Amateur Telescope Makers (ATM) Archive for MAY08 - by thread

• Author Index

• [ATM] 8 inch mirror, Adam Krause
• [ATM] Adjusting FL During Fine Grinding, Bill Wheaton
  • Re: [ATM] Adjusting FL During Fine Grinding, fundo
  • Re: [ATM] Adjusting FL During Fine Grinding, Bob May
• [ATM] Another Math Question, Richard F.L.R. Snashall
  • Re: [ATM] Another Math Question, Jim Burrows
  • Re: [ATM] Another Math Question, Carlos Davila
  • Re: [ATM] Another Math Question, Richard F.L.R. Snashall
• [ATM] Astigmatism, libor nemec
  • Re: [ATM] Astigmatism, David Harbour
  • Re: [ATM] Astigmatism, Bob May
    • Re: [ATM] Astigmatism, David Harbour
      • Re: [ATM] Astigmatism, Francis J. O'Reilly
      • Re: [ATM] Astigmatism, David Harbour
      • Re: [ATM] Astigmatism, Matt Considine
      • Re: [ATM] Astigmatism, David Harbour
      • Re: [ATM] Astigmatism, waldo kitty
      • Re: [ATM] Astigmatism, George Blahun Jr
      • Re: [ATM] Astigmatism, Bob May
      • Re: [ATM] Astigmatism, David Harbour
    • Re: [ATM] Astigmatism, Guy Brandenburg
    • Re: [ATM] Astigmatism, Mitchell R
  • <Possible follow-ups>
  • Re: [ATM] Astigmatism, Roman Toledo
• Re: [ATM] Astigmatism on thin blanks, Neil Booker
  • <Possible follow-ups>
  • Re: [ATM] Astigmatism on thin blanks, Nils Olof Carlin
  • Re: [ATM] Astigmatism on thin blanks, Joe Mirando
    • Re: [ATM] Astigmatism on thin blanks, Ted Cohen
    • Re: [ATM] Astigmatism on thin blanks, David Harbour
  • [ATM] Astigmatism on thin blanks, Russell Jocoy
    • Re: [ATM] Astigmatism on thin blanks, Peter
      • Re: [ATM] Astigmatism on thin blanks, Mike Lockwood
      • Re: [ATM] Astigmatism on thin blanks, Mark Cowan
      • Re: [ATM] Astigmatism on thin blanks, bbastro1
      • Re: [ATM] Astigmatism on thin blanks, David Harbour
      • Re: [ATM] Astigmatism on thin blanks, Peter
    • Re: [ATM] Astigmatism on thin blanks, David Harbour
  • Re: [ATM] Astigmatism on thin blanks, Matt Considine
    • Re: [ATM] Astigmatism on thin blanks, David Harbour
  • Re: [ATM] Astigmatism on thin blanks, astroguy@nas.com
  • Re: [ATM] Astigmatism on thin blanks, Starmutt
    • Re: [ATM] Astigmatism on thin blanks, David Harbour
• [ATM] ATM: 7 autographed, personalized, free copies of book, Roman Toledo
• [ATM] ATM: 7 autographed, personalized, free copies of book-, David Harbour
  • <Possible follow-ups>
  • Re: [ATM] ATM: 7 autographed, personalized, free copies of book-, Joe Mirando
• Re: [ATM] ATM Digest, Vol 53, Issue 21, Arjan te Marvelde \(hetnet\)
• Re: [ATM] ATM Digest, Vol 53, Issue 33, chris forder
• Re: [ATM] ATM Digest, Vol 53, Issue 7, Mitchell R
  • Re: [ATM] ATM Digest, Vol 53, Issue 7, Mark Holm
    • Re: [ATM] ATM Digest, Vol 53, Issue 7, Richard F.L.R. Snashall
• [ATM] ATM: Errata as an attachment-, David Harbour
• [ATM] ATM: Error, David Harbour
• [ATM] ATM: Late but accomplished-, David Harbour
• [ATM] ATM: Lost, but now recovered beautiful photo-, David Harbour
  • Re: [ATM] ATM: Lost, but now recovered beautiful photo-, Balaji Ramani
• Re: [ATM] ATM: Old memory, atm stuff, beautiful old car-, Bob May
  • Re: [ATM] ATM: Old memory, atm stuff, beautiful old car-, David Harbour
• [ATM] ATM: Please answer simple question, each and every one, Roman Toledo
• Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, Nils Olof Carlin
  • Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, David Harbour
    • Re: [ATM] ATM: Please answer simple question - Inverted visual fields, Mark Cowan
      • Re: [ATM] ATM: Please answer simple question - Inverted visualfields, David Harbour
  • Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, waldo kitty
    • Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, Mark Cowan
      • Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, waldo kitty
    • Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, David Harbour
      • Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, waldo kitty
      • Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, David Harbour
  • <Possible follow-ups>
  • Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, Nils Olof Carlin
    • Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, David Harbour
    • Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, Mark Cowan
• [ATM] ATM: Please answer simple question, each and every one of you, please-, David Harbour
  • Re: [ATM] ATM: Please answer simple question, each and every one of you, please-, Thomas Janstrom
• [ATM] ATM: Slit equipped and slitless testers-, David Harbour
  • Re: [ATM] ATM: Slit equipped and slitless testers-, Mark Cowan
    • Re: [ATM] ATM: Slit equipped and slitless testers-, David Harbour
      • Re: [ATM] ATM: Slit equipped and slitless testers-, Jerry
      • Re: [ATM] ATM: Slit equipped and slitless testers-, David Harbour
    • Re: [ATM] ATM: Slit equipped and slitless testers-, bbastro1
      • Re: [ATM] ATM: Slit equipped and slitless testers-, David Harbour
• [ATM] ATM: Stoney Ridge Observatory, David Harbour
• [ATM] ATM: "Whether or not....", David Harbour
• [ATM] bending brass, Gil McFarlane
  • Re: [ATM] bending brass, Richard
    • [ATM] Telescope could focus light without a mirror or lens, mbartels
      • Re: [ATM] Telescope could focus light without a mirror or lens, Bob May
      • Re: [ATM] Telescope could focus light without a mirror or lens, Richard F.L.R. Snashall
      • Re: [ATM] Telescope could focus light without a mirror or lens, Mel Bartels
      • Re: [ATM] Telescope could focus light without a mirror or lens, David Harbour
      • Re: [ATM] Telescope could focus light without a mirror or lens, Mel Bartels
      • Re: [ATM] Telescope could focus light without a mirror or lens, Bob May
    • Re: [ATM] bending brass, Gil McFarlane
    • Re: [ATM] bending brass, Bob May
      • Re: [ATM] bending brass, Mitch_Bisnauth
  • <Possible follow-ups>
  • Re: [ATM] bending brass, Jarvis Krumbein
• Re: [ATM] Betr.: 48" Dob at OMI, Everett Cairns
  • <Possible follow-ups>
  • Re: [ATM] Betr.: 48" Dob at OMI, Alexis Cousein
• [ATM] Buehler EcoMet #5, 2 speed grinder polisher, Carlos Davila
  • Re: [ATM] Buehler EcoMet #5, 2 speed grinder polisher, William Marriott
  • Re: [ATM] Buehler EcoMet #5, 2 speed grinder polisher, Bob May
    • Re: [ATM] Buehler EcoMet #5, 2 speed grinder polisher, William Marriott
  • Re: [ATM] Buehler EcoMet #5, 2 speed grinder polisher, Carlos Davila
  • <Possible follow-ups>
  • Re: [ATM] Buehler EcoMet #5, 2 speed grinder polisher, Neil Booker
• [ATM] Cell triangles and rtv, pauldkline
  • Re: [ATM] Cell triangles and rtv, kreig
    • Re: [ATM] Cell triangles and rtv, waldo kitty
      • Re: [ATM] Cell triangles and rtv, David Harbour
      • Re: [ATM] Cell triangles and rtv, Ken Hunter
      • Re: [ATM] Cell triangles and rtv, waldo kitty
    • Re: [ATM] Cell triangles and rtv, Alexis Cousein
  • Re: [ATM] Cell triangles and rtv, Bob May
  • Re: [ATM] Cell triangles and rtv, Alexis Cousein
• [ATM] coherence length, Carlos Davila
  • Re: [ATM] coherence length, Bob May
• [ATM] Dall Kirkham primary, lance clarke
  • Re: [ATM] Dall Kirkham primary, lance clarke
  • Re: [ATM] Dall Kirkham primary, Mike Lockwood
  • Re: [ATM] Dall Kirkham primary, Thomas Janstrom
• [ATM] Dave's new book, George Blahun Jr
  • Re: [ATM] Dave's new book, Mel Bartels
    • Re: [ATM] Dave's new book, David Harbour
  • Re: [ATM] Dave's new book, David Harbour
• Re: [ATM] Dealing with scratches, Virgil.Johnson
  • Re: [ATM] Dealing with scratches, Ted Cohen
  • Re: [ATM] Dealing with scratches, Jerry
• [ATM] Drive motors, Douglas Arion
  • <Possible follow-ups>
  • Re: [ATM] Drive Motors, G Gagne
• [ATM] Erratae ..., Matt Considine
• [ATM] Eyepiece terminology, Francis J. O'Reilly
  • Re: [ATM] Eyepiece terminology, Jerry
  • Re: [ATM] Eyepiece terminology, Mel Bartels
  • Re: [ATM] Eyepiece terminology, Dominic-Luc Webb
  • Re: [ATM] Eyepiece terminology, vladimir sacek
  • Re: [ATM] Eyepiece terminology, David Harbour
  • Re: [ATM] Eyepiece terminology, Scott Ewart
    • Re: [ATM] Eyepiece terminology, fundo
      • Re: [ATM] Eyepiece terminology, Stephen Koehler
• [ATM] FigureXP, Mitchell R
  • <Possible follow-ups>
  • Re: [ATM] FigureXP, Nils Olof Carlin
    • Re: [ATM] FigureXP, Mitchell R
      • Re: [ATM] FigureXP, Bob May
      • Re: [ATM] FigureXP, Mark Cowan
      • Re: [ATM] FigureXP, AMaroney
      • Re: [ATM] FigureXP, Bob May
      • Message not available
      • Re: [ATM] FigureXP, Bob May
      • Re: [ATM] FigureXP, Dale Eason
    • Re: [ATM] FigureXP, Mitchell R
  • Re: [ATM] FigureXP, Matt Considine
  • [ATM] FigureXP, Mitchell R
    • Re: [ATM] FigureXP, Dale Eason
      • Re: [ATM] FigureXP, Mitchell R
      • Re: [ATM] FigureXP - monte carlo analysis, Mark Cowan
      • Re: [ATM] FigureXP - monte carlo analysis, Mitchell R
      • Re: [ATM] FigureXP - monte carlo analysis, Mark Cowan
      • Re: [ATM] FigureXP - monte carlo analysis, Mitchell R
      • Re: [ATM] FigureXP - monte carlo analysis, Bob May
      • Re: [ATM] FigureXP - monte carlo analysis, Mark Cowan
      • Re: [ATM] FigureXP - monte carlo analysis, Mitchell R
      • Re: [ATM] FigureXP - monte carlo analysis, Mark Cowan
      • Re: [ATM] FigureXP - monte carlo analysis, Mitchell R
      • Re: [ATM] FigureXP - monte carlo analysis, Mark Cowan
      • Re: [ATM] FigureXP - monte carlo analysis, Mitchell R
      • Re: [ATM] FigureXP - monte carlo analysis, Mark Cowan
      • Re: [ATM] FigureXP - monte carlo analysis, Mitchell R
      • Re: [ATM] FigureXP - monte carlo analysis, Bob May
      • Re: [ATM] FigureXP - monte carlo analysis, Mitchell R
      • Re: [ATM] FigureXP - monte carlo analysis, Bob May
      • Re: [ATM] FigureXP - monte carlo analysis, Mitchell R
      • Re: [ATM] FigureXP - monte carlo analysis, Dale Eason
      • Re: [ATM] FigureXP - monte carlo analysis - use version 3.1.12!, Mark Cowan
      • Re: [ATM] FigureXP - monte carlo analysis, Mitchell R
      • Re: [ATM] FigureXP - monte carlo analysis, Bob May
      • Re: [ATM] FigureXP - monte carlo analysis, Mitchell R
      • Re: [ATM] FigureXP - monte carlo analysis, Bob May
    • Re: [ATM] FigureXP, David Harbour
      • Re: [ATM] FigureXP, Mitchell R
• [ATM] Fwd: help required - or?, Roman Toledo
  • Re: [ATM] Fwd: help required - or?, David Harbour
• [ATM] FW: Hartmann Testing, Ted Cohen
  • Re: [ATM] FW: Hartmann Testing, Virgil.Johnson
• [ATM] FW: Large Thin Mirror, Ted Cohen
  • Re: [ATM] FW: Large Thin Mirror, Mark Cowan
    • Re: [ATM] FW: Large Thin Mirror, Ted Cohen
      • Re: [ATM] FW: Large Thin Mirror, Mel Bartels
• [ATM] Fw: Schiefspiegeler, Francis J. O'Reilly
  • Re: [ATM] Fw: Schiefspiegeler, fundo
    • [ATM] kinda offtopic - b'ars and such ; was Re: Fw: Schiefspiegeler, Guy Brandenburg
    • Re: [ATM] Fw: Schiefspiegeler, Bob May
• [ATM] Fw: "Sky Optical", David Harbour
  • Re: [ATM] Fw: "Sky Optical", Mike Lockwood
    • Re: [ATM] Fw: "Sky Optical", David Harbour
• [ATM] getting correction to the outer inch of a large mirror, Yama, Mark
  • Re: [ATM] getting correction to the outer inch of a large mirror, Mel Bartels
  • Re: [ATM] getting correction to the outer inch of a large mirror, David Harbour
  • <Possible follow-ups>
  • Re: [ATM] getting correction to the outer inch of a large mirror, Yama, Mark
    • Re: [ATM] getting correction to the outer inch of a large mirror, Mel Bartels
• [ATM] Good Cement for Glass Prisms?, David Sleeter
  • Re: [ATM] Good Cement for Glass Prisms?, Bob May
    • Re: [ATM] Good Cement for Glass Prisms?, James Crombie
  • Re: [ATM] Good Cement for Glass Prisms?, George Anderson
  • Re: [ATM] Good Cement for Glass Prisms?, Scott Milligan
• Re: [ATM] help required, Adam Krause
  • <Possible follow-ups>
  • Re: [ATM] help required, Marinus van der Lugt
  • Re: [ATM] help required, Nils Olof Carlin
  • [ATM] help required, Vladimir Galogaza
    • Re: [ATM] help required, Mitch_Bisnauth
    • Re: [ATM] help required, Mark Cowan
    • Re: [ATM] help required - or?, Mark Cowan
      • Re: [ATM] help required - or?, Bob May
      • Re: [ATM] help required - or?, waldo kitty
      • Re: [ATM] help required - or?, David Harbour
      • Re: [ATM] help required - or?, waldo kitty
      • Re: [ATM] help required - or?, David Harbour
    • Re: [ATM] help required, Bob May
  • Re: [ATM] help required, Joseph Johnson
  • Re: [ATM] help required, Jeff Lowe
    • Re: [ATM] help required, Mitch_Bisnauth
• [ATM] help required - or?, Roman Toledo
  • Re: [ATM] help required - or?, David Harbour
  • Re: [ATM] help required - or?, Bob May
• Re: [ATM] Hex tool page, Matt Considine
• [ATM] Hex tool page ..., Matt Considine
  • Re: [ATM] Hex tool page ..., David Harbour
  • Re: [ATM] Hex tool page ..., Bill Wheaton
    • Re: [ATM] Hex tool page ..., David Harbour
      • Re: [ATM] Hex tool page ..., Matt Considine
      • Re: [ATM] Hex tool page ..., David Harbour
      • Re: [ATM] Hex tool page ..., Matt Considine
• [ATM] 'Home Brew' - Autofocuser, Dave Grennan
  • Re: [ATM] 'Home Brew' - Autofocuser, Peter
    • Re: [ATM] 'Home Brew' - Autofocuser, David Harbour
  • Re: [ATM] 'Home Brew' - Autofocuser, Scott Ewart
    • Re: [ATM] 'Home Brew' - Autofocuser, Dave Grennan
  • Re: [ATM] 'Home Brew' - Autofocuser [V-curve linearity], don clement
• [ATM] incomplete mirror stripping, Tom Conlin
  • Re: [ATM] incomplete mirror stripping, hermit
  • <Possible follow-ups>
  • Re: [ATM] incomplete mirror stripping, lenses
    • Re: [ATM] incomplete mirror stripping, Tom Conlin
      • Re: [ATM] incomplete mirror stripping, Bill Wheaton
      • Re: [ATM] incomplete mirror stripping, Guy Brandenburg
  • Re: [ATM] incomplete mirror stripping, lenses
    • Re: [ATM] incomplete mirror stripping, Bill Wheaton
• [ATM] industrial sight glass source, David Weinshenker
• Re: [ATM] Is there an optimum tilt?, Vladimir Galogaza
• [ATM] Large mirror coaters?, Tom Glinos
• [ATM] Large Thin Mirror, Dave Tabor
  • Re: [ATM] Large Thin Mirror, Ted Cohen
  • Re: [ATM] Large Thin Mirror, Bob May
  • Re: [ATM] Large Thin Mirror, Mark Cowan
    • Re: [ATM] Large Thin Mirror, Dave Smith
      • Re: [ATM] Large Thin Mirror, mbartels
      • Re: [ATM] Large Thin Mirror, lütfü çakmak
      • Re: [ATM] Large Thin Mirror, mbartels
      • Re: [ATM] Large Thin Mirror, Mark Cowan
      • Re: [ATM] Large Thin Mirror, Jerry
      • Re: [ATM] Large Thin Mirror, David Harbour
      • [ATM] Lutfu's 15" Large Thin Mirror, Jerry
      • Re: [ATM] Lutfu's 15" Large Thin Mirror, David Harbour
      • [ATM] Large Thin Mirrors... and Ultralights, oh my, Mark Cowan
      • Re: [ATM] Large Thin Mirrors... and Ultralights, oh my, Dave Smith
    • Re: [ATM] Large Thin Mirror, Ted Cohen
      • Re: [ATM] Large Thin Mirror, Dale Eason
      • Re: [ATM] Large Thin Mirror, Ted Cohen
      • Re: [ATM] Large Thin Mirror, Mike Lockwood
      • Re: [ATM] Large Thin Mirror, Ted Cohen
      • Re: [ATM] Large Thin Mirror, Mark Cowan
      • Re: [ATM] Large Thin Mirror, Bob May
      • Re: [ATM] Large Thin Mirror, Ted Cohen
      • Re: [ATM] Large Thin Mirror, Bob May
      • Re: [ATM] Large Thin Mirror, Don R Surles
      • Re: [ATM] Large Thin Mirror, Ted Cohen
      • Re: [ATM] Large Thin Mirror, Bob May
      • Re: [ATM] Large Thin Mirror, Mark Cowan
      • Re: [ATM] Large Thin Mirror, Jim Burrows
      • Re: [ATM] Large Thin Mirror, Mark Cowan
      • [ATM] mirror temperature tracking to ambient, Mel Bartels
      • [ATM] Hartmann Testing, Ted Cohen
      • Re: [ATM] Hartmann Testing, Mark Cowan
      • Re: [ATM] Hartmann Testing, Ted Cohen
      • Re: [ATM] Hartmann Testing, Jim Burrows
      • Re: [ATM] Hartmann Testing, Ted Cohen
      • Re: [ATM] Large Thin Mirror, Dale Eason
      • [ATM] "Floatation", Ted Cohen
      • Message not available
      • Re: [ATM] "Floatation", Ted Cohen
      • Re: [ATM] "Floatation", Vladimir Galogaza
      • Re: [ATM] "Floatation", Ted Cohen
      • Re: [ATM] "Floatation", David Harbour
      • Re: [ATM] "Floatation", Stan Truitt
      • Re: [ATM] "Floatation", don clement
      • Re: [ATM] "Floatation", David Harbour
      • Re: [ATM] "Floatation", Mel Bartels
      • Message not available
      • Re: [ATM] "Floatation", Ted Cohen
  • <Possible follow-ups>
  • Re: [ATM] Large Thin Mirror, Nils Olof Carlin
• [ATM] Long Radius Sector Drive-, David Harbour
• [ATM] Material for Tool, Roman Toledo
  • Re: [ATM] Material for Tool, Bob May
• Re: [ATM] Material for Tool, Mark Holm
  • Re: [ATM] Material for Tool, Bill Wheaton
    • Re: [ATM] Material for Tool, Bob May
      • Message not available
      • Re: [ATM] Material for Tool, Bob May
      • Re: [ATM] Material for Tool, Mitch_Bisnauth
    • Re: [ATM] Material for Tool, Mark Holm
      • Re: [ATM] Material for Tool, Mark Holm
      • Re: [ATM] Material for Tool, David Harbour
      • Re: [ATM] Material for Tool, Bill Wheaton
      • Re: [ATM] Material for Tool, Mark Holm
• [ATM] Mirror cell ramblings re: thin plate glass 3/4-inch x 24-inch, Ted Cohen
  • Re: [ATM] Mirror cell ramblings re: thin plate glass 3/4-inch x 24-inch, Dale Eason
    • Re: [ATM] Mirror cell ramblings re: thin plate glass 3/4-inch x24-inch, Ted Cohen
      • Re: [ATM] Mirror cell ramblings re: thin plate glass 3/4-inch x24-inch, Dale Eason
      • Re: [ATM] Mirror cell ramblings re: thin plate glass 3/4-inch x24-inch, Dale Eason
      • Re: [ATM] Mirror cell ramblings re: thin plate glass 3/4-inchx24-inch, Ted Cohen
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, David Harbour
      • Re: [ATM] Mirror cell ramblings re: thin plate glass 3/4-inchx24-inch, Bob May
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Ted Cohen
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Mel Bartels
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Ted Cohen
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Dale Eason
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Ted Cohen
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Dale Eason
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Ted Cohen
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Bob May
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Dale Eason
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Bob May
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, David Harbour
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Bill Wheaton
      • [ATM] Vibration free test seutp for Bath interferometer was Re: Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Dale Eason
      • Re: [ATM] Vibration free test seutp for Bath interferometer was Re:Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, David Harbour
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Bob May
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, David Harbour
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Guy Brandenburg
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, David Harbour
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, fundo
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Bob May
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, fundo
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Bob May
      • Message not available
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Bob May
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, David Harbour
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Alexis Cousein
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, David Harbour
      • Re: [ATM] Mirror cell ramblings / equal area support design, kreig
      • Re: [ATM] Mirror cell ramblings / equal area support design, David Harbour
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Bob May
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, David Harbour
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Ted Cohen
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, David Harbour
      • Re: [ATM] Mirror cell ramblings re: thin plate glass3/4-inchx24-inch, Bob May
  • Re: [ATM] Mirror cell ramblings re: thin plate glass 3/4-inch x 24-inch, Mel Bartels
    • Re: [ATM] Mirror cell ramblings re: thin plate glass 3/4-inch x 24-inch, Dominic-Luc Webb
  • Re: [ATM] Mirror cell ramblings re: thin plate glass 3/4-inch x 24-inch, Bob May
• Re: [ATM] Mirror cell ramblings re: thin plate glass 3/4-inchx24-inch, Dave Grandeffo
  • Re: [ATM] Mirror cell ramblings re: thin plate glass 3/4-inchx24-inch, Dale Eason
• [ATM] MIRROR POLISHING QUESTION, horace r davis
  • Re: [ATM] MIRROR POLISHING QUESTION, hermit
    • Re: [ATM] MIRROR POLISHING QUESTION, Francis J. O'Reilly
      • Re: [ATM] MIRROR POLISHING QUESTION, David Harbour
  • Re: [ATM] MIRROR POLISHING QUESTION, Ken Hunter
  • Re: [ATM] MIRROR POLISHING QUESTION, Bob May
  • <Possible follow-ups>
  • Re: [ATM] MIRROR POLISHING QUESTION, Ken Hunter
• [ATM] need rcos for a 12vdc power supply like the vector jump start system, RP
  • Re: [ATM] need rcos for a 12vdc power supply like the vector jump start system, George Anderson
• [ATM] (no subject), leftfieldstar
  • [ATM] Historical book on optics eBay, leftfieldstar
  • Re: [ATM] Very expensive geometry book, David Harbour
• [ATM] OT: Re: Monster Tools, Bill Wheaton
• [ATM] OT: Who is going to RTMC, Richard Ozer
  • Re: [ATM] OT: Who is going to RTMC, don clement
    • Re: [ATM] OT: Who is going to RTMC, Gil McFarlane
      • Re: [ATM] OT: Who is going to RTMC, Bill Wheaton
      • Re: [ATM] OT: Who is going to RTMC, fundo
      • Message not available
      • Re: [ATM] OT: Who is going to RTMC, rozer
      • Re: [ATM] OT: Who is going to RTMC, Bob May
      • Re: [ATM] OT: Who is going to RTMC, Ross Sackett
      • Re: [ATM] OT: Who is going to RTMC, Richard Ozer
      • Re: [ATM] OT: Who is going to RTMC, Guy Brandenburg
      • Re: [ATM] OT: Who is going to RTMC; size of the earth in "feet", Ross Sackett
• [ATM] polishing question, horace r davis
  • Re: [ATM] polishing question, Guy Brandenburg
  • Re: [ATM] polishing question, Ken Hunter
• Re: [ATM] Polishing under vacuum, Ted & Joan Foster
  • Re: [ATM] Polishing under vacuum, Richard
• [ATM] Polishing with vacuum, Ted & Joan Foster
  • Re: [ATM] Polishing with vacuum, Vladimir Galogaza
    • Re: [ATM] Polishing with vacuum, Everett Cairns
    • Re: [ATM] Polishing with vacuum, Everett Cairns
  • Re: [ATM] Polishing with vacuum, Bob May
• [ATM] question about plop obstruction(s), waldo kitty
  • Re: [ATM] question about plop obstruction(s), Mark Holm
    • Re: [ATM] question about plop obstruction(s), Bob May
  • Re: [ATM] question about plop obstruction(s), Mark Holm
• [ATM] Re Stellafane, Jeff Lowe
• [ATM] RTMC 2008 - cold, Gil McFarlane
  • Re: [ATM] RTMC 2008 - cold, Thomas Janstrom
• [ATM] RTMC snow, don clement
  • Re: [ATM] RTMC snow - meet at Don's, Gil McFarlane
  • Re: [ATM] RTMC snow, Bob May
  • Re: [ATM] RTMC snow, don clement
• [ATM] Schiefspeigler, Francis J. O'Reilly
  • Message not available
    • Re: [ATM] Schiefspeigler, Francis J. O'Reilly
      • Re: [ATM] Schiefspeigler, David Harbour
      • Re: [ATM] Schiefspiegeler, Richard F.L.R. Snashall
      • Re: [ATM] Schiefspiegeler, Francis J. O'Reilly
      • Re: [ATM] Schiefspiegeler, Richard F.L.R. Snashall
      • Re: [ATM] Schiefspiegeler, Francis J. O'Reilly
      • Re: [ATM] Schiefspiegeler, Philip Lardner
  • Re: [ATM] Schiefspeigler, Gary Fuchs
• Re: [ATM] Scopes for the masses, David Harbour
  • Re: [ATM] Scopes for the masses, Dominic-Luc Webb
    • Re: [ATM] Scopes for the masses, David Harbour
    • Re: [ATM] Scopes for the masses, Bob May
    • Re: [ATM] Scopes for the masses, Mircea Pteancu
  • <Possible follow-ups>
  • Re: [ATM] Scopes for the masses, Neil Booker
  • [ATM] Scopes for the masses, Mircea Pteancu
• Re: [ATM] simplest ever unobstructed scope, Richard F.L.R. Snashall
  • Re: [ATM] simplest ever unobstructed scope, David Harbour
• [ATM] Source for Ebony Star, David Opderbeck
  • Re: [ATM] Source for Ebony Star, Francis J. O'Reilly
  • Re: [ATM] Source for Ebony Star, Peter
  • <Possible follow-ups>
  • Re: [ATM] Source for Ebony Star, GFPhoto
• [ATM] Stellafane, Christian Maciel
  • Re: [ATM] Stellafane, Francis J. O'Reilly
• [ATM] sub diameter tool, shyam rathod
  • Re: [ATM] sub diameter tool, Bob May
    • [ATM] notes on working small diameter glass \ Re: sub diameter tool, David Weinshenker
• [ATM] suppliers optical telescopes, Fabio Visini
  • Re: [ATM] suppliers optical telescopes, Mircea Pteancu
    • Re: [ATM] suppliers optical telescopes, Dominic-Luc Webb
  • Re: [ATM] suppliers optical telescopes, Bob May
    • Re: [ATM] suppliers optical telescopes, Richard F.L.R. Snashall
      • Re: [ATM] suppliers optical telescopes, Bob May
• Re: [ATM] Telescope could focus light without a mirror or lens, pauldkline
  • <Possible follow-ups>
  • Re: [ATM] Telescope could focus light without a mirror or lens, Jarvis Krumbein
• [ATM] Thick plate glass for objective lens, David Harbour
  • Re: [ATM] Thick plate glass for objective lens, Richard F.L.R. Snashall
    • Re: [ATM] Thick plate glass for objective lens, Bill Wheaton
      • Re: [ATM] Thick plate glass for objective lens, Richard F.L.R. Snashall
    • Re: [ATM] Thick plate glass for objective lens (Not), Richard F.L.R. Snashall
      • Re: [ATM] Thick plate glass for objective lens (Not), Richard F.L.R. Snashall
• [ATM] Thin glass and cost, Russell Jocoy
  • Re: [ATM] Thin glass and cost, David Harbour
  • [ATM] weight, was RE: Thin glass and cost, bbastro1
    • Re: [ATM] weight, was RE: Thin glass and cost, Bob May
      • [ATM] Wire Spider, Corona Australis
      • Re: [ATM] Wire Spider, Jan van Gastel
      • Re: [ATM] Wire Spider, Dave Smith
      • Re: [ATM] Wire Spider, Corona Australis
      • Re: [ATM] Wire Spider, Jerry Hillman
• [ATM] Tool Tiles, Bill Wheaton
  • Re: [ATM] Tool Tiles, bbastro1
    • Re: [ATM] Tool Tiles, Peter De Baan
    • Re: [ATM] Tool Tiles, Bill Wheaton
  • Re: [ATM] Tool Tiles, Mark Holm
    • Re: [ATM] Tool Tiles, hermit
      • Re: [ATM] Tool Tiles, Bill Wheaton
      • Re: [ATM] Tool Tiles, hermit
    • Re: [ATM] Tool Tiles, Bill Wheaton
      • Re: [ATM] Tool Tiles, Bob May
      • Re: [ATM] Tool Tiles, Mark Holm
      • Re: [ATM] Tool Tiles, Bill Wheaton
    • Re: [ATM] Tool Tiles, Mike Lockwood
  • Re: [ATM] Tool Tiles, Bob May
    • Re: [ATM] Tool Tiles, Bill Wheaton
  • Re: [ATM] Tool Tiles, David Harbour
    • Re: [ATM] Tool Tiles, Ron Gafron
      • Re: [ATM] Tool Tiles, David Harbour
      • Re: [ATM] Tool Tiles, fundo
      • Re: [ATM] Tool Tiles, David Harbour
      • Re: [ATM] Tool Tiles, KR
      • Re: [ATM] Tool Tiles, Mitchell R
      • Re: [ATM] Tool Tiles, KR
      • Re: [ATM] Tool Tiles, David Harbour
      • Re: [ATM] Tool Tiles, Mitchell R
      • Re: [ATM] Tool Tiles, David Harbour
      • Re: [ATM] Tool Tiles, David Harbour
      • Re: [ATM] Tool Tiles, Bob May
      • Re: [ATM] Tool Tiles, David Harbour
    • Re: [ATM] Tool Tiles, Bill Wheaton
• [ATM] Understanding Foucault, Francis J. O'Reilly
  • Re: [ATM] Understanding Foucault, Mitchell R
• [ATM] UPDATED need recos for a 12vdc power supply like the vector jump start system, RP
  • Re: [ATM] UPDATED need recos for a 12vdc power supply like the vectorjump start system, Bob May
    • Message not available
      • Re: [ATM] UPDATED need recos for a 12vdc power supply like the vectorjumpstart system, Bob May
      • Re: [ATM] UPDATED need recos for a 12vdc power supply like the vectorjumpstart system, Lawrence D. Lopez
      • Re: [ATM] UPDATED need recos for a 12vdc power supply like the vectorjumpstart system, Jim Burrows
  • Re: [ATM] UPDATED need recos for a 12vdc power supply like the vector jump start system, Mark Holm
• [ATM] UPDATED need recos for a 12vdc power supply like the vectorjumpstart system, Roman Toledo
• Re: [ATM] ATM: 7 autographed, personalized, free copies of book-, "Neil"
  • Re: [ATM] ATM: 7 autographed, personalized, free copies of book-, David Harbour
• Re: [ATM] ATM: Please answer simple question - Inverted visualfields, "Neil"
• [ATM] virtual telescope, Vladimir Galogaza
• [ATM] What a wonderful sound!, Bill Wheaton
  • Re: [ATM] What a wonderful sound!, Francis J. O'Reilly
    • Re: [ATM] What a wonderful sound!, Bill Wheaton
  • Re: [ATM] What a wonderful sound!, Mark Holm
    • Re: [ATM] What a wonderful sound!, Bill Wheaton
    • Re: [ATM] What a wonderful sound!, Bob May
      • Re: [ATM] What a wonderful sound!, David Harbour
      • Re: [ATM] What a wonderful sound!, Bill Wheaton
      • Re: [ATM] What a wonderful sound!, Bill Wheaton
      • Re: [ATM] What a wonderful sound!, Bob May
      • Re: [ATM] What a wonderful sound!, Bob May
• [ATM] Why wire?, Jerry Hillman
  • Re: [ATM] Why wire?, Mark Cowan
    • Re: [ATM] Why wire?, Corona Australis
      • Re: [ATM] Why wire?, Mark Cowan
• Re: [ATM] Wire Spider, J H M van Gastel
  • Re: [ATM] Wire Spider, Francis J. O'Reilly
    • Re: [ATM] Wire Spider, fundo
      • Re: [ATM] Wire Spider, Jan van Gastel
      • Re: [ATM] Wire Spider, David Harbour
      • Re: [ATM] Wire Spider, Jerry Hillman
      • Re: [ATM] Wire Spider, Dale Eason
      • Re: [ATM] Wire Spider, David Harbour
      • Re: [ATM] Wire Spider 3-vane, Mark Cowan
      • Re: [ATM] Wire Spider 3-vane, Corona Australis
      • Re: [ATM] Wire Spider 3-vane, Bill Wheaton
      • Message not available
      • Re: [ATM] Wire Spider 3-vane, Bill Wheaton
      • Re: [ATM] Wire Spider JIG, Dave Smith
      • Re: [ATM] Wire Spider JIG, Mike Lockwood
      • Re: [ATM] Wire Spider JIG, Dave Smith
      • Re: [ATM] Wire Spider 3-vane, Mark Cowan
      • [ATM] Wire Spider - Stable 3-vane design!, Mark Cowan
      • Re: [ATM] Wire Spider, Mel Bartels
      • Re: [ATM] Wire Spider, Corona Australis
      • Re: [ATM] Wire Spider, David Harbour
      • Re: [ATM] Wire Spider, Corona Australis
      • Re: [ATM] Wire Spider, Mark Cowan
      • [ATM] Betr.: Re: Wire Spider, Harro Treur
      • Re: [ATM] Betr.: Re: Wire Spider, Mark Cowan
      • Re: [ATM] Betr.: Re: Wire Spider, Bob May
      • Re: [ATM] Wire Spider--Spider Wire, Dave Smith
    • [ATM] Betr.: Re: Wire Spider, Harro Treur
  • <Possible follow-ups>
  • Re: [ATM] Wire Spider, Arjan te Marvelde \(hetnet\)
• [ATM] Wire spider - My way., Jerry Hillman
• [ATM] Yet another hogging question, Bill Wheaton
  • Re: [ATM] Yet another hogging question, Mel Bartels
  • <Possible follow-ups>
  • Re: [ATM] Yet another hogging question, junk wheaton
• Re: [ATM] Yet another hogging question (Bill Wheaton) - May 2, chris forder
  • Re: [ATM] Yet another hogging question (Bill Wheaton) - May 2, Bob May
  • Re: [ATM] Yet another hogging question (Bill Wheaton) - May 2, Mitch_Bisnauth