Amateur Telescope Makers (ATM) Archive for MAY07 - by thread

• Author Index

• Re: [ATM] [Atmadmin] no luck with FTP, Dominic-Luc Webb
  • Re: [ATM] [Atmadmin] no luck with FTP, Richard
  • Re: [ATM] [Atmadmin] no luck with FTP, Eric S. Johansson
  • Re: [ATM] [Atmadmin] no luck with FTP, Michael Lindner
    • Re: [ATM] [Atmadmin] no luck with FTP, Dominic-Luc Webb
      • Re: [ATM] [Atmadmin] no luck with FTP, Michael Lindner
• [ATM] ATM and young people, Gil McFarlane
  • Re: [ATM] ATM and young people, Mitch
    • Re: [ATM] ATM and young people, shyam rathod
  • Re: [ATM] ATM and young people, Kevin MIchael Zabbo
  • <Possible follow-ups>
  • Re: [ATM] ATM and young people, fundo
• Re: [ATM] ATM Digest, Vol 41, Issue 17, Arjan te Marvelde
• Re: [ATM] ATM Digest, Vol 41, Issue 2, Curt Diggs
• Re: [ATM] ATM Digest, Vol 41, Issue 8, vorblesnak
• [ATM] Blue 18" single pole ultralight, again, Ross Sackett
• [ATM] Can one build a Newtonian stiff enough to use a Guide Scope?, Walter Belhaven
  • Re: [ATM] Can one build a Newtonian stiff enough to use a Guide Scope?, Jean-Guy Moreau
• Re: [ATM] Can one build a Newtonian stiff enough to use a Guide Scope?, Bob Lombardi
  • Re: [ATM] Can one build a Newtonian stiff enough to use a Guide Scope?, George Anderson
• [ATM] chip on mirror edge, horace r davis
  • Re: [ATM] chip on mirror edge, Francis J. O'Reilly
  • <Possible follow-ups>
  • Re: [ATM] chip on mirror edge, Francis J. O'Reilly
• Re: [ATM] Chriss Schur's solution, George Anderson
• Re: [ATM] Congratulations to Ross Sackett, fundo
  • Re: [ATM] Congratulations to Ross Sackett, Don D'Egidio
  • <Possible follow-ups>
  • Re: [ATM] Congratulations to Ross Sackett, NGC704
    • Re: [ATM] Congratulations to Ross Sackett, Scott Ewart
• Re: [ATM] Coulter secondary adhesive, Jarvis Krumbein
  • [ATM] Gluing mirrors - was Coulter secondary adhesive, Chris Dalla Piazza
    • Re: [ATM] Gluing mirrors - was Coulter secondary adhesive, Mike Lockwood
• [ATM] done with wao 25, horace r davis
  • Re: [ATM] done with wao 25, Mitch
• [ATM] fishing for a lil polishing advice!, Norm Prince
  • Re: [ATM] fishing for a lil polishing advice!, Jim McPherson
  • Re: [ATM] fishing for a lil polishing advice!, Francis J. O'Reilly
  • Re: [ATM] fishing for a lil polishing advice!, Ken Hunter
  • <Possible follow-ups>
  • Re: [ATM] fishing for a lil polishing advice!, Norm Prince
    • Re: [ATM] fishing for a lil polishing advice!, Anthony Anconetani
      • Re: [ATM] fishing for a lil polishing advice!, Mike Lockwood
      • Re: [ATM] fishing for a lil polishing advice!, Anthony Anconetani
      • Re: [ATM] fishing for a lil polishing advice!, Mike Lockwood
      • Re: [ATM] fishing for a lil polishing advice!, Jeff Rowe
      • Re: [ATM] fishing for a lil polishing advice!, Ken Hunter
      • Re: [ATM] fishing for a lil polishing advice!, Ken Hunter
      • Re: [ATM] fishing for a lil polishing advice!, Mike Lockwood
      • Re: [ATM] fishing for a lil polishing advice!, Jim Burrows
      • Re: [ATM] fishing for a lil polishing advice!, Anthony Anconetani
    • Re: [ATM] fishing for a lil polishing advice!, Jerry
      • Re: [ATM] fishing for a lil polishing advice!, Mike Lockwood
      • Re: [ATM] fishing for a lil polishing advice!, Norm Prince
      • Re: [ATM] fishing for a lil polishing advice!, Jerry
• [ATM] Focal Length Accuracy, Anthony Anconetani
  • Re: [ATM] Focal Length Accuracy, Ken Hunter
  • Message not available
    • Re: [ATM] Focal Length Accuracy, Jim Burrows
      • Re: [ATM] Focal Length Accuracy, Anthony Anconetani
      • Re: [ATM] Focal Length Accuracy, Dominic-Luc Webb
      • Re: [ATM] Focal Length Accuracy, Mike Lockwood
      • Re: [ATM] Focal Length Accuracy, Ken Hunter
      • Re: [ATM] Focal Length Accuracy, Dominic-Luc Webb
      • Re: [ATM] Focal Length Accuracy, Mike Lockwood
  • <Possible follow-ups>
  • Re: [ATM] Focal Length Accuracy, Anthony Anconetani
• [ATM] Foucault imaging fast mirrors?, Dominic-Luc Webb
  • Re: [ATM] Foucault imaging fast mirrors?, aart
  • Re: [ATM] Foucault imaging fast mirrors?, James Sturtevant
• [ATM] Ghosts in the Coulter, vorblesnak
  • Re: [ATM] Ghosts in the Coulter, Lawrence D. Lopez
  • Re: [ATM] Ghosts in the Coulter, Tim Hager
    • Re: [ATM] Ghosts in the Coulter, Stephen Koehler
      • Re: [ATM] Ghosts in the Coulter, Tim Hager
      • Re: [ATM] Ghosts in the Coulter, Mike Lockwood
      • Re: [ATM] Ghosts in the Coulter, Don R Surles
  • <Possible follow-ups>
  • [ATM] Ghosts in the Coulter, vorblesnak
    • Re: [ATM] Ghosts in the Coulter, Stephen Koehler
      • Re: [ATM] Ghosts in the Coulter, Mike Lockwood
    • Re: [ATM] Ghosts in the Coulter, Mitch
      • Re: [ATM] Ghosts in the Coulter, Vladimir Galogaza
      • Re: [ATM] Ghosts in the Coulter, Joe
  • [ATM] Ghosts in the Coulter, vorblesnak
    • Re: [ATM] Ghosts in the Coulter, Vladimir Galogaza
  • Re: [ATM] Ghosts in the Coulter, Vladimir Galogaza
    • Re: [ATM] Ghosts in the Coulter, Jerry
      • Re: [ATM] Ghosts in the Coulter, John Murray
  • Re: [ATM] Ghosts in the Coulter, Arjan te Marvelde
    • Re: [ATM] Ghosts in the Coulter, Vladimir Galogaza
      • Re: [ATM] Ghosts in the Coulter, Richard
      • Re: [ATM] Ghosts in the Coulter, Vladimir Galogaza
  • Re: [ATM] Ghosts in the Coulter, Arjan te Marvelde
    • Re: [ATM] Ghosts in the Coulter, Michael Lindner
    • Re: [ATM] Ghosts in the Coulter, Richard F.L.R. Snashall
• [ATM] heat, horace r davis
  • Re: [ATM] heat, Norm Prince
    • Re: [ATM] heat, Richard
      • Re: [ATM] heat, Michael Lindner
      • Re: [ATM] heat, Dominic-Luc Webb
      • Re: [ATM] heat, Richard
      • Re: [ATM] heat, hermit
      • Re: [ATM] heat- OT, Dave Smith
• [ATM] In Need of a Mirror coater, Samuel DiRocco
  • Re: [ATM] In Need of a Mirror coater, jcmulherin
  • <Possible follow-ups>
  • Re: [ATM] In Need of a Mirror coater, Samuel DiRocco
    • Re: [ATM] In Need of a Mirror coater, Charles Broward
  • Re: [ATM] In Need of a Mirror coater, Jarvis Krumbein
    • Re: [ATM] In Need of a Mirror coater, Samuel DiRocco
      • Re: [ATM] In Need of a Mirror coater, Michael Lindner
• [ATM] Is ATMing really disappearing?, Dominic-Luc Webb
  • Re: [ATM] Is ATMing really disappearing?, hermit
    • Re: [ATM] Is ATMing really disappearing?, Michael Lindner
    • Re: [ATM] Is ATMing really disappearing?, Dominic-Luc Webb
      • Re: [ATM] Is ATMing really disappearing?, hermit
  • Re: [ATM] Is ATMing really disappearing?, lance clarke
    • Re: [ATM] Is ATMing really disappearing?, Jerry
      • Re: [ATM] Is ATMing really disappearing?, hermit
    • Re: [ATM] Is ATMing really disappearing?, Mitch
  • Re: [ATM] Is ATMing really disappearing?, James Gort
    • Re: [ATM] Is ATMing really disappearing?, Dave Smith
      • Re: [ATM] Is ATMing really disappearing?, James Gort
    • Re: [ATM] Is ATMing really disappearing?, Robert Mohr
      • Re: [ATM] Is ATMing really disappearing?, Michael Lindner
  • <Possible follow-ups>
  • Re: [ATM] Is ATMing really disappearing?, GARY FUCHS
    • Re: [ATM] Is ATMing really disappearing?, PaulG
      • Re: [ATM] Is ATMing really disappearing?, hermit
      • Re: [ATM] Is ATMing really disappearing?, Richard
      • Re: [ATM] Is ATMing really disappearing?, Michael Lindner
      • Re: [ATM] Is ATMing really disappearing?, Dominic-Luc Webb
  • Re: [ATM] Is ATMing really disappearing?, fundo
    • Re: [ATM] Is ATMing really disappearing?, Jerry
      • Re: [ATM] Is ATMing really disappearing?, Michael Lindner
      • Re: [ATM] Is ATMing really disappearing?, Jerry
      • Re: [ATM] Is ATMing really disappearing?, Mitch
      • Re: [ATM] Is ATMing really disappearing?, Jerry
      • Re: [ATM] Is ATMing really disappearing?, Mike Lockwood
  • Re: [ATM] Is ATMing really disappearing?, Jack.Swaton@starryhost.com
• [ATM] lap tool, horace r davis
  • Re: [ATM] lap tool, Bob May
• [ATM] make pitch lap tool, horace r davis
  • Re: [ATM] make pitch lap tool, Kevin MIchael Zabbo
  • Re: [ATM] make pitch lap tool, Jerry
  • Re: [ATM] make pitch lap tool, Jerry
    • Re: [ATM] make pitch lap tool, Richard
  • Re: [ATM] make pitch lap tool, Bob May
  • <Possible follow-ups>
  • Re: [ATM] make pitch lap tool, Dave Gee
• [ATM] martin Lyons thanks, horace r davis
• [ATM] mirror stuck, horace r davis
  • Re: [ATM] mirror stuck, Steve Beccue
    • Re: [ATM] mirror stuck, Guy Brandenburg
• Re: [ATM] New minimalist single-pole 18" ultralight, Mel Bartels
  • <Possible follow-ups>
  • Re: [ATM] New minimalist single-pole 18" ultralight, Arjan te Marvelde
• Re: [ATM] No fringes, Bob May
• [ATM] (no subject), Mitch
  • <Possible follow-ups>
  • Re: [ATM] (no subject), GARY FUCHS
    • Re: [ATM] (no subject) (should have been FIRST LIGHT), Mitch
• Re: [ATM] patterns for antique camera focusers, Don Clement
• [ATM] pitch lap, horace r davis
  • Re: [ATM] pitch lap, Norm Prince
• [ATM] pitch lap help, horace r davis
  • Re: [ATM] pitch lap help, Thomas A. Moulton
  • Re: [ATM] pitch lap help, Kowalski, Mark S
    • Re: [ATM] pitch lap help, Jerry
      • Re: [ATM] pitch lap help, Dave Smith
  • Re: [ATM] pitch lap help, Bob May
  • <Possible follow-ups>
  • Re: [ATM] pitch lap help, horace r davis
• [ATM] pitch lap tool, horace r davis
  • Re: [ATM] pitch lap tool, Mike Lockwood
• [ATM] pitch tool, horace r davis
  • Re: [ATM] pitch tool, Kevin MIchael Zabbo
  • <Possible follow-ups>
  • [ATM] pitch tool, horace r davis
    • Re: [ATM] pitch tool, Dale Eason
  • Re: [ATM] pitch tool, vorblesnak
• [ATM] pitch tool done, horace r davis
• [ATM] pitch too stuck, horace r davis
• [ATM] Polishing NaCl IR Filters, Curt Diggs
  • Re: [ATM] Polishing NaCl IR Filters, Jan Bentz
  • Re: [ATM] Polishing NaCl IR Filters, aart
  • Re: [ATM] Polishing NaCl IR Filters, Vladimir Galogaza
  • Re: [ATM] Polishing NaCl IR Filters, Dominic-Luc Webb
    • Re: [ATM] Polishing NaCl IR Filters, Vladimir Galogaza
      • Re: [ATM] Polishing NaCl IR Filters, Dominic-Luc Webb
  • <Possible follow-ups>
  • Re: [ATM] Polishing NaCl IR Filters, Curt Diggs
  • Re: [ATM] Polishing NaCl IR Filters, Jeff Lowe
• Re: [ATM] Polishing NaCl IR Filters Some suggestions, Thomas Peck
• [ATM] Reducing the outer zone in figuring, David Steinhauer
  • Re: [ATM] Reducing the outer zone in figuring, Jerry
  • Re: [ATM] Reducing the outer zone in figuring, Jim Burrows
  • <Possible follow-ups>
  • Re: [ATM] Reducing the outer zone in figuring, Arjan te Marvelde
    • Re: [ATM] Reducing the outer zone in figuring, Mike Lockwood
  • Re: [ATM] Reducing the outer zone in figuring, Arjan te Marvelde
    • Re: [ATM] Reducing the outer zone in figuring, Michael Lindner
      • Re: [ATM] Reducing the outer zone in figuring, Arjan te Marvelde
• [ATM] Reducing the outer zone in figuring - I did it! My first mirror is done!, David Steinhauer
  • Re: [ATM] Reducing the outer zone in figuring - I did it! My first mirror is done!, Mitch
  • Re: [ATM] Reducing the outer zone in figuring - I did it! My first mirror is done!, Jerry
• [ATM] repressing pitch tool, horace r davis
  • Re: [ATM] repressing pitch tool, hermit
• [ATM] Reuse, Richard F.L.R. Snashall
  • Re: [ATM] Reuse, Richard F.L.R. Snashall
• [ATM] sanding tile tool, horace r davis
  • Re: [ATM] sanding tile tool, Bob May
  • Re: [ATM] sanding tile tool, Mike Lockwood
• [ATM] Servo Motors: Gear Reduction and Encoder Resolution, Martin Cibulski
  • Re: [ATM] Servo Motors: Gear Reduction and Encoder Resolution, Ashley Roll
• [ATM] Similar problem with reflections, RP
• [ATM] Square Flats, aneves
• [ATM] Squeeze bottle, horace r davis
  • Re: [ATM] Squeeze bottle, Norm Prince
    • Re: [ATM] Squeeze bottle, Kevin MIchael Zabbo
      • Re: [ATM] Squeeze bottle, Guy Brandenburg
• [ATM] Telescope Optics Book Examples, Michael Lindner
• [ATM] Telescope stores or dealers in Moscow?, fabio
• Re: [ATM] The future of amateur telescope making ..., vorblesnak
• Re: [ATM] the future of amateur telescope making and amateur, Tom and Beth
• [ATM] the future of amateur telescope making and amateur astronomy, Mel Bartels
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, David Nicholls
    • Re: [ATM] the future of amateur telescope making and amateur astronomy, Mike Lockwood
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, marinus van der Lugt
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, Tony Owens
    • Re: [ATM] the future of amateur telescope making and amateurastronomy, Kowalski, Mark S
      • Re: [ATM] the future of amateur telescope making and amateurastronomy, Dominic-Luc Webb
      • Re: [ATM] the future of amateur telescope making and amateurastronomy, Kowalski, Mark S
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, James Lerch
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, Kevin MIchael Zabbo
    • Re: [ATM] the future of amateur telescope making and amateur astronomy, Thomas A. Moulton
    • Re: [ATM] the future of amateur telescope making and amateur astronomy, Jerry
    • Re: [ATM] the future of amateur telescope making and amateur astronomy, Chris Rowland
      • Re: [ATM] the future of amateur telescope making and amateur astronomy, Dominic-Luc Webb
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, Peter
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, Jerry P. Reddell
    • Re: [ATM] the future of amateur telescope making and amateur astronomy, hermit
      • Re: [ATM] the future of amateur telescope making and amateur astronomy, Barry Keeney
      • Re: [ATM] the future of amateur telescope making and amateur astronomy, Eric S. Johansson
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, Bengt Rosengren
    • Re: [ATM] the future of amateur telescope making and amateur astronomy, Dominic-Luc Webb
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, James Gort
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, AMaroney
• Re: [ATM] the future of amateur telescope making and amateur astronomy, fundo
  • Message not available
    • Re: [ATM] the future of amateur telescope making and amateur astronomy, Andy Saulietis
      • Message not available
      • Re: [ATM] the future of amateur telescope making and amateur astronomy, Andy Saulietis
      • Re: [ATM] the future of amateur telescope making and amateur astronomy, Mitch
  • <Possible follow-ups>
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, fundo
    • Re: [ATM] the future of amateur telescope making and amateurastronomy, Scott Milligan
  • Re: [ATM] the future of amateur telescope making and amateur astronomy, Bob Lombardi
• [ATM] The future of the Amature Astronomer, Russell Jocoy
• [ATM] The Ultrathin Project, vorblesnak
• [ATM] The Ultrathin project a brief report, vorblesnak
• [ATM] The Ultrathin project, update, vorblesnak
• Re: [ATM] This list and Bob May, Tom and Beth
  • [ATM] OT - Who will be at RTMC, Richard Ozer
    • Re: [ATM] OT - Who will be at RTMC, Don Clement
      • [ATM] OT - Who will be at RTMC, Gil McFarlane
      • Re: [ATM] OT - Who will be at RTMC, old Bob May
      • Re: [ATM] OT - Who will be at RTMC, Gil McFarlane
      • Re: [ATM] OT - Who will be at RTMC, Ross Sackett
      • Re: [ATM] OT - Who will be at RTMC, Richard Ozer
      • Re: [ATM] OT - Who will be at RTMC, Gil McFarlane
      • Re: [ATM] OT - Who will be at RTMC, hermit
      • [ATM] Congratulations to Ross Sackett, Richard Ozer
      • Re: [ATM] Congratulations to Ross Sackett, Ross Sackett
      • Re: [ATM] Congratulations to Ross Sackett, Mel Bartels
      • Re: [ATM] Congratulations to Ross Sackett, Gil McFarlane
• [ATM] This list and spam., Bob May
  • Re: [ATM] This list and spam., Michael Lindner
    • [ATM] Coulter secondary adhessive, Lawrence D. Lopez
      • Re: [ATM] Coulter secondary adhessive, Michael Lindner
      • Re: [ATM] Coulter secondary adhessive, Mike Lockwood
      • Re: [ATM] Coulter secondary adhessive, Lawrence D. Lopez
      • [ATM] New minimalist single-pole 18" ultralight, Ross Sackett
      • Re: [ATM] New minimalist single-pole 18" ultralight, Scott Milligan
      • Re: [ATM] New minimalist single-pole 18" ultralight, Ross Sackett
      • Re: [ATM] New minimalist single-pole 18" ultralight, Peter
      • Re: [ATM] New minimalist single-pole 18" ultralight, Mike Lockwood
      • Re: [ATM] New minimalist single-pole 18" ultralight, Ross Sackett
      • Re: [ATM] New minimalist single-pole 18" ultralight, Mel Bartels
      • Re: [ATM] New minimalist single-pole 18" ultralight, Gary Seronik
      • Re: [ATM] New minimalist single-pole 18" ultralight, Ross Sackett
      • Re: [ATM] New minimalist single-pole 18" ultralight, mbartels
      • Re: [ATM] New minimalist single-pole 18" ultralight, Ross Sackett
      • Re: [ATM] New minimalist single-pole 18" ultralight, mbartels
      • Re: [ATM] New minimalist single-pole 18" ultralight, Ross Sackett
      • Re: [ATM] New minimalist single-pole 18" ultralight, Scott Milligan
      • Re: [ATM] New minimalist single-pole 18" ultralight, Mike Lockwood
      • Re: [ATM] New minimalist single-pole 18" ultralight, Richard
      • Re: [ATM] New minimalist single-pole 18" ultralight, Michael Lindner
      • Re: [ATM] New minimalist single-pole 18" ultralight, Ross Sackett
      • Re: [ATM] New minimalist single-pole 18" ultralight, Michael Lindner
    • Re: [ATM] This list and spam., hermit
      • Re: [ATM] This list and spam., Eric S. Johansson
  • Message not available
    • Re: [ATM] This list and spam., Bob May
  • Message not available
    • Re: [ATM] This list and spam., Bob May
      • [ATM] [Re: This list and spam., Kevin MIchael Zabbo
      • Re: [ATM] [Re: This list and spam., Alexis Cousein
      • Re: [ATM] [Re: This list and spam., Norm Prince
• [ATM] Ultra- thin mirror project, Russell Jocoy
• [ATM] Ultrathin Project update, vorblesnak
  • Re: [ATM] Ultrathin Project update, Richard
    • Re: [ATM] Ultrathin Project update, matt
    • Re: [ATM] Ultrathin Project update, Dominic-Luc Webb
  • <Possible follow-ups>
  • [ATM] Ultrathin Project update, vorblesnak
  • Re: [ATM] Ultrathin Project update, Arjan te Marvelde
    • Re: [ATM] Ultrathin Project update, Richard
  • Re: [ATM] Ultrathin Project update, Arjan te Marvelde
• [ATM] Ultrathin update discussion, vorblesnak
  • Re: [ATM] Ultrathin update discussion, JurasicPa
• [ATM] Wao grit, horace r davis
• [ATM] what is the material, horace r davis
  • Re: [ATM] what is the material, Thomas Janstrom
• [ATM] When a 600 lbs / 270 kg telescope becomes transportable..., Robert Houdart
• [ATM] Zonal Correction, Richard F.L.R. Snashall
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA, Mail System Internal Data