28:21 PDT
  • Re: An article about Field R Tue, 2 May 95 23:37:30 PDT
  • Re: Autoguider reference Mon, 1 May 95 09:47:46 PDT
  • Re: Crayford construction Mon, 1 May 95 09:47:32 PDT
  • Re: Star Test Question Mon, 1 May 95 09:47:22 PDT
• mgw@resource-intl.com
  • Re: atm V1 #127 Mon, 29 May 1995 11:29:16 -0700 (PDT)
  • Re: The Sonotube debate Wed, 17 May 1995 17:39:33 -0700 (PDT)
  • Re: Spectacle Protection Tue, 9 May 1995 19:28:12 -0700 (PDT)
• Michael Cain 937-4612
  • Curved spiders Mon, 15 May 1995 21:11:00 -0600 (CST)
• Michael Pendley
  • Re: The Sonotube debate Thu, 18 May 1995 11:24:00 -0600
  • RE: Home made glass Wed, 10 May 1995 20:14:27 -0700
  • Home made glass Mon, 8 May 1995 19:16:26 -0600
• Mike Abercrombie
  • atm V1 #128 Wed, 31 May 1995 09:09:06 -0500
  • atm V1 #128 Wed, 31 May 1995 09:09:05 -0500
  • atm V1 #122 Tue, 30 May 1995 12:49:12 -0500
  • 7` LONG TUBE FOR 8"������ Tue, 9 May 1995 07:16:25 -0500
  • Re: One more beginner question Sat, 6 May 1995 23:15:23 -0500 (CDT)
  • 7` LONG TUBE FOR 8" MIRRO Sat, 6 May 1995 00:00:45 -0500
  • STEVE SCAMPINIS DOB������ Thu, 4 May 1995 22:33:16 -0500
  • TSP Wed, 3 May 1995 18:27:32 -0500
  • NO SUBJECT (FILE TRANSMIS Wed, 3 May 1995 18:27:31 -0500
  • SITE LOCATION INFORMATION Tue, 2 May 1995 18:46:40 -0500
  • CERAMIC TOOLS Tue, 2 May 1995 18:46:37 -0500
• Mike Crawford
  • Re: Fiberglass tube update 16 May 1995 15:05:34 -0800
  • Re: Ferrell's mirror- Rough 15 May 1995 18:19:20 -0800
  • Re: Melting Glass 9 May 1995 13:25:41 -0800
  • Re: Texereau data reduction 5 May 1995 16:13:05 -0800
  • Re: An article about Field R 2 May 1995 17:10:53 -0800
  • Null Ronchi Screen? 1 May 1995 21:37:35 -0800
  • Re: Grinding a flat 1 May 1995 21:08:44 -0800
  • Re: coma, coma, coma 1 May 1995 15:48:34 -0800
• Mike Deliman
  • Telescope optics Fri, 12 May 1995 11:01:25 -0700 (PDT)
  • Re: fire temps and water Thu, 11 May 1995 09:27:43 -0700 (PDT)
  • Re: optical center vs. geom center Wed, 10 May 1995 09:31:08 -0700 (PDT)
• Mike Rodriguez
  • Re: atm V1 #127 Mon, 29 May 95 13:20:25 EDT
  • Re: Home made glass Wed, 10 May 95 23:17:30 EDT
  • Re: Polar Alignment 'Scope Mon, 08 May 95 22:56:30 EDT
  • Re: Fiberglass tubes Sun, 07 May 95 17:16:46 EDT
  • Re: batteries,charging Sat, 06 May 95 03:36:01 EDT
  • Re: batteries Thu, 04 May 95 16:12:04 EDT
• Mike Skorija
  • mentor Wed, 17 May 1995 10:51:21 -0400 (EDT)
  • Tools Thu, 4 May 1995 10:07:25 -0400 (EDT)
• Mitch Berkson
  • ATMs near Providence, RI? Mon, 29 May 1995 15:28:55 +0059 (EDT)
  • Re; blank and tool stuck together Sat, 27 May 1995 13:43:19 +0059 (EDT)
  • Slitless Foucault tester shadow interpretation Tue, 9 May 1995 09:45:05 +0059 (EDT)
  • Re: Crayford focuser Mon, 8 May 1995 11:03:25 +0059 (EDT)
  • Crayford focuser Sun, 7 May 1995 17:45:02 +0059 (EDT)
  • Crayford construction Mon, 1 May 1995 10:06:14 +0059 (EDT)
• MMARULLA@mailgw.sanders.lockheed.com
  • Re: non-slip surface? Fri, 19 May 1995 12:32:50 -0400
  • Re: Curved Spiders Wed, 17 May 1995 14:38:44 -0400
  • Re: 7` LONG TUBE FOR 8" MIRRO Sun, 7 May 1995 13:42:18 -0400
  • Split-Ring rollers Sat, 6 May 1995 01:10:16 -0400
  • Re: 4.25" kits Tue, 2 May 1995 13:24:08 -0400
• Morton Losher
  • Sidereal Clock source Tue, 23 May 1995 10:56:35 +0500
  • Re: Polar Alignment 'Scope Tue, 9 May 1995 12:10:08 +0500
  • Re: Polar Alignment 'Scope Mon, 8 May 1995 11:11:24 +0500
• MRGALAXY@UCRPH0.UCR.EDU
  • re:RTMC Tue, 23 May 1995 19:48:42 -0700 (PDT)
  • re:RTMC test set-up Mon, 22 May 1995 19:26:38 -0700 (PDT)
  • re:RTMC power Tue, 9 May 1995 16:19:21 -0700 (PDT)
  • re:RTMC power Sun, 7 May 1995 21:37:14 -0700 (PDT)
  • re: RTMC starting times Wed, 3 May 1995 20:22:36 -0700 (PDT)
• Paul A Human
  • Re: Suggestions for grind table wanted Thu, 25 May 1995 15:45:20 SAST-2
• Paul Mullin
  • Re: batteries Thu, 4 May 1995 06:59:39 -0700
  • Re: Split-Ring Equi/Uploading CADs Thu, 4 May 1995 06:47:22 -0700
• Paul Pomes
  • Re: Photographic scope choices? Tue, 02 May 1995 08:35:07 -0500
  • Photographic scope choices? Mon, 01 May 1995 13:24:36 -0500
• Paula Tomlinson
  • Re: more on ATM books Mon, 8 May 95 16:59:35 TZ
• PFAFF2@delphi.com
  • Pitch Mat Fri, 12 May 1995 22:59:30 -0400 (EDT)
  • O. D. of 2" eyepiece? Fri, 12 May 1995 01:28:41 -0400 (EDT)
  • collimation Wed, 10 May 1995 23:08:28 -0400 (EDT)
  • Coma/Collimation Wed, 10 May 1995 00:19:46 -0400 (EDT)
  • Re: Coma /Collimation Mon, 08 May 1995 23:36:43 -0400 (EDT)
  • Grinding elliptical flats Tue, 02 May 1995 23:34:26 -0400 (EDT)
  • Re: What I'd like to see Tue, 02 May 1995 01:26:28 -0400 (EDT)
  • Photographic scope choices? Tue, 02 May 1995 01:26:11 -0400 (EDT)
• Randy Johnson
  • Re: Split-Ring Equi/Uploading Fri, 5 May 1995 07:27:20 -0700
  • Re: Suggestions for a beginner wanted Mon, 1 May 1995 23:35:02 -0700
• Richard Combs
  • Re: focuser wobble 31 May 1995 08:50:15 -0800
  • Re: RTMC test set-up 22 May 1995 09:31:39 -0800
  • Fused Silica or Pyrex 11 May 1995 09:45:28 -0800
  • Re: optical center vs. geom 10 May 1995 16:58:34 -0800
  • Squaring on the focuser 9 May 1995 10:11:37 -0800
  • Re: Coma /Collimation 8 May 1995 09:06:11 -0800
  • Re: Coma /Collimation 5 May 1995 16:29:26 -0800
  • Re: RTMC schedule 3 May 1995 13:16:13 -0800
  • Re: Star Test Question 1 May 1995 10:57:47 -0800
  • Re: Suggestions for a beginn 1 May 1995 10:40:00 -0800
• Richard Schiek
  • difference between various catadioptric designs Mon, 22 May 1995 13:05:19 -0700
  • RE: Fiberglass tube update Tue, 16 May 1995 20:15:32 -0700
  • Dobsonian binoculars Mon, 1 May 1995 14:06:12 -0700
  • Re: coma, coma, coma Mon, 1 May 1995 11:20:08 -0700
  • Re: Crayford construction Mon, 1 May 1995 10:22:26 -0700
  • Re: Crayford construction Mon, 1 May 1995 10:22:26 -0700
  • coma, coma, coma Mon, 1 May 1995 09:12:00 -0700
  • coma, coma, coma Mon, 1 May 1995 09:12:00 -0700
• Richard Wagner
  • Re: Fiberglass Tubes Tue, 9 May 1995 08:30:43 -0400
• Richard.L.Klappal@att.com
  • Re: Suggestions for grind table wanted Wed, 24 May 95 10:45:30 CDT
  • Re: Fiberglass tube update Tue, 16 May 95 12:21:32 CDT
  • Re: Focusers(was: Crayford focuser) Mon, 8 May 95 17:27:55 CDT
  • Re: Polar Alignment 'Scope Mon, 8 May 95 12:54:50 CDT
  • Re: Kilian's Mount: Bearing spacing. Less or More? Mon, 8 May 95 09:01:54 CDT
  • Re: batteries Fri, 5 May 95 09:21:19 CDT
  • Re: Split-Ring Equi/Uploading CADs Thu, 4 May 95 11:18:21 CDT
  • Re: What I'd like to see Mon, 1 May 95 14:44:50 CDT
• Rik Hill
  • Re: polishing pads Thu, 25 May 1995 15:45:56 +0700
  • Re: Suggestions for grind table wanted Wed, 24 May 1995 08:43:05 +0700
  • Re: building a sundial Thu, 18 May 1995 20:43:41 +0700
  • Re: Fiberglass tube update Wed, 17 May 95 21:38:48 MST
  • Re: Curved spiders Tue, 16 May 1995 11:46:07 +0700
  • Re: ccd video camera - suggestions? Tue, 16 May 1995 11:40:14 +0700
  • Re: Pitch Mat Fri, 12 May 1995 11:17:51 +0700
  • Re: small shed observatory Thu, 11 May 1995 09:03:49 +0700
  • Re: Home made glass Tue, 9 May 95 16:18:35 MST
  • Re: Home made glass Tue, 9 May 1995 08:57:11 +0700
  • Re: more on ATM books Tue, 9 May 1995 08:49:58 +0700
  • Re: more on ATM books Mon, 8 May 1995 09:08:06 +0700
  • Re: How to use ATM index Fri, 5 May 1995 13:11:21 +0700
  • more on ATM books Fri, 5 May 1995 10:01:27 +0700
  • Re: Photographic scope choices? Tue, 2 May 1995 08:46:46 +0700
  • Re: Grinding a flat Tue, 2 May 1995 08:40:53 +0700
  • tile tools Mon, 1 May 1995 11:14:42 +0700
  • Re:tool substitutes Mon, 1 May 1995 10:51:53 +0700
  • Fi mirrors Mon, 1 May 1995 10:43:58 +0700
  • Re: What I'd like to see Mon, 1 May 1995 10:32:01 +0700
  • Re: eyepiece projection Mon, 1 May 1995 10:28:26 +0700
  • Telescope Making = Book?? Mon, 1 May 1995 10:02:11 +0700
  • Re: Kilian's Mount: Design changes. Mon, 1 May 1995 09:10:21 +0700
• Rivera-Gronager, Georgia
  • HEADS UP on FY96 Internal Spend Plan Call Letter Fri, 05 May 95 16:58:34 mst
• Rob O'Toole
  • Surplus Optics: Mass/NH Area? Tue, 9 May 95 9:14:25 EDT
  • TM Magazine Issues at Kalmbach Mon, 1 May 95 12:40:23 EDT
• Robert Beer
  • Re: Crayford construction Mon, 1 May 1995 11:43:59 -0500
• Robert Fields
  • Re: atm V1 #127 Mon, 29 May 1995 22:14:11 -0700 (PDT)
  • Going to the RTMC Thu, 25 May 1995 06:56:06 -0700 (PDT)
  • RTMC attendee list Wed, 17 May 1995 17:51:50 -0700 (PDT)
  • List eaten by Langeliers ! Wed, 17 May 1995 07:35:42 -0700 (PDT)
  • How to reply to the atm-digest Wed, 17 May 1995 07:11:35 -0700 (PDT)
  • Re: List Table of Contents Wed, 17 May 1995 07:08:42 -0700 (PDT)
  • List had probelms & Digest #115 Tue, 16 May 1995 16:14:45 -0701 (PDT)
  • List had probelms & Digest #115 Tue, 16 May 1995 16:14:45 -0701 (PDT)
  • Re: !! ABOUT ATM DIGEST !! Thu, 11 May 1995 12:14:16 -0700 (PDT)
  • !! ABOUT ATM DIGEST !! Wed, 10 May 1995 23:07:44 -0701 (PDT)
  • **** !! READ ME !! **** Tue, 9 May 1995 17:07:40 -0700 (PDT)
  • Re: Spectacle Protection Tue, 9 May 1995 07:11:16 -0700 (PDT)
  • Re: Texereau data reduction Fri, 5 May 1995 13:30:24 -0700 (PDT)
  • Steve Scampinis Dob Article archived Wed, 3 May 1995 23:30:03 -0700 (PDT)
  • Re: Eyepieces thread Wed, 3 May 1995 15:48:54 -0700 (PDT)
  • Re: altaz.zip.. where is it located? Tue, 2 May 1995 21:00:38 -0700 (PDT)
  • Re: Dob FAQs Tue, 2 May 1995 16:29:50 -0700 (PDT)
  • ATTN: RTMC Attendees Tue, 2 May 1995 16:28:33 -0700 (PDT)
  • Re: Bobbing for jokes. Tue, 2 May 1995 09:55:42 -0700 (PDT)
• Robert Geer
  • Re: !! ABOUT ATM DIGEST !! Thu, 11 May 95 09:06:53 PDT
• Ross Overbury
  • Lens support ? and wide-angle failure tale Tue, 9 May 95 23:10:02 EDT
• Russell D Lederman
  • FRP on bearings Thu, 11 May 1995 13:29:43 -0400
  • Re: Coma /Collimation Sun, 7 May 1995 12:55:05 -0400
  • Re: Coma /Collimation Sun, 7 May 1995 12:54:34 -0400
  • Re: Coma /Collimation Sat, 6 May 1995 02:06:27 -0400
  • Coma /Collimation Fri, 5 May 1995 13:55:00 -0400
• Sam Paris
  • Re: Home made glass Tue, 9 May 1995 20:16:00 -0500 (CDT)
• Schrock
  • Re: Autoguider reference Tue, 2 May 95 12:14:37 EDT
• SCN User
  • Re: f/9.65 Newtonian Wed, 31 May 1995 20:32:59 -0700
  • Sundial Project, the patterns Sun, 21 May 1995 07:04:08 -0700
  • Sundial Project, the analemma Fri, 19 May 1995 17:06:16 -0700
  • Re: building a sundial Wed, 17 May 1995 22:35:12 -0700
  • Re: Slitless Foucault tester shadow interpretation Tue, 9 May 1995 16:24:32 -0700
  • Re: flat strategy Mon, 8 May 1995 17:56:13 -0700
  • Re: Eyepieces thread Thu, 4 May 1995 21:04:23 -0700
  • Re: Grinding a flat Mon, 1 May 1995 17:30:58 -0700
  • Re: Suggestions for a beginner wanted Sun, 30 Apr 1995 22:09:22 -0700
• Stan Thomas
  • Re: Removing aluminum coatings? Fri, 26 May 1995 08:19:51 -0600
• Stephen Dillinger
  • Re: The Sonotube debate Thu, 18 May 95 08:48:34 MDT
  • Re: In need of help on split-ring Fri, 5 May 95 17:10:06 MDT
  • Re: In need of advice on split-ring mount Thu, 4 May 95 09:30:37 MDT
• Stephen Spangler
  • Re: Spectacle Protection Wed, 10 May 1995 20:51:29 00000
  • Re: batteries (fwd) Wed, 10 May 1995 13:09:25 00000
  • Re: clarification on split-ring mnt. post Fri, 5 May 1995 11:32:19 00000
  • Re: batteries Fri, 5 May 1995 11:08:17 00000
• Steve Scampini
  • Dob Brakes Wed, 31 May 95 14:56:16 EDT
  • Another Laser Idea Thu, 11 May 95 12:09:36 EDT
  • Focuser Alignment/Lasers Tue, 9 May 95 9:38:59 EDT
  • Aperture Mask Mon, 8 May 95 9:16:43 EDT
  • Thanks Thu, 4 May 95 13:17:07 EDT
  • no subject (file transmission) Wed, 3 May 95 12:13:18 EDT
  • no subject (file transmission) Wed, 3 May 95 12:13:18 EDT
  • Dob FAQs Tue, 2 May 95 13:32:50 EDT
• Steve Strickland
  • Re: polishing pads Fri, 26 May 1995 02:39:16 -0500
  • Re: more on ATM books Sun, 7 May 1995 13:13:03 -0500
  • Re: Ronchi Null Test Tue, 2 May 1995 03:07:41 -0500
  • Re: What I'd like to see Tue, 2 May 1995 03:03:58 -0500
  • Re: coma, coma, coma Tue, 2 May 1995 03:01:02 -0500
• t.hager1@genie.geis.com
  • Re: Kilian's Mount: Bearing sp Sun, 7 May 95 13:12:00 UTC
  • Re: Split-Ring Equi/Uploading Fri, 5 May 95 10:54:00 UTC
• Thomas Clarke
  • Tell Pyrex from Silica Thu, 11 May 95 09:00 EDT
  • Re: Fiberglass tubes Mon, 8 May 95 07:14 EDT
• To Know Is Not Enough 05-May-1995 2023 -0400
  • Re: batteries Fri, 5 May 95 20:37:09 EDT
• Tom Glinos, x4302
  • Re: Eyepieces (was coma, ...) Thu, 4 May 1995 10:10:53 -0400 (EDT)
• Tom Hayko
  • Suggestions for grind table wanted Tue, 23 May 95 23:02:16
  • One more beginner question Sat, 6 May 95 22:51:16
  • Re: your mail Wed, 3 May 95 21:53:09
  • Re: your mail Wed, 3 May 95 07:32:27
  • Re: Suggestions for a beginner wanted Wed, 3 May 95 07:28:52
  • Re: your mail Mon, 1 May 95 21:32:58
  • Re: Suggestions for a beginn Mon, 1 May 95 21:28:49
  • Re: Suggestions for a beginner wanted Mon, 1 May 95 21:23:28
• Tony Cecce, Corning, NY
  • Figuring advice needed Fri, 12 May 1995 10:10:31 -0500 (EST)
  • Re: Tell Pyrex from Silica Fri, 12 May 1995 10:00:17 -0500 (EST)
  • Re: Home made glass Wed, 10 May 1995 16:19:17 -0500 (EST)
  • Re: Texereau data reduction Fri, 05 May 1995 15:43:27 -0500 (EST)
  • Re: Ronchi Test Mon, 01 May 1995 21:07:08 -0500 (EST)
  • Ronchi Test Mon, 01 May 1995 11:15:49 -0500 (EST)
• Tybee Evans
  • Re: small shed observatory Fri, 12 May 1995 12:46:17 -0700
• Warrant, Marilyn
  • Browsers for the Internal Web Fri, 05 May 95 17:11:27 mst
• William Rueger
  • Laser Collimation Mon, 22 May 1995 19:47:33 -0400

Last message date: Thu 01 Jun 1995 - 09:08:43 PDT
Archived on: Fri Sep 01 1995 - 13:49:46 PDT

• Messages sorted by: [ date ][ thread ][ subject ]