[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Wire Spider

To: <atm@atmlist.net>
Subject: Re: [ATM] Wire Spider
From: "Arjan te Marvelde \(hetnet\)" <arjan.te.marvelde@hetnet.nl>
Date: Thu, 29 May 2008 10:34:39 +0200
Delivered-to: atm_arc@astro.umsystem.edu
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <mailman.1.1211943600.11203.atm@atmlist.net>
Sender: atm-bounces@atmlist.net

In the past, there has been a discussion about loss of collimation due to 
the secondary weight stretching the wires differently at different elevation 
angles.
For those interested in modelling this effect I have a spreadsheet for 
download at:
        http://www.udjat.nl/atm/resource/resource.html
halfway down the page under Excel.

AtM 

_______________________________________________
ATM mailing list http://www.atmlist.net/

Prev by Author: Re: [ATM] ATM Digest, Vol 53, Issue 21
Next by Author: Re: [ATM] Astigmatism on thin blanks
Previous by thread: [ATM] Betr.: Re: Wire Spider
Next by thread: [ATM] Wire spider - My way.
Index(es):
- Author
- Thread